Cisco Unified Presence Administration Guide Release 6.0(1)
Cisco Unified Presence Settings
Downloads: This chapterpdf (PDF - 334.0KB) The complete bookPDF (PDF - 2.81MB) | Feedback

Cisco Unified Presence Settings

Table Of Contents

Cisco Unified Presence Settings

Configuring Cisco Unified Presence Settings

Cisco Unified Presence Configuration Settings

Related Topics


Cisco Unified Presence Settings


Use Cisco Unified Presence settings to configure global parameters that affect all Cisco Unified Presence services and applications.

Configuring Cisco Unified Presence Settings

This section describes how to configure Cisco Unified Presence settings.

Procedure


Step 1 Choose Cisco Unified Presence > Settings.

The Cisco Unified Presence Settings window displays.

Step 2 Configure the Cisco Unified Presence settings, as shown in Table 8-1.

Step 3 To save your settings, click the Save icon that displays in the tool bar in the upper, left corner of the window (or click the Save button that displays at the bottom of the window).


Cisco Unified Presence Configuration Settings

Table 2-1 describes the server configuration settings. For related procedures, see the "Related Topics" section.

Table 8-1 Cisco Unified Presence Settings 

Field
Description

Enable Instant Messaging check box

Check this check box to enable instant messaging on this Cisco Unified Presence cluster. This setting affects the Cisco IP Phone Messenger service, the SIP Proxy, and Cisco Unified Personal Communicator.

Default setting: Enabled

Enable Publish to Cisco Unified Communications Manager check box

Note This field only displays when you connect to Cisco Unified Communications Manager Release 6.0 or higher.

Check this check box to enable PUBLISH to the associated Cisco Unified Communications Manager. This setting affects the IP Phone Messenger service, the SIP Proxy, and Cisco Unified Personal Communicator.

Default setting: Disabled

Cisco Unified Communications Manager SIP Publish Trunk

Note This field only displays when you connect to Cisco Unified Communications Manager Release 6.0 or higher.

From the drop-down list, choose the appropriate SIP PUBLISH trunk to allow Cisco Unified Presence to monitor phone status from Cisco Unified Communications Manager.

Note You must check the Enable Publish to Cisco Unified Communications Manager check box to enable this parameter.

Note This parameter changes the SIP Publish Trunk on Cisco Unified Communications Manager. In addition, if you change the SIP Publish Trunk parameter on Cisco Unified Communications Manager, this also changes this setting because they are connected.

Default setting: Current Cisco Unified Communications Manager SIP Publish Trunk, as read from AXL


Additional Information

See the "Related Topics" section.

Related Topics

Configuring Cisco Unified Presence Settings

Cisco Unified Presence Configuration Settings