The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes the utility functions that are available on the platform, which include pinging another system and setting up remote support.
The Ping Utility window enables you to ping another server in the network.
To ping another system, follow this procedure:
Procedure
Step 1 From the Cisco IPT Platform Administration window, navigate to Services>Ping.
The Ping Remote window displays.
Step 2 Enter the IP address or network name for the system that you want to ping.
Step 3 Enter the ping interval in seconds.
Step 4 Enter the packet size.
Step 5 Enter the ping count, the number of times that you want to ping the system.
Note When you specify multiple pings, the ping command does not diplay the ping date and time in real time. Be aware that the Ping command displays the data after the number of pings that you specified complete.
Step 6 Choose whether you want to validate IPSec.
Step 7 Click Ping.
The Ping Remote window displays the ping statistics.
From the Remote Account Support window, you can set up a remote account that Cisco support personnel can use to access the system for a specified period of time.
Remote Support generates a pass phrase that is valid for the specified lifetime of the account.
To set up remote support, follow this procedure:
Procedure
Step 1 From the Cisco IPT Platform Administration window, navigate to Services>Remote Support.
The Remote Support Window displays.
Step 2 If no remote support account is configured, click Add.
Step 3 Enter an account name for the remote account and the account life in days.
Note The account name must be at least six-characters long and all lowercase, alphabetic characters.
Step 4 Click Save.
The Remote Support Status window displays. For descriptions of fields on the Remote Support Status window, see Table 7-1.
Step 5 To access the system by using the generated pass phrase, contact your Cisco personnel.