Guest

Cisco Unified IP Phone 8900 Series

Accessibility Features for the Cisco Unified IP Phones 8941 and 8945

  • Viewing Options

  • PDF (967.3 KB)
  • Feedback

Table of Contents

Accessibility Features for the Cisco Unified IP Phones 8941 and 8945

Hearing-Impaired Accessibility Features

Vision-Impaired and Blind Accessibility Features

Mobility-Impaired Accessibility Features

Cisco Unified CM Accessibility Features

Accessibility Features for the Cisco Unified IP Phones 8941 and 8945

The Cisco Unified IP Phones 8941 and 8945 provide accessibility features for the blind, and the visually, hearing, and mobility impaired.

See these sections:


Note In this document, the term phone support pages refers to the web pages that users can access to set up certain features. For Cisco Unified Communications Manager (Release 10.0 and later), these pages are the Self Care Portal. For Cisco Unified Communications Manager (Release 9.1 and earlier), these pages are the User Options web pages.


Hearing-Impaired Accessibility Features

This section describes the accessibility features for the hearing impaired.

Figure 1 shows the features that are supported on the Cisco Unified IP Phones 8941 and 8945. The features are standard and no setup is required, except where exceptions are noted.

The features shown in Figure 1 are described in the following table. Note the additional features described below the table.

Figure 1 Hearing-Impaired Features

 

Table 1 Hearing-Impaired Accessibility Features

Item
Accessibility Feature
Description
1

Visual message-waiting indicator (handset)

Viewable from 360 degrees, this visual indicator also provides an audible message-waiting indicator. Users change the voice-message light on their handset and the audible voice message indicator on their phone by logging in to their phone support pages and accessing the message-indicator settings. Users change the setting to on or off.

Your system administrator can change the setting.

2

Visual notification of phone state

For visual notification of the phone state:

  • Toggle the Mute and Speakerphone buttons on and off to indicate the state of the phone.
  • Use the Mute button to toggle the microphone on or off. When the microphone is muted, the button is lit.
  • Use the Speakerphone button to toggle the speakerphone on or off. When the speakerphone is on, the button is lit.
3

Inline-amplifier support (handset)

Cisco Unified IP Phone handsets support third-party inline amplifiers that users attach to the handset and cord and that sit between the handset and the IP phone.

Cisco Unified IP Phones support these third-party inline amplifiers:

  • Clarity HA-40 Inline Amplifier for Corded Phone.
  • Plantronics EHA40 Inline Amplifier.
4

Adjustable ringtone, pitch, and volume

Users can adjust the ringtone, pitch, and volume by:

  • Pressing the Applications button and selecting Preferences on their phone.
  • Adjusting the volume level for the phone ringer. While the handset is in the cradle and the headset and speakerphone buttons are off, press the Volume button to change the volume.
  • Adjusting the volume level for the headset, handset, or speakerphone. While on a call using the headset, handset, or speakerphone, press the Volume button to change the volume.

Your system administrator can change the settings.

5

Hearing aid compatible (HAC) handset

Cisco Unified IP Phone handsets support these accessibility features:

  • Hearing-aid compatible.
  • Magnetic coupling of the hearing aid.
  • Federal Communications Commission (FCC) loudness requirements for the Americans with Disabilities Act (ADA).
  • Section 508 loudness requirements, which are achieved by using industry-standard inline handset amplifiers.
6

Acoustic coupled TTY and TDD support (handset)

Cisco Unified IP Phones support the following TTY and TDD features:

  • Acoustic or direct connect TTYs from industry-leading manufacturers.
  • Real-time text transmission over phone lines.
  • Hearing and voice carry over phones (HCO/VCO).
  • VoIP network operating at G.711.

For information about setting up TTY, contact your system administrator.

Additional information about third-party accessibility applications for the hearing impaired:

  • Cisco Unified IP Phones provide an interface for third-party accessibility applications from companies such as NexTalk that support these features:

Paging

Visual notification

Ability to provide single number services to support Video Relay, Text Relay, TTY Traffic or voice services

  • Information about NexTalk is available at this URL:

http://www.nextalk.com

  • Information about Tenacity ipTTY is a available at this URL:

http://accessaphone.com/

For more information about third-party applications, contact your system administrator.

Vision-Impaired and Blind Accessibility Features

This section describes the accessibility features for the vision impaired and blind.

Figure 2 shows the features that are supported on the Cisco Unified IP Phones 8941 and 8945. The features are standard and no setup is required, except where exceptions are noted.

The features shown in Figure 2 are described in the following table. Note the additional features described below the table.

Figure 2 Vision-Impaired and Blind Accessibility Features

 

Table 2 Vision-Impaired and Blind Accessibility Features

Item
Accessibility Feature
Description
1

High-contrast visual and audible alert of incoming call

Cisco Unified IP Phones provide an audible alert, and the handset provides a visual alert when the phone receives an incoming call. The handset light strip flashes during incoming calls and stays lit when a voice-mail message is received.

2

Programmable feature buttons

Located to the left of the LCD, the programmable feature buttons allows users to access the following:

  • Phone lines and intercom lines (line buttons)
  • Speed-dial numbers (speed-dial buttons, including the speed-dial Line Status feature)
  • Web-based services, such as a Personal Address Book
  • Phone features, such as Privacy

Buttons illuminate to indicate status:

  • Green, steady: Active call or two-way intercom call
  • Green, flashing: Held call
  • Amber, steady: Privacy in use, one-way intercom call, DND active, or signed in to Hunt Group
  • Amber, flashing: Incoming call or reverting call
  • Red, steady: Remote line in use (shared line or Line Status)

Your system administrator sets up programmable feature buttons for your phone.

3

Back-lit LCD screen and programmable contrast

Users with low vision can adjust the contrast.

4

Softkeys

Large buttons immediately below the LCD provide access to special functions. The function names display on the LCD.

5

Large buttons to access Applications, Contacts, and Messages

Located beside the top-left corner of the keypad, three large buttons provide to easy access to:

  • Applications
  • Contacts
  • Messages

The Messages button is the single button in the cluster. The Applications and Contacts buttons are above the Messages button, with the Applications button on the left and the Contacts button on the right.

6

Navigation cluster

The two-way Navigation bar and the Select button are located beside the top-right corner of the keypad. Use the Navigation bar to move up and down on the LCD. In the center of the cluster is the Select button.

7

Volume key

Located to the left of the keypad, the Volume key allows the user to increase or decrease the volume of the ringer or the sound through the handset, headset, or speakerphone. Press the right side of the rocker key to increase the volume. Press the left side of the rocker key to decrease the volume.

8

Large buttons for Transfer, Conference, Redial, and Hold

Located in the lower-right corner of the phone, four large buttons provide easy access to:

  • Transfer
  • Conference
  • Redial
  • Hold

The Transfer and Conference buttons are located below the Navigation cluster, with the Transfer button on the left and the Conference button on the right. The Redial and Hold buttons are located below the Transfer and Conference buttons, with the Redial button on the left and the Hold button on the right.

9

Standard 12-key layout

Cisco Unified IP Phone keypads provide standard 12-key layout, which enables users to use existing or familiar key positions (including a nib on Key 5).

10

Audible notification of phone state

Located at the lower-left corner of the phone, four large buttons provide easy access to:

  • Headset
  • Speakerphone
  • Mute
  • Video Mute

The Headset and Speakerphone buttons are above the Mute and Video Mute buttons. The Headset and Mute buttons are on the left, and the Speakerphone and Video Mute buttons are on the right.

For audible notification of the phone state, users can:

  • Toggle the Mute and Speakerphone buttons on and off to indicate the state of the phone.
  • Use the Mute button to toggle the microphone on or off. When the microphone is muted, the button is lit.
  • Use the Speakerphone button to toggle the speakerphone on or off. When the speakerphone is on, the button is lit.

Additional information for the vision impaired:

  • The phone supports third-party accessibility applications for the vision impaired.

Cisco Unified IP Phones 8941 and 8945 provide an interface for third-party accessibility applications such as Tenacity accessaphone and the IPblue Virtual Telephone/Global Office (VTGO) 508-compliant.

The VTGO 508-Compliant softphone is a standalone software endpoint that integrates speech application programming interface (SAPI) and provides audible notification (text-to-speech) of the core functions and features of the Cisco Unified IP Phones. VTGO is also compatible with assistive technology. Information is available at the following URL:

http://www.ipblue.com/

Tenacity accessaphone (AAP) is an assistive technology to the Cisco Unified IP Phones. Through the telephony application programming interface (TAPI) and the computer technology integration (CTI) plug-in, AAP enhances the ability to monitor and control the functions of the Cisco endpoint. Core enhancements are full access through the keyboard and text-to-speech.

The AAP technology provides audible notification of the incoming caller ID, full access of call history information, status of the phone and more. Information about Tenacity is available at the following URL:

http://www.tenacitycorp.com

For more information about third-party applications, contact your system administrator.

  • The phone has an adjustable footstand.

Users can easily manipulate an adjustable footstand from flat to 60 degrees to provide optimum phone display viewing and comfortable access to all buttons and keys.

Mobility-Impaired Accessibility Features

This section describes the accessibility features for the mobility impaired.

Figure 3 shows the features that are supported on the Cisco Unified IP Phones 8941 and 8945. The features are standard and no setup is required, except where exceptions are noted.

The features shown in Figure 3 are described in the following table. Note the additional features described below the table.

Figure 3 Mobility-Impaired Features

 

Table 3 Mobility-Impaired Accessibility Features

Item
Accessibility Feature
Description
1

Well-spaced, illuminated buttons that enable easy operation

Depending the phone setup, the programmable feature buttons allows users to access the following:

  • Phone lines and intercom lines (line buttons)
  • Speed-dial numbers (speed-dial buttons, including the speed-dial Line Status feature)
  • Web-based services, such as a Personal Address Book
  • Phone features, such as Privacy

Buttons illuminate to indicate status:

  • Green, steady: Active call or two-way intercom call
  • Green, flashing: Held call
  • Amber, steady: Privacy in use, one-way intercom call, DND active, or signed in to Hunt Group
  • Amber, flashing: Incoming call or reverting call
  • Red, steady: Remote line in use (shared line or Line Status)
2

Large buttons to access Applications, Voice Messages, Contacts, Hold, Transfer, and Conference

Large buttons provide to easy access to phone applications, voice messages, corporate and personal directories, and calling features.

3

Built-in speakerphone

Users can toggle the speakerphone button on and off to indicate the state of the phone. When the speakerphone is on, the button is lit.

4

Tactile-discernible buttons and functions (including a nib on Key 5)

Cisco Unified IP Phone keypads provide the tactile-discernible locator, which enables users to use existing or familiar key positions that can be easily located from the “bump” on the Key 5.

Users do not have to learn new key positions.

Additional information for the mobility impaired:

  • The phone has a dedicated headset jack that enables the auto-answer function.

Users can use a dedicated headset jack that enables auto-answer feature support on either the speakerphone or headset. Incoming calls are then automatically connected after a ring or two.

  • The phone has an adjustable footstand:

Users can easily manipulate an adjustable footstand from flat to 60 degrees to provide optimum phone display viewing and comfortable access to all buttons and keys.

Cisco Unified CM Accessibility Features

Table 4 provides information on the Cisco Unified Communications Manager (Cisco Unified CM) accessibility features.

 

Table 4 Cisco Unified Communications Manager Accessibility Features

Accessibility Feature
Description
Configuration Requirements
For More Information

Programmable Line Key (PLK)

Users can use the line buttons to initiate, answer, or switch to a call on a particular line. A limited number of features, such as speed dial, extension mobility, privacy, Busy Lamp Field (BLF) speed dial, Do Not Disturb (DND), and Service URLs, get assigned to these buttons.

The PLK feature expands the features that can be assigned to the line buttons to include those that softkeys normally control; for example New Call, Call Back, End Call, and Forward All. When these features are configured on the line buttons, they are always visible, so you can have a “hard” New Call key.

Users can access features easily that may be assigned to softkeys normally, which can be too small and difficult to use.

Standard on all Cisco Unified IP Phones; configuration is required.

Your system administrator assigns PLKs to your phone.

See the user guide applicable to your Cisco Unified IP Phone.

Audible Message Waiting Indicator (AMWI)

Cisco Unified IP Phones can send a line-specific stutter dial tone when a voice message is waiting on the phone. Users hear it only when using the line with the waiting messages. When the user goes off hook (on the line for which a voice message has been left), the stutter dial tone is heard.

Users can change the audible voice-message indicator setting by logging in to their User Options web pages (Cisco Unified CM 9.1 and earlier) or Self Care Portal (Cisco Unified CM 10.0 and later), and changing the audible message-indicator setting to On or Off.

Standard on all Cisco Unified IP Phones. Configuration is required:

  • System administrator
  • Phone support pages

See the user guide applicable to your Cisco Unified IP Phone.

Do Not Disturb (Alert and Reject)

The system administrator configures the phone to turn on all audible and visual notifications, turn on ringer only, or to choose the type of alert a phone should play for incoming calls.

Standard on all Cisco Unified IP Phones. Configuration is required.

See the user guide applicable to your Cisco Unified IP Phone.

Busy Lamp Field

Users can use the Busy Lamp Field (BLF) feature to monitor the call state of a directory number (DN) associated with a speed-dial button, call log, or directory listing on the phone.

In addition, users can use BLF pickup to monitor incoming calls on a directory number.

When the DN receives an incoming call, the system alerts the monitoring user, who can then pick up the call.

Standard on all Cisco Unified IP Phones. Configuration is required.

See the user guide applicable to your Cisco Unified IP Phone.

User Options web pages (Cisco Unified CM 9.1 and earlier) or Self Care Portal (Cisco Unified CM 10.0 and later)

The Cisco Unified IP Phone is a network device that enables users to do the following:

  • Share information with other network devices in their company, including their personal computer.
  • Use their computer to log in to their User Options web pages (Cisco Unified CM 9.1 and earlier) or Self Care Portal (Cisco Unified CM 10.0 and later), where they can subscribe to services, set up speed dial and call forwarding numbers, configure ring settings, and create a personal address book.

Standard on all Cisco Unified IP Phones. Configuration is required.

See the user guide applicable to your Cisco Unified IP Phone.