Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
Preface
Downloads: This chapterpdf (PDF - 1.24MB) The complete bookPDF (PDF - 5.52MB) | The complete bookePub (ePub - 848.0KB) | The complete bookMobi (Mobi - 1.61MB) | Feedback

Preface

Preface

Overview

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE and 7962G Administration Guide for Cisco Unified Communications Manager (SCCP and SIP) provides the information you need to understand, install, configure, manage, and troubleshoot the phones on a Voice-over-IP (VoIP) network.

Because of the complexity of an IP telephony network, this guide does not provide complete and detailed information for procedures that you need to perform in Cisco Unified Communications Manager or other network devices.

Related References

Audience

Network engineers, system administrators, and telecom engineers should review this guide to learn the steps that are required to set up Cisco Unified IP Phones. The tasks described in this document involve configuring network settings that are not intended for phone users. The tasks in this manual require a familiarity with Cisco Unified Communications Manager.

Organization

This manual is organized as follows:

Chapter Description

Cisco Unified IP Phone

Provides a conceptual overview and description of the Cisco Unified IP Phones.

Cisco Unified IP Phones and Your Network

Describes how the Cisco Unified IP Phones interact with other key IP telephony components, and provides an overview of the tasks required prior to installation.

Cisco Unified IP Phones Installation

Describes how to properly and safely install and configure the Cisco Unified IP Phones on your network.

Cisco Unified IP Phone Settings

Describes how to configure network settings, verify status, and make global changes to the Cisco Unified IP Phones.

Features, Templates, Services, and Users

Provides an overview of procedures for configuring telephony features, configuring directories, configuring phone button and softkey templates, setting up services, and adding users to Cisco Unified Communications Manager.

Cisco Unified IP Phone Customization

Explains how to customize phone ring sounds, background images, and the phone idle display at your site.

Remote Monitoring

Describes the information that you can obtain from the phone’s web page to remotely monitor the operation of a phone and to assist with troubleshooting.

Model Information, Status, and Statistics

Explains how to view model information, status messages, network statistics, and firmware information from the Cisco Unified IP Phones.

Troubleshooting and Maintenance

Provides tips for troubleshooting the Cisco Unified IP Phone and the Cisco Unified IP Phones Expansion Modules.

Internal Support Web Site

Provides suggestions for setting up a website for providing users with important information about their Cisco Unified IP Phones.

Feature Support by Protocol for Cisco Unified IP Phone

Provides information about feature support for the Cisco Unified IP Phones 7962G, 7942G, 7961G, 7961G-GE, 7941G, and 7941G-GE using the SCCP or SIP protocol with Cisco Unified Communications Manager Release.

International User Support

Provides information about setting up phones in non-English environments.

Technical Specifications

Provides technical specifications of the Cisco Unified IP Phones.

Basic Phone Administration Steps

Provides procedures for basic administration tasks such as adding a user and phone to Cisco Unified Communications Manager and then associating the user to the phone.

Related Documentation

Use the following sections to obtain related information.

Cisco Unified IP Phone 7900 Series Documentation

See the publications that are specific to your language, phone model, and Cisco Unified Communications Manager release. Navigate from the following documentation URL:

http:/​/​www.cisco.com/​c/​en/​us/​support/​collaboration-endpoints/​unified-ip-phone-7900-series/​tsd-products-support-general-information.html

Cisco Unified Communications Manager Documentation

See the Cisco Unified Communications Manager Documentation Guide and other publications that are specific to your Cisco Unified Communications Manager release. Navigate from the following documentation URL:

http:/​/​www.cisco.com/​c/​en/​us/​support/​unified-communications/​unified-communications-manager-callmanager/​tsd-products-support-series-home.html

Cisco Business Edition 5000 Documentation

See the Cisco Business Edition 5000 Documentation Guide and other publications that are specific to your Cisco Business Edition 5000 release. Navigate from the following URL:

http:/​/​www.cisco.com/​c/​en/​us/​support/​unified-communications/​business-edition-5000/​tsd-products-support-series-home.html

Documentation, Support, and Security Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, reviewing security guidelines, and also recommended aliases and general Cisco documents, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http:/​/​www.cisco.com/​c/​en/​us/​td/​docs/​general/​whatsnew/​whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.

Cisco Product Security Overview

This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer, and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute, or use encryption. Importers, exporters, distributors, and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.

Further information regarding U.S. export regulations may be found at http:/​/​www.bis.doc.gov/​index.php/​regulations/​export-administration-regulations-ear.

Guide Conventions

This document uses the following conventions:

Convention

Description

boldface font

Commands and keywords are in boldface.

italic font

Arguments for which you supply values are in italics.

[   ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated by vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and separated by vertical bars.

string

A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.

screen font

Terminal sessions and information the system displays are in screen font.

input font

Information you must enter is in input font.

italic screen font

Arguments for which you supply values are in italic screen font.

^

The symbol ^ represents the key labeled Control - for example, the key combination ^D in a screen display means hold down the Control key while you press the D key.

<   >

Nonprinting characters such as passwords are in angle brackets.


Note


Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication.



Caution


Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.


Warnings use the following convention:

Attention:

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS