Cisco Unified IP Phone 7962G, 7942G, 7961G, 7961G-GE, 7941G, and 7941G-GE User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
Getting Started
Downloads: This chapterpdf (PDF - 43.0KB) The complete bookPDF (PDF - 2.87MB) | Feedback

Getting Started

Table Of Contents

Getting Started

Using this Guide

Finding Additional Information

Accessing Cisco Unified IP Phone 7900 Series eLearning Tutorials

Safety and Performance Information

Cisco Product Security Overview

Accessibility Features


Getting Started


Using this Guide

This guide provides an overview of the features available on your phone. You can read it completely for a solid understanding of your phone's capabilities, or see the following table for pointers to commonly used sections.

If you want to...
Then...

Explore your phone on your own

Press on the phone when you need assistance.

Review safety information

See Safety and Performance Information.

Connect your phone

See Connecting Your Phone.

Use your phone after it is installed

Start with An Overview of Your Phone.

Learn what the button lights mean

See Understanding Buttons and Hardware.

Learn about the phone screen

See Understanding Lines and Calls.

Make calls

See Placing a Call—Basic Options.

Put calls on hold

See Using Hold and Resume.

Mute calls

See Using Mute.

Transfer calls

See Transferring Calls.

Make conference calls

See Making Conference Calls.

Set up speed dialing

See Speed Dialing.

Share a phone number

See Using a Shared Line.

Use your phone as a speakerphone

See Using a Handset, Headset, and Speakerphone.

Change the ring volume or tone

See Changing Phone Settings.

View your missed calls

See Using Call Logs and Directories.

Listen to your voice messages

See Accessing Voice Messages.

See softkey and icon definitions

See the Quick Reference Card in the front of this guide.


Finding Additional Information

You can access the most current Cisco Unified IP Phone documentation on the World Wide Web at this URL:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_user_guide_list.html

You can access the Cisco website at this URL:

http://www.cisco.com/

You can access the most current Licensing Information at this URL:

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/all_models/openssl_license/7900_ssllic.html

Accessing Cisco Unified IP Phone 7900 Series eLearning Tutorials

(SCCP phones only)

Cisco Unified IP Phone 7900 Series eLearning tutorials use audio and animation to demonstrate basic calling features. You can access eLearning tutorials online (for several phones) from your personal computer. Look for the eLearning tutorial (English only) for your phone in the documentation list at the following location:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_user_guide_list.html


Note Although an eLearning tutorial may not be available for your specific Cisco Unified IP Phone, refer to any of the Cisco Unified IP Phone 7900 Series eLearning tutorials for an overview of common Cisco Unified IP Phone features and functionality.


Safety and Performance Information

Refer to these sections for information about the impact of power outages and other devices on your Cisco Unified IP Phone.

Power Outage

Your accessibility to emergency service through the phone is dependent on the phone being powered. If there is an interruption in the power supply, Service and Emergency Calling Service dialing will not function until power is restored. In the case of a power failure or disruption, you may need to reset or reconfigure equipment before using the Service or Emergency Calling Service dialing.

Using External Devices

The following information applies when you use external devices with the Cisco Unified IP Phone:

Cisco recommends the use of good-quality external devices (such as headsets) that are shielded against unwanted radio-frequency (RF) and audio-frequency (AF) signals.

Depending on the quality of these devices and their proximity to other devices such as mobile phones or two-way radios, some audio noise may still occur. In these cases, Cisco recommends that you take one or more of these actions:

Move the external device away from the source of the RF or AF signals.

Route the external device cables away from the source of the RF or AF signals.

Use shielded cables for the external device, or use cables with a better shield and connector.

Shorten the length of the external device cable.

Apply ferrites or other such devices on the cables for the external device.

Cisco cannot guarantee system performance because Cisco cannot control the quality of external devices, cables, and connectors. The system will perform adequately when suitable devices are attached using good-quality cables and connectors.


Caution In European Union countries, use only external speakers, microphones, and headsets that are fully compliant with the EMC Directive [89/336/EC].

Cisco Product Security Overview

This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.

Further information regarding U.S. export regulations may be found at http://www.access.gpo.gov/bis/ear/ear_data.html.

Accessibility Features

A list of accessibility features is available upon request. You can find more information about Cisco accessibility features at this URL:

http://www.cisco.com/web/about/responsibility/accessibility/index.html