Table Of Contents
Cisco Unified IP Phone 7960G and 7940G Release Notes for Firmware Release 8.0(8) (SCCP)
Updated February 22, 2008
Use these release notes with the Cisco Unified IP Phone 7960G and 7940G running SCCP firmware release 8.0(8). This firmware release is compatible with Cisco Unified Communications Manager releases 6.1, 6.0, 5.1, 5.0, 4.3, 4.2, 4.1, 4.0, and 3.3.
These release notes provide the following information:
Cisco Unified IP Phone Documentation
Refer to publications that are specific to your language, phone model and Cisco Unified Communications Manager release. Navigate from the following documentation URL:
Cisco Unified Communications Manager Documentation
Refer to the Cisco Unified Communications Manager Documentation Guide and other publications specific to your Cisco Unified Communications Manager release. Navigate from the following URL:
Cisco Unified Communications Manager Business Edition Documentation
Refer to the Cisco Unified Communications Manager Business Edition Documentation Guide and other publications that are specific to your Cisco Unified Communications Manager release. Navigate from the following URL:
Before using the Cisco Unified IP Phone 7960G or 7940G with Cisco Unified Communications Manager release 3.3 or later, you must install the latest firmware on all Cisco Unified Communications Manager servers in the cluster.
To download and install the firmware, follow these steps:
Step 1 Go to the following URL:
Step 2 To download the firmware for the Cisco Unified IP Phone 7960G and 7940G, select one of the following files and follow the prompts:
•For Cisco Unified Communications Manager 4.3 and earlier:
•For Cisco Unified Communications Manager 5.0(1), 5.0(2), and 5.0(3):
•For Cisco Unified Communications Manager 5.0(4) and later:
Step 3 To download the Readme file, which contains installation instructions for the corresponding firmware, go back to the URL shown in Step 1 and select this file:
Follow the instructions in the Readme file to install the firmware.
This section contains these topics:
Push credential cache retained when registration is complete
When a Cisco Unified IP Phone successfully registers with Unified CM, the push credential cache is cleared. For more information, refer to CSCsl65625.
Real-Time Transport Protocol (RTP) transmit calls allowed during active call in non-secure mode
When a Cisco Unified IP Phone is in a non-secure, active call, RTP transmit is disallowed. For more information, refer to CSCsl73125.
XML Services Interface (XSI) RTP stream is not terminated gracefully
When a Cisco Unified IP Phone restarts, the XSI RTP streams are terminated. For more information, refer to CSCsl95569.
This section contains these topics:
Using Bug Toolkit
Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:
•All severity level 1 or 2 bugs.
•Significant severity level 3 bugs.
You can search for problems by using the Cisco Software Bug Toolkit.
To access Bug Toolkit, you need the following items:
•Cisco.com user ID and password
To use the Software Bug Toolkit, follow these steps:
Step 1 To access the Bug Toolkit, go to http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs.
Step 2 Log on with your Cisco.com user ID and password.
Step 3 To look for information about a specific problem, enter the bug ID number in the "Search for bug ID" field, then click Go.
There are no open caveats for firmware release 8.0(8).
Table 1 lists Severity 1, 2 and 3 defects that are resolved for the Cisco Unified IP Phone 7960G and 7940G using the SCCP version of firmware release 8.0(8).
For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.
Because defect status continually changes, be aware that Table 1 reflects a snapshot of the defects that were resolved at the time this report was compiled. For an updated view of resolved defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.
Table 1 Resolved SCCP Caveats for the Cisco Unified IP Phone 7960G and 7940G
Identifier Headline and Bug Toolkit Link
Domain Name Server (DNS) response parsing stack overflow
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
CCDE, CCVP, Cisco Eos, Cisco StadiumVision, the Cisco logo, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn is a service mark; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0801R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2008 Cisco Systems, Inc. All rights reserved.