Guest

Cisco Unified IP Phone 7900 Series

Cisco Unified IP Conference Station 7935 Release Notes for Firmware Release 3.2(19) (SCCP)

  • Viewing Options

  • PDF (155.6 KB)
  • Feedback
Cisco Unified IP Conference Station 7935 Release Notes for Firmware Release 3.2(19) (SCCP)

Table Of Contents

Cisco Unified IP Conference Station 7935 Release Notes for Firmware Release 3.2(19) (SCCP)

Contents

Related Documentation

New and Changed Information

Installation Notes

Registering the Cisco Unified IP Conference Station with Cisco Unified Communications Manager

Caveats

Using Bug Toolkit

Open Caveats

Resolved Caveats

Obtaining Documentation and Submitting a Service Request


Cisco Unified IP Conference Station 7935 Release Notes for Firmware Release 3.2(19) (SCCP)


July 7, 2008

Use these release notes with a Cisco Unified IP Conference Station 7935 running SCCP firmware release 3.2(19).

The SCCP version of firmware release 3.2(19) is compatible with Cisco Unified Communications Manager releases 6.1, 6.0, 5.1, 5.0, 4.3, 4.2, 4.1, 4.0, 3.3, 3.2, and 3.1.

Contents

These release notes provide the following information:

Related Documentation

New and Changed Information

Installation Notes

Caveats

Obtaining Documentation and Submitting a Service Request

Related Documentation

Cisco Unified IP Phone Documentation

Refer to publications that are specific to your language, phone model and Cisco Unified Communications Manager release. Navigate from the following documentation URL:

http://www.cisco.com/en/US/products/sw/voicesw/tsd_products_support_category_home.html

Cisco Unified Communications Manager Documentation

Refer to the Cisco Unified Communications Manager Documentation Guide and other publications specific to your Cisco Unified Communications Manager release. Navigate from the following URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html

Cisco Unified Communications Manager Business Edition Documentation

Refer to the Cisco Unified Communications Manager Business Edition Documentation Guide and other publications that are specific to your Cisco Unified Communications Manager release. Navigate from the following URL:

http://www.cisco.com/en/US/products/ps7273/tsd_products_support_series_home.html

New and Changed Information

There is no new or changed information for firmware release 3.2(19).

Installation Notes

To load and install the required firmware image for the Cisco Unified IP Conference Station 7935 on Cisco Unified Communications Manager 6.1, 6.0, 5.1, 5.0, 4.3, 4.2, 4.1, 4.0, 3.3, 3.2, and 3.1, follow these steps:

Procedure


Step 1 Go to the following URL:

http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=278875240

Step 2 To download the firmware for Cisco Unified IP Conference Station 7935, click one of the following hyperlinks and follow the prompts:

For Cisco Unified CallManager 4.3 and earlier:

cmterm-7935-sccp.3-2-19.exe

For Cisco Unified CallManager 5.0(1) to 5.0(3):

cmterm-7935-sccp.3-2-19.cop

For Cisco Unified CallManager 5.0(4) and higher:

cmterm-7935-sccp.3-2-19.cop.sgn

Step 3 To download the Readme file, which contains installation instructions for the corresponding firmware, go back to the URL shown in Step 1 and click the appropriate hyperlink.

cmterm-7935-sccp.3-2-19-readme.htm

Step 4 Follow the instructions in the Readme file to install the firmware.


Registering the Cisco Unified IP Conference Station with Cisco Unified Communications Manager

For more information about configuring the Cisco Unified IP Conference Station and directory numbers, refer to the Cisco Unified Communications Manager Administration Guide, Phone Configuration and Directory Number configuration chapters.

To register the Cisco Unified IP Conference Station 7935 with Cisco Unified Communications Manager release 6.1, 6.0, 5.1, 5.0, 4.3, 4.2, 4.1, 4.0, 3.3, 3.2, and 3.1, follow these steps:

Procedure


Step 1 Log in to the Cisco Unified Communications Manager Administration application.

Step 2 For Cisco Unified Communications Manager 4.3 and earlier:

From the menu bar, choose Device > Add a New Device

For Cisco Unified Communications Manager 5.0 and later:

From the menu bar, choose Device > Phone > Add New

The Add a New Device window appears.

Step 3 Select Phone from the Device Type drop-down menu and click Next.

The Add a New Phone window appears.

Step 4 Select the Cisco 7935 phone type from the drop-down menu and click Next.

The Phone Configuration window appears.

Step 5 In the Phone Configuration window, enter information in the mandatory fields, denoted with an `*', such as MAC and Device Pool.

Step 6 For Cisco Unified Communications Manager 4.3 and earlier:

Click Insert

For Cisco Unified Communications Manager 5.0 and later:

Click Save

The Cisco Unified Communications Manager Administration application asks if you want to assign a directory number.

Step 7 Enter the required fields.


Caveats

This section contains these topics:

Using Bug Toolkit

Open Caveats

Resolved Caveats

Using Bug Toolkit

Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:

All severity level 1 or 2 bugs.

Significant severity level 3 bugs.

You can search for problems by using the Cisco Software Bug Toolkit.

To access Bug Toolkit, you need the following items:

Internet connection

Web browser

Cisco.com user ID and password

To use the Software Bug Toolkit, follow these steps:

Procedure


Step 1 To access the Bug Toolkit, go to http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs.

Step 2 Log on with your Cisco.com user ID and password.

Step 3 To look for information about a specific problem, enter the bug ID number in the "Search for bug ID" field, then click Go.


Open Caveats

There are no open defects for the Cisco Unified IP Conference Station 7935 using the SCCP version of firmware release 3.2(19).

Resolved Caveats

Table 1 lists Severity 1, 2 and 3 defects that are resolved for the Cisco Unified IP Conference Station 7935 using the SCCP version of firmware release 3.2(19).

For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.

Because defect status continually changes, be aware that Table 1 reflects a snapshot of the defects that were resolved at the time this report was compiled. For an updated view of resolved defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.

Table 1 Resolved Caveats for the Cisco Unified IP Conference Station 7935 

Identifier
Headline and Bug Toolkit Link

CSCsi71403

Cisco Unified IP Conference Station 7935 and 7936 do not retrieve their configuration file on restart

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi71403

CSCsk90301

Softkey template is not shown during `Call Forward All'

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk90301

CSCsk90331

Cisco Unified IP Conference Station rings continuously even when it is set to ring once

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk90331

CSCsk92516

Answer softkey is not displayed for second incoming call a scenario

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk92516

CSCsk94269

Cisco Unified IP Conference Station is not able to play bell ringer for an external call

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk94269

CSCsl03913

Cisco Unified IP Conference Station does not ring with the ring tone set in a scenario

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl03913

CSCsl03926

Display goes blank in a scenario involving translation pattern

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl03926

CSCsl07815

Cisco Unified IP Conference Station is not able to end the call in a scenario

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl07815

CSCsl77050

Sluggish web server behavior in Cisco Unified IP Conference Station 7936 and 7935

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl77050

CSCsm12646

Shared line preempts Cisco Unified IP Conference Station 7936 and 7935 dialing

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsm12646

CSCso04948

One-way audio on Cisco Unified IP Conference Station 7936 and 7935 when incoming Real-Time Transport Protocol (RTP) sequence number changes

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCso04948

CSCso40611

Unable to enter characters in the corporate directory search fields

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCso40611

CSCsq14435

Cisco Unified IP Conference Station locks up during conference call

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsq14435

CSCsq37703

On a Cisco Unified IP Conference Station 7936 and 7935, TFTP `NextServer' option takes precedence over TFTP option 66

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsq37703

CSCsq70097

Cisco Unified IP Conference Station reboots when reading Corporate Directory with more than 48 entries

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsq70097

CSCsq76966

One-way audio on Cisco Unified IP Conference Station 7936 and 7935 when incoming RTP sequence and synchronization source (ssrc) changes

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsq76966


Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.