Guest

Cisco Unified IP Phone 7900 Series

Cisco Unified IP Phone 7931G Release Notes for Firmware Release 8.3(2) (SCCP)

  • Viewing Options

  • PDF (145.5 KB)
  • Feedback
Cisco Unified IP Phone 7931G Release Notes for Firmware Release 8.3(2) (SCCP)

Table Of Contents

Cisco Unified IP Phone 7931G Release Notes for Firmware Release 8.3(2) (SCCP)

Contents

Related Documentation

Installation Notes

Important Notes

Caveats

Using Bug Toolkit

Open Caveats

Resolved Caveats

Obtaining Documentation, Obtaining Support, and Security Guidelines

Cisco Product Security Overview


Cisco Unified IP Phone 7931G Release Notes for Firmware Release 8.3(2) (SCCP)


August 10, 2007

Use these release notes with a Cisco Unified IP Phone 7931G running SCCP firmware release 8.3(2).

Firmware release 8.3(2) is compatible with Cisco Unified Communications Manager release 6.0.

Contents

These release notes provide the following information. You might need to notify your users about some of the information provided in this document.

Related Documentation

Installation Notes

Important Notes

Caveats

Obtaining Documentation, Obtaining Support, and Security Guidelines

Related Documentation

Cisco Unified IP Phone Documentation

Refer to publications that are specific to your language, phone model and Cisco Unified Communications Manager release. Navigate from the following documentation URL:

http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html

Cisco Unified Communications Manager Documentation

Refer to the Cisco Unified Communications Manager Documentation Guide and other publications specific to your Cisco Unified Communications Manager release. Navigate from the following URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html

Cisco Unified Communications Manager Business Edition Documentation

Refer to the Cisco Unified Communications Manager Business Edition Documentation Guide and other publications that are specific to your Cisco Unified Communications Manager release. Navigate from the following URL:

http://www.cisco.com/en/US/products/ps7273/tsd_products_support_series_home.html

Installation Notes

Before using the Cisco Unified IP Phone 7931G with Cisco Unified Communications Manager release 6.0, you must install the latest firmware on all Cisco Unified Communications Manager servers in the cluster.

To download and install the firmware, follow these steps:

Procedure


Step 1 Go to the following URL:

http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser

Step 2 To download the firmware for Cisco Unified IP Phone 7931G, click the following file and follow the prompts.

For Cisco Unified Communications Manager 6.0 and later:

cmterm-7931-sccp.8-3-2.cop.sgn

Step 3 Go back to the URL shown in Step 1, double-click the following hyperlink, and follow the prompts to download the Readme file, which contains installation instructions for the corresponding firmware:

cmterm-7931-sccp.8-3-2-readme.htm

Step 4 Follow the instructions in the Readme file to install the firmware.


Important Notes

When Cisco CallManager Cisco IP Phone Services (CCMCIP) sends a URL that exceeds 255 characters to the IP Phone, the user sees a message on the display indicating an error. This occurs when a user tries to download a ring tone or wallpaper. For more information, refer to CSCsj88175 using the Bug Toolkit.

Caveats

This section contains these topics:

Using Bug Toolkit

Open Caveats

Resolved Caveats

Using Bug Toolkit

Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:

All severity level 1 or 2 bugs.

Significant severity level 3 bugs.

You can search for problems by using the Cisco Software Bug Toolkit.

To access Bug Toolkit, you need the following items:

Internet connection

Web browser

Cisco.com user ID and password

To use the Software Bug Toolkit, follow these steps:

Procedure


Step 1 To access the Bug Toolkit, go to http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs.

Step 2 Log on with your Cisco.com user ID and password.

Step 3 To look for information about a specific problem, enter the bug ID number in the "Search for bug ID" field, then click Go.


Open Caveats

Table 1 lists Severity 1, 2 and 3 defects that are open for Cisco Unified IP Phone 7931G using the SCCP version of firmware release 8.3(2).

For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.

Because defect status continually changes, be aware that Table 1 reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.

Table 1 Open SCCP Caveats for Cisco Unified IP Phone 7931G 

Identifier
Headline and Bug Toolkit

CSCsh04509

SCCP Supervisor endpoint displays codec type for non-transmitted packets

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsh04509

CSCsh78628

Cisco Unified IP Phone web page displays incorrect stream status for recorder calls

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsh78628

CSCsi31712

With silence suppression enabled, host sends Service ID frame with incorrect value of zero

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi31712

CSCsi58837

Implicitly authenticated Cisco Unified IP Phone supplicant loses registration after software configuration for 802.1x

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi58837

CSCsj13288

Cisco Unified IP Phone in Arabic locale displays URL from bottom to top

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj13288

CSCsj14629

Incorrect display of call log with embedded English Caller ID

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj14629

CSCsj14759

Incorrect display of input Arabic letters and English letters

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj14759

CSCsj21560

Ringer volume adjustment lost after power cycle

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj21560

CSCsj34885

Audible flag is not effective for `SendDigits' push

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj34885

CSCsj41419

In Arabic locale, the Cisco Unified IP Phone displays character 'i' the same as 'l'

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj41419


Resolved Caveats

There are no resolved defects for firmware release 8.3(2).

Obtaining Documentation, Obtaining Support, and Security Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Cisco Product Security Overview

This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html. If you require further assistance please contact us by sending email to export@cisco.com.