Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified CallManager 6.0 (SCCP)
Providing Information to Users Via a Website
Downloads: This chapterpdf (PDF - 117.0KB) The complete bookPDF (PDF - 3.02MB) | Feedback

Providing Information to Users Via a Website

Table Of Contents

Providing Information to Users Via a Website

How Users Obtain Support for the Cisco Unified IP Phone

How Users Access the Online Help System on the Phone

How Users Get Copies of Cisco Unified IP Phone Manuals

How Users Subscribe to Services and Configure Phone Features

How Users Access a Voice Messaging System

How Users Configure Personal Directory Entries

Installing and Configuring the Cisco Unified IP Phone Address Book Synchronizer


Providing Information to Users Via a Website


If you are a system administrator, you are likely the primary source of information for Cisco Unified IP Phone users in your network or company. It is important to provide current and thorough information to end users.

Cisco recommends that you create a web page on your internal support site that provides end users with important information about their Cisco Unified IP Phones.

Consider including the following types of information on this site:

How Users Obtain Support for the Cisco Unified IP Phone

How Users Access the Online Help System on the Phone

How Users Get Copies of Cisco Unified IP Phone Manuals

How Users Subscribe to Services and Configure Phone Features

How Users Access a Voice Messaging System

How Users Configure Personal Directory Entries

In addition, make sure to tell users how you have configured their phones. For related information, see the "Configuring Model-Specific Features" section. Also, use the paper label to identify each phone button with line or feature information.

How Users Obtain Support for the Cisco Unified IP Phone

To successfully use some of the features on the Cisco Unified IP Phone (including speed dial, services, and voice messaging system options), users must receive information from you or from your network team or be able to contact you for assistance. Make sure to provide end users with the names of people to contact for assistance and with instructions for contacting those people.

How Users Access the Online Help System on the Phone

This Cisco Unified IP Phone 7931G provides access to a comprehensive online help system. To view the main help menu on a phone, take one of these actions:

If the phone is registered with Cisco Unified Communications Manager, press the Application Menu button, then choose Help from the list of applications.

By default, the Application Menu button is line button 24 (the top left line button).

If the phone is not registered with Cisco Unified Communications Manager, press the Settings softkey and then choose Help.

Main menu topics include:

About Your Cisco Unified IP Phone—Descriptive information about the phone model

How do I...?—Procedures and information about commonly-used phone tasks

Calling Features—Descriptions and procedures for using calling features, such as conference and transfer

Help—Tips on using and accessing Help

You can also use the help system to obtain information about softkeys, menu items, and the help system itself. Refer to Cisco Unified IP Phone 7931G for Cisco Unified Communications Manager 6.0 for more information.

How Users Get Copies of Cisco Unified IP Phone Manuals

You should provide end users with access to user documentation for the Cisco Unified IP Phones. Cisco Unified IP Phone 7931G for Cisco Unified Communications Manager 6.0 includes detailed user instructions for key phone features.

There are several Cisco Unified IP Phone models available, so to assist users in finding the appropriate documentation on the Cisco website, Cisco recommends that you provide links to the current documentation. If you do not want to or cannot send users to the Cisco website, Cisco suggests that you download the PDF files and provide them to end users on your website.

Documentation is also available on the CD-ROM titled Cisco Unified Communications Manager Design, Installation, and Operation Guides, which is distributed with Cisco Unified Communications Manager releases.

For a list of available documentation, go to the Cisco Unified IP Phone website at this URL:

http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_
series_home.html

For more information about viewing or ordering documentation, see the "Obtaining Documentation, Obtaining Support, and Security Guidelines" section.

How Users Subscribe to Services and Configure Phone Features

End users can perform a variety of activities using the Cisco Unified CM User Options web pages. These activities include subscribing to services, setting up speed dial and call forwarding numbers, configuring ring settings, and creating a personal address book. Keep in mind that configuring settings on a phone using a website might be new for your end users. You need to provide as much information as possible to ensure that they can successfully access and use the Cisco Unified CM User Options web pages.

Make sure to provide end users with the following information about the Cisco Unified CM User Options web pages:

The URL required to access the application. This URL is:

http://server_name/CCMUser/, where server_name is the host on which the web server is installed.

A user ID, default password, and default PIN are needed to access the application.

These settings correspond to the values you entered when you added the user to Cisco Unified Communications Manager (see the "Adding Users to Cisco Unified Communications Manager" section).

A brief description of what a web-based, graphical user interface application is, and how to access it with a web browser.

An overview the tasks that users can accomplish using the web page.

You can also refer users to Cisco Unified IP Phone 7931G Guide, which is available at this URL:

http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_
series_home.html

How Users Access a Voice Messaging System

Cisco Unified Communications Manager lets you integrate with many different voice mail messaging systems, including the Cisco Unity voice messaging system. Because you can integrate with a variety of systems, you must provide users with information about how to use your specific system.

You should provide this information to each user:

How to access the voice mail messaging system account.

Make sure that you have used Cisco Unified Communications Manager to configure the Messages button on the Cisco Unified IP Phone.

Initial password for accessing the voice messaging system.

Make sure that you have configured a default voice messaging system password for all users.

How the phone indicates that voice messages are waiting.

Make sure that you have used Cisco Unified Communications Manager to set up a message waiting indicator (MWI) method.

How Users Configure Personal Directory Entries

Users can configure personal directory entries on the Cisco Unified IP Phone. To configure personal directory, users must have access to the following:

Cisco Unified CM User Options web pages—Make sure that users know how to access their User Options web pages. See the "How Users Subscribe to Services and Configure Phone Features" section for details.

Cisco Unified IP Phone Address Book Synchronizer—Make sure to provide users with the installer for this application. To obtain the installer, choose Application > Install Plugins from Cisco Unified Communications Manager and click Cisco IP Phone Address Book Synchronizer.

See the "Installing and Configuring the Cisco Unified IP Phone Address Book Synchronizer" section for information about installing the Cisco Unified IP Phone Address Book Synchronizer.

Installing and Configuring the Cisco Unified IP Phone Address Book Synchronizer

Use this tool to synchronize data stored in your Microsoft Windows, Microsoft Outlook, or Microsoft Outlook Express address book(s) with the Cisco Unified Communications Manager directory and Personal Address Book service.

Installing the Synchronizer


Step 1 Get the Cisco Unified IP Phone Address Book Synchronizer installer file from your system administrator.

Step 2 Double-click the TabSyncInstall.exe file provided by your system administrator.

The Welcome to Cisco Unified IP Phone Address Book Synchronizer window appears.

Step 3 Click Next.

The License Agreement window appears.

Step 4 Read the license agreement information, and click Yes to accept.

The Choose Destination Location window appears.

Step 5 Choose the directory in which you want to install the application and click Next.

The Start Copying Files window appears.

Step 6 Verify that you have chosen the correct directory, and click Next.

The installation wizard installs the application to your computer. When the installation is complete, the InstallShield Wizard Complete window appears.

Step 7 Click Finish.

Step 8 To complete the process, you must next configure the Synchronizer.


Configuring the Synchronizer


Step 1 Open the Cisco Unified IP Phone Address Book Synchronizer.

If you accepted the default installation directory, you can open the application by choosing Start > Programs > Cisco > IP Phone Address Synchronizer.

Step 2 To configure user information, click the Password button.

The Cisco Unified IP Phone User window appears.

Step 3 Enter the Cisco Unified IP Phone user name and password and click OK.

Step 4 To configure synchronization rules, click the Rules Options button.

Step 5 Choose the synchronization method that you want to use and click OK.

Step 6 To configure Cisco Unified Communications Manager information, click the CCM Server button.

The Configure Cisco Unified Communications Manager Web Server window appears.

Step 7 Enter the IP address or host name of the Cisco Unified Communications Manager and click OK.

If you do not have this information, contact your system administrator.

Step 8 Click the Password button.

The Cisco Unified IP Phone User window appears.

Step 9 Enter your user identification and password for the Cisco Unified IP Phone User Options application.

Step 10 To start the directory synchronization process, click the Synchronize button.

The Synchronization Status window provides information on the status of the address book synchronization. If you chose the user intervention for duplicate entries rule and you have duplicate address book entries, the Duplicate Selection window appears. Choose the entry that you want to include in your Personal Address Book and click OK.

When synchronization completes, click Exit to close the Cisco Unified IP Phone Address Book Synchronizer.