Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Accessory Guide
Third-Party Accessories
Downloads: This chapterpdf (PDF - 1.03MB) The complete bookPDF (PDF - 2.32MB) | The complete bookePub (ePub - 382.0KB) | Feedback

Third-Party Accessories

Third-Party Accessories Overview

Accessories for the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G are available from third parties.


Note


Cisco does not test third-party accessories. Cisco recommends that you test them in your environment before providing them to users.


Headsets

The Cisco Unified Wireless IP Phone supports the use of third-party wired and Bluetooth wireless headsets.

For wired headsets, the phone requires a headset or ear bud with a 2.5 mm, 3-band, 4-conductor plug.

Bluetooth Wireless Headsets

Using Bluetooth wireless headsets increases battery power consumption on your phone and results in reduced talk time.

For a Bluetooth wireless headset to work, it does not need to be within direct line-of-sight of the phone, but some barriers, such as walls or doors, and interference from other electronic devices, can affect the connection.

Headset Choices

The audio portion of a headset must sound good to you and the person you are speaking to. Sound is subjective and Cisco cannot guarantee the performance of any headsets, but some of the headsets on the sites listed below have been reported to perform well on Cisco Unified Wireless IP Phones.

For information about headsets, go to the following URLs:

http:/​/​www.plantronics.com

http:/​/​www.jabra.com

http:/​/​www.jawbone.com


Note


Cisco recommends that you test your headsets in your own environment to determine suitable performance.