Cisco IP Phone Guide 7902G for Cisco CallManager 4.0.2
Customizing Phone Settings
Downloads: This chapterpdf (PDF - 24.0KB) The complete bookPDF (PDF - 842.0KB) | Feedback

Customizing Phone Settings

Table Of Contents

Customizing Phone Settings

Adjusting the Volume

Setting Up Speed Dial Buttons


Customizing Phone Settings


You can personalize your Cisco IP Phone 7902G by adjusting the settings, as described in the tables below.

Adjusting the Volume

The table below describes how to adjust and save volume levels on your phone.

If you want to...
Then...

Adjust the volume level for a call

Press Volume when the handset is in use.

The volume is saved automatically when you release the Volume button.

Adjust the volume level for the ringer

Press Volume while the handset is in the cradle. The new ringer volume is saved automatically when you release the Volume button.


Setting Up Speed Dial Buttons

Speed dial numbers allow you to quickly dial phone numbers without requiring you to enter the phone number each time. You can create up to four speed dial numbers on your phone using the User Options web pages. (See the "Logging In to the User Options Web Pages" section for more information about your User Options pages.)


Note Your system administrator can assign speed dial buttons to your phone; they can also restrict the number of speed dial numbers that you can configure.


If you want to...
Then...

Add speed dial numbers

Log in to your User Options web pages, select your device, then choose Add/Update Speed Dials from the main menu. In the Speed Dial Settings on Phone section, enter a phone number and label for each available speed dial button. Enter the number exactly as you would dial it from your desk phone. For example, enter an access code such as 9 or the area code, if necessary. Enter the speed dial information on your phone label.



Tip For information about making a speed dial call, see the "Placing a Call" section on page 9.