Table Of Contents
Cisco Unified IP Phone 6901 and 6911 Release Notes for Firmware Release 9.2(2) (SCCP and SIP)
Enhanced Version Negotiation with Cisco Unified Manager Express
Where to Find More Information
Where to Find More Information
Installing Cisco Unified Communications Manager
Installing Cisco Unified Communications Manager Express
Installing Firmware Release 9.2(2) for SCCP
Installing Firmware Release 9.2(2) for SIP
Obtaining Documentation and Submitting a Service Request
Cisco Unified IP Phone 6901 and 6911 Release Notes for Firmware Release 9.2(2) (SCCP and SIP)
Published: November 29, 2011
The information in this release note applies to the Cisco Unified IP Phone 6901 and 6911.
Use these release notes with Cisco Unified IP Phone 6901 and 6911 running firmware release 9.2(2). This version of firmware is compatible with Cisco Unified Communications Manager 7.1.5 and later.
Contents
These release notes provide the following information. You might need to notify your users about some of the information provided in this document.
•Obtaining Documentation and Submitting a Service Request
Related Documentation
Cisco Unified IP Phone Documentation
Refer to publications that are specific to your language, phone model and Cisco Unified Communications Manager release. Navigate from the following documentation URL:
http://www.cisco.com/en/US/products/ps10326/tsd_products_support_series_home.html
Cisco Unified Communications Manager Documentation
Refer to the Cisco Unified Communications Manager Documentation Guide and other publications specific to your Cisco Unified Communications Manager release. Navigate from the following URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
Cisco Unified Communications Manager Business Edition 5000 Documentation
Refer to the Cisco Unified Communications Manager Business Edition 5000 Documentation Guide and other publications that are specific to your Cisco Unified Communications Manager Business Edition 5000 release. Navigate from the following URL:
http://www.cisco.com/en/US/products/ps7273/tsd_products_support_series_home.html
Cisco Business Edition 3000 Documentation
Refer to the Cisco Business Edition 3000 Documentation Guide and other publications that are specific to your Cisco Business Edition 3000 release. Navigate from the following URL:
http://www.cisco.com/en/US/products/ps11370/tsd_products_support_series_home.html
Cisco Unified Communications Manager Express Documentation
Refer to the Cisco Unified Communications Manager Express Documentation Guide and other publications specific to your Cisco Unified Communications Manager Express release. Navigate from the following URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
New and Changed Information
This section contains the following topics:
•Enhanced Version Negotiation with Cisco Unified Manager Express
Enhanced Version Negotiation with Cisco Unified Manager Express
The Enhanced Version Negotiation with Cisco Unified Manager Express (Unified CME) feature offers an improved conference call flow process for users of the following Cisco IP Phones (SIP only):
•Cisco Unified IP Phone 6901
•Cisco Unified IP Phone 6911
Where to Find More Information
•Cisco Unified Communications Manager Express System Administrator Guide
Jitter Buffer
The Jitter Buffer feature handles jitter from 10 milliseconds (ms) to 1000 ms for audio streams.
This feature is supported on the following Cisco Unified IP Phones (SCCP and SIP):
•Cisco Unified IP Phone 6901
•Cisco Unified IP Phone 6911
Where to Find More Information
•Cisco Unified Communications Manager Features and Services Guide
Installation Note
This section contains these sections:
•Installing Cisco Unified Communications Manager
•Installing Cisco Unified Communications Manager Express
•Installing Firmware Release 9.2(2) for SCCP
•Installing Firmware Release 9.2(2) for SIP
Installation Upgrade Notes
Direct upgrades, using load files, are supported to firmware release 9.2(2). You can use the following firmware release file for these direct upgrades:
cmterm-6901_6911-sccp.9-2-2-5.cop.sgn
cmterm-6901_6911-sip.9-2-2-2.cop.sgn
Note A direct upgrade from firmware release SCCP 9.0(2) to 9.2(2) SCCP or SIP is supported, and conversion between firmware release SCCP and SIP is also supported.
Installing Cisco Unified Communications Manager
Before using the Cisco Unified IP Phone with Cisco Unified Communications Manager, you must install the latest firmware on all Cisco Unified Communications Manager servers in the cluster.
To download and install the Cisco Unified Communications Manager version, follow these steps:
Procedure
Step 1 Go to the following URL:
http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=278875240
Step 2 Log in to the Products > Voice and Unified Communications > IP Telephony.
Step 3 Choose Call Control > Cisco Unified Communications Manager (CallManager).
Step 4 Choose your Cisco Unified Communications Manager version.
Installing Cisco Unified Communications Manager Express
To download and install the Cisco Unified Communications Manager Express version, follow these steps:
Procedure
Step 1 Go to the following URL:
http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=278875240
Step 2 Log in to the Products > Voice and Unified Communications > IP Telephony.
Step 3 Choose Call Control > Cisco Unified Communications Manager Express.
Step 4 Choose your Cisco Unified Communications Manager Express version from the Select a File to Download section.
Installing Firmware Release 9.2(2) for SCCP
To download and install the phone firmware, follow these steps:
Procedure
Step 1 Go to the following URL:
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240
Step 2 Log in to the Products > Voice and Unified Communications > IP Telephony > IP Phones > Cisco Unified IP Phone 6900 Series.
Step 3 Choose your phone type.
Step 4 Choose Skinny Client Control Protocol (SCCP) Software.
Step 5 Choose 9.2(2) under the Latest Releases folder.
Step 6 To download the SCCP firmware for the Cisco Unified IP Phone, choose one of the following firmware releases. Click the Download Now or Add to cart button and follow the prompts:
•cmterm-6901_6911-sccp.9-2-2-5.cop.sgn
Note If you added the firmware file to the cart, click the Download Cart link when you are ready to download the file.
Step 7 Click the + next to the firmware file name in the Download Cart section to access additional information about this file. The hyperlink for the Readme files is in the Additional Information section, which contains installation instructions for the corresponding firmware:
•cmterm-6901_6911-sccp.9-2-2-5-readme.html
Step 8 Follow the instructions in the Readme file to install the firmware.
Installing Firmware Release 9.2(2) for SIP
To download and install the phone firmware, follow these steps:
Procedure
Step 1 Go to the following URL:
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240
Step 2 Log in to the Products > Voice and Unified Communications > IP Telephony > IP Phones > Cisco Unified IP Phone 6900 Series.
Step 3 Choose your phone type.
Step 4 Choose Session Initiation Protocol (SIP) Software.
Step 5 Choose 9.2(2) under the Latest Releases folder.
Step 6 To download the SIP firmware for the Cisco Unified IP Phone, choose one of the following firmware releases. Click the Download Now or Add to cart button and follow the prompts:
•cmterm-6901_6911-sip.9-2-2-2.cop.sgn
Note If you added the firmware file to the cart, click the Download Cart link when you are ready to download the file.
Step 7 Click the + next to the firmware file name in the Download Cart section to access additional information about this file. The hyperlink for the Readme files is in the Additional Information section, which contains installation instructions for the corresponding firmware:
•cmterm-6901_6911-sip.9-2-2-2-readme.html
Step 8 Follow the instructions in the Readme file to install the firmware.
Caveats
This section contains these topics:
Using Bug Toolkit
Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:
•All severity level 1 or 2 bugs.
•Significant severity level 3 bugs.
You can search for problems by using the Cisco Software Bug Toolkit.
To access Bug Toolkit, you need the following items:
•Internet connection
•Web browser
•Cisco.com user ID and password
To use the Software Bug Toolkit, follow these steps:
Procedure
Step 1 To access the Bug Toolkit, go to http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs.
Step 2 Log on with your Cisco.com user ID and password.
Step 3 To look for information about a specific problem, enter the bug ID number in the "Search for bug ID" field, then click Go.
Open Caveats
There are no open caveats for firmware release 9.2(2).
Resolved Caveats
Table 1 lists Severity 1, 2 and 3 defects that are resolved for the Cisco Unified IP Phone 6901 and 6911 using SCCP firmware release 9.2(2).There were no defects that are resolved for the Cisco Unified IP Phone 6901 and 6911 using SIP firmware release 9.2(2).
For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.
Because defect status continually changes, be aware that the tables reflect a snapshot of the defects that were resolved at the time this report was compiled. For an updated view of resolved defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.
Table 1 Resolved Caveats for the Cisco Unified IP Phone 6901 and 6911 for Firmware Release 9.2(2) SCCP
Identifier HeadlineIntermittent one way audio on 6901 phones
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
© 2011 Cisco Systems, Inc. All rights reserved.