Guest

Cisco Unified Communications Manager Express

Cisco CallManager Express 3.4 SNMP MIB Support

  • Viewing Options

  • PDF (923.5 KB)
  • Feedback
Cisco CallManager Express SNMP MIB Support

Table Of Contents

Cisco CallManager Express SNMP MIB Support

Contents

Restrictions for Cisco CME SNMP MIB Support

Prerequisites for Cisco CME SNMP MIB Support

Information About Cisco CME SNMP MIB Support

Network Management Overview

MIB Overview

SNMP Overview

CISCO-CCME-MIB Overview

How to Configure Cisco CME SNMP MIB Support

Enabling the SNMP Agent

Verifying Enabling of the SNMP Agent

Enabling Cisco CME Network-Management Notifications and Traps

Configuration Examples for Cisco CME SNMP MIB Support

Cisco CME SNMP MIB Support Reference Tables

Summary List of Objects

Summary List of Notifications and Traps

SNMP MIB Tables

CISCO-CCME-MIB Objects

Cisco CME MIB Object Groups

Correlation of Tables

Cisco CME Traps and Notifications

Additional References

Related Documents

MIBs

RFCs

Technical Assistance

Glossary

Feature Information for Cisco CME SNMP MIB Support


Cisco CallManager Express SNMP MIB Support


First Published: Dec 2005
Last Updated: Jan 2006

Cisco CallManager Express (Cisco CME) is a call-processing application that runs under Cisco IOS software. It enables small business customers and small enterprise branch offices to deploy VoIP telephony and data on a single platform.

The Cisco CME SNMP MIB Support feature provides support for the CISCO-CCME-MIB.

Finding Feature Information in This Module

Your Cisco IOS software release may not support all of the features documented in this module. To reach links to specific feature documentation in this module and to see a list of the releases in which each feature is supported, use the "Feature Information for Cisco CME SNMP MIB Support" section.

Finding Support Information for Platforms and Cisco IOS Software Images

Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear.

Contents

Restrictions for Cisco CME SNMP MIB Support

Prerequisites for Cisco CME SNMP MIB Support

Information About Cisco CME SNMP MIB Support

How to Configure Cisco CME SNMP MIB Support

Configuration Examples for Cisco CME SNMP MIB Support

Cisco CME SNMP MIB Support Reference Tables

Additional References

Glossary

Feature Information for Cisco CME SNMP MIB Support

Restrictions for Cisco CME SNMP MIB Support

Cisco CME configuration is not provided through SNMP.

No password or encrypted objects are provided.

Objects that are not part of Cisco CME are out of scope for the CISCO-CCME-MIB.

SIP phone details that cannot be seen by underlying Cisco IOS SRST layers, such as the Ethernet address, are not provided.

Depending on the platform used, the maximum number of ephone licenses supported ranges from 24 to 240.

Performance characteristics of the Cisco CME SNMP modules vary significantly depending on how often bulk data is requested by the SNMP managers.

SNMP bulk data can consume significant CPU and DRAM resources, and even network bandwidth. We recommend that management stations minimize the statistical sampling intervals as much as possible. Even though CISCO-CCME-MIB objects are grouped to reduce the unnecessary bulk data that can be fetched at a burst, the Cisco IOS SNMP agent does not enforce the data volume or the frequency at which SNMP managers make requests to the SNMP agent.

To reduce performance impact, you can use the traps provided by these MIBs by using asynchronous fault notification and traps to help isolate a fault.

There are few leaf objects, and they are light weighted and important (specified in active Group of the MIBs). They can be sampled at relatively short intervals to help gather the load on the Cisco CME components.

Cisco IOS software supports SNMP versions 1, 2c, and 3 (SNMPv1, SNMPv2c, and SNMPv3). The SRST MIB is compliant with SNMPv2c and SNMPv3.

External SNMP managers are required; they issue SNMP queries and also accept SNMP notifications and traps. SNMP managers include tools, such as basic Scotty command-line tools, HP-OpenView, SunNet managers, IBM Netview, Tivoli, NetIQ, and so on.

To provide complete monitoring solutions, SNMP managers can interface with existing Cisco IOS MIBs that address individual components and build a schema (or view) that helps monitor objects that suit their configuration or needs. For Cisco CME-related scenarios, CISCO-VOICE-DIAL-CONTROL-MIB, various hardware-interface MIBs, and the CISCO-CCM-MIB are available.

Prerequisites for Cisco CME SNMP MIB Support

Configure Cisco CallManager Express 3.4 on your system.

Ensure that you are using the following supported voice gateways:

Cisco 1700 series: Cisco 1751V, Cisco 1760, or Cisco 1760V

Cisco 2600 series: Cisco 261xXM, Cisco 262xXM, Cisco 265xXM, or Cisco 2691

Cisco 3700 series: Cisco 3725 or Cisco 3745

Cisco 2800 series: Cisco 2801, Cisco 2811, Cisco 2821, or Cisco 2851

Cisco 38oo series: Cisco 3825 or Cisco 3845

Cisco IAD 243x

Ensure that you are using the following IP phone types:

Cisco IP Phone 7902, Cisco IP Phone 7905G

Cisco IP Phone 7910, Cisco IP Phone 7912G

Cisco IP Expansion Module 7914

Cisco wireless IP 7920

Cisco IP conference station 7935 and Cisco IP conference station 7936

Cisco IP Phone 7940G, Cisco IP Phone 7960G, Cisco IP Phone 7970G

Cisco ATA 186/188 analog telephone adaptors

Cisco VG224 analog phone gateway

Ensure that an SNMP manager is available on the network.


Note For information on configuring an SNMP server for use with a MIB, see the "Configuring SNMP Support" chapter of the Cisco IOS Configuration Fundamentals and Network Management Configuration Guide at http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/ffun_c/fcfprt3/fcf014.htm


Configure an SNMP agent for the router on which the CISCO-CCME-MIB feature is to be used.


Note For information on this configuration, see the "Enabling the SNMP Agent" section.


Configure Cisco IP phones and ephone-dns on the router.


Note For configuration information, see the Cisco CME documents listed at http://www.cisco.com/en/US/partner/products/sw/voicesw/ps4625/products_documentation_roadmap09186a0080189132.html)


Ensure that the traps are defined in network-management-system software.

Ensure that alarm events are not put into log-only mod, but rather come up as alarms.

Obtain the following licenses for Cisco CME operation:

A base Cisco CME feature license

A phone-seat license for each phone

Information About Cisco CME SNMP MIB Support

This section contains the following information:

Network Management Overview

MIB Overview

SNMP Overview

CISCO-CCME-MIB Overview

Network Management Overview

Network management takes place between two major types of systems or devices:

Those in control (managing systems or managers), most commonly a network-management system (NMS)

Those observed and controlled (managed devices), most commonly hosts, servers, or network components such as routers and intelligent repeaters

The manager runs a network-management application, called an agent, that sends requests to the managed device. The managed device runs an agent that receives and responds to those requests.

The managed device maintains values for a number of variables and can access and report those by means of its agent, as required, to the NMS. For example, an agent can access and report data such as the number of bytes and packets in and out of the device or the number of broadcast messages sent and received. Information that an agent can access and report back to the NMS is called a managed object.

An NMS can monitor the status of a managed device by requesting the value of a managed object. This is called a "get" operation. It can also control the device by requesting that it change the value of a managed object. This is called a "set" operation.

A typical NMS deployment is shown in Figure 1.

Figure 1 Typical Cisco CME Router Deployment with Network-Management Components

MIB Overview

Managed objects are contained in a management information base (MIB). The MIB defines all information that can be seen or changed by the manager.

MIB Sources

MIBs come from various sources:

Internet Standard—On the IETF standards track at proposed, draft, or full standard status, and published as requests for comment (RFCs). You must capture the MIB definition and place it within the Cisco Enterprise MIB space (not in the Experimental branch).

Enterprise—Defined by other organizations, usually individual companies including Cisco Systems. Enterprise MIBs instrument technology not covered by standard MIBs, either completely or as an extension to a standard MIB.

Cisco—Cisco enterprise-specific (also called proprietary or private, even though publicly documented).

Other company—Non-Cisco enterprise-specific. It is occasionally appropriate to implement a MIB defined by some other company, especially for technology that they originated and instrumented. You must capture the MIB definition, but leave the original wherever in the MIB space that the originating company put it.

A similar concept of the MIB must be shared by both manager and agent.

MIB Objects

A MIB is an abstract database, structured conceptually as a tree (see Figure 2) with branches and leaves. Each leaf, called an object, is typically a counter or a protocol status.


Note Usage of the term object within the context of a MIB differs from its usage within the context of the OSI model. An OSI object is a network entity, such as a router or a protocol, that has attributes. OSI attributes and MIB objects are essentially the same concept—that is, individual data values.


An object is denoted by a text string that is encoded into an integer. For example, the object authAddr is denoted by 5.

The location of the object within the MIB structure is denoted by its object identifier, which is the sequence of numbers along the path from tree root to object.

For example, the Internet standard MIB is denoted by the object identifier 1.3.6.1.2.1 (or, alternatively, as iso.org.dod.internet.mgmt.mib).

Figure 2 Internet MIB Hierarchy

MIB objects have certain permitted values, as shown in Table 5.

Table 5 MIB Objects and Values 

MIB Object (in order of appearance)
Value

Object type

Type of MIB object

Syntax

Data type that models the object

Access

Maximum level of access. Possible values, from highest to lowest, include the following:

Read-create—Instances of the object may be read, written, and created

Read-write—Instance of the object may be read or written, but not created

Read-only—Instances of the object may be read but not written or created

Accessible-for-notify—Instances of the object may appear only in notifications

Not-accessible—Instances of the object may not be directly read, written, or created

Status

Status of a managed object. Possible values include the following:

Mandatory—Definition is required and should be implemented

Current—Definition is current

Deprecated—Definition will soon be made obsolete and need no longer be implemented

Obsolete—Managed nodes should not implement the object

Description

Textual description of the managed object


The following is an example of a MIB object:

tpTDMIfCollectTimeInterval OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
This object shows measurement time interval seconds.
      ::= {tpTDMIfStatTableEntry 1}


NoteDescriptions of supported MIBs and information about how to use them is available on the Cisco MIB website at http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml.

Cisco MIBs are archived in the Cisco FTP server and are accessible by anonymous FTP at ftp://ftpeng.cisco.com/pub/mibs.


SNMP Overview

To enable communication, manager and managed device must adhere to a common framework and a common language, called a protocol. In the Internet network-management framework, that protocol is Simple Network Management Protocol (SNMP), an application-layer protocol for the exchange of network-management information between a manager and a managed device. SNMP governs the structure and behavior of managers, agents, and MIBs. It permits retrieval of critical information from network elements such as routers, switches, and workstations. The Cisco CME Network Management feature uses SNMP to gather remote-site information.

SNMP and its MIBs are defined in a combination of system-specific language and Abstract Syntax Notation 1 (ASN.1) SNMP uses a subset of ASN.1 that is defined in the SNMP Structure of Management Information (SMI).

SNMP may be carried over a wide choice of transport protocols, most commonly User Datagram Protocol over Internet Protocol (UDP/IP). Other possibilities include AppleTalk, Netware, and Ethernet.

As mentioned previously, an SNMP manager such as an NMS monitors the status of managed devices by means of get (read) and set (modify) operations. These operations are listed in Table 6.

Table 6 SNMP Manager Operations 

Operation
Description

get-request

Retrieves the value of a specific variable.

get-next-request

Retrieves the value of the next variable, usually from within a table.

Note With this operation, an SNMP manager does not need to know the exact variable name. A sequential search is performed to find the needed variable from within the MIB.

get-response

Replies to a get-request, get-next-request, get-bulk-request, or set-request.

get-bulk-request

As for a get-next-request, but fills the get-response with up to max-repetition number of get-next interactions.

set-request

Stores a value in a specific variable.

trap

Unsolicited message sent by an SNMP agent to an SNMP manager indicating that some event has occurred.

Note The Cisco trap file, mib.traps, documents the format of the Cisco traps. You can find it on the Cisco host ftp.cisco.com.


Figure 3 shows how the SNMP agent gathers data from the MIB, which is the repository for information about device parameters and network data. The agent can also send traps, or notifications of events of interest, to the manager.

Figure 3 SNMP Network

CISCO-CCME-MIB Overview

You can compile the Cisco MIB with your network-management software. If SNMP is configured on a Cisco Catalyst switch, the SNMP agent can respond to MIB-related queries that are sent by the NMS.

This chapter pertains to the CISCO-CCME-MIB, which addresses objects that pertain to Cisco CME, ephone, and ephone-dns. Apart from that MIB, a voice solution can use existing Cisco IOS MIBS, especially the CISCO-VOICE-DIAL-CONTROL-MIB.

The prototypical standard MIB is MIB-II, the second revision of the original SNMP MIB. MIB-II contains branches for the basic areas of instrumentation such as system, network interfaces, IP, and TCP.

MIB-II

Cisco MIBs are private extensions to the Internet standard MIB-II.

Cisco MIBs are often read-only or have some objects or object groups missing because of security concerns or time requirements for implementation. Since Cisco IOS Release 10.2, developers must document such specifics with AGENT-CAPABILITIES from RFC 1904.


NoteFor information about MIB-II, see RFC 1213 (Management Information Base for Network Management of TCP/IP-based Internets: MIB-II). This RFC includes information on the benefits of the new feature, supported platforms, related documents, troubleshooting tips, configuration examples, and a detailed command reference.

To find what MIBs Cisco implements, start at ftp-eng.cisco.com with ftp://ftp-eng.cisco.com/pub/mibs/README.

This FTP site contains a list of MIBs available for various software versions. It cannot account for MIBs not included in a particular software subset or because a feature is turned off. Whether or not a MIB is included is the function of AGENT-CAPABILITIES descriptions and the snmpORTable (RFC 1907) in later software versions.


Groups and Objects

The CISCO-CCME-MIB enables you to discover, monitor, and send traps to SNMP management applications. It is part of the Cisco management (9) group, which is presented by private.enterprise.cisco.ciscoMgmt. It is uniquely identified within the group by the number 439. Therefore, the ciscoCcmeMIB is 1.3.6.1.4.1.9.9.439.

The CISCO-CCME-MIB is divided into groups as follows:

ciscoCcmeMIBNotifs

ciscoCcmeMIBObjects

ccmeConfig

ccmeActiveStats

ccmeHistoryStats

ciscoCcmeMIBConform

Objects in the CISCO-CCME-MIB can be identified by either of the following methods:

Object identifier—1.3.6.1.4.1.9.9.439.<CCME MIB-variable>

or

Object name—iso(1).org(3).dod(6).internet(1).private(4).enterprise(1).cisco(9).ciscoMgmt(9)
.ciscoCcmeMIB(439).<MIB-variable>

Position in the Internet Standard MIB Hierarchy

Figure 4 shows the position of the CISCO-CCME-MIB in the Internet Standard MIB hierarchy.

Figure 4 CISCO-CCME-MIB Tree Structure

Supported Cisco CME Features

The CISCO-CCME-MIB supports the following Cisco CME 3.4 features (listed alphabetically):

Call blocking

Call-forward, transfer, hold configurations, transfer methods

Cisco CME configuration display

Class of restriction (COR)

Ephone (Ethernet phone)

Ephone directory number (DN)

Extension overlays

Huntstop

Interactive-voice-response (IVR) application

Intercom

Message waiting indicator (MWI)

Music on hold (MOH)

Night service

SIP unsolicited MWI display

Speed dial, Fast-dial

System message display

Telephone Application Programming Interface (TAPI) support

User locale

Web browser configuration

How to Configure Cisco CME SNMP MIB Support

Enabling the SNMP Agent

Verifying Enabling of the SNMP Agent (optional)

Enabling Cisco CME Network-Management Notifications and Traps

Enabling the SNMP Agent

The SNMP agent for the CISCO-CCME-MIB is disabled by default. To enable the agent, perform the following steps.


Note Access your router directly using Telnet or using Terminal server. Telnets to the router are identified by the specified IP address (represented as xxx.xxx.xxx.xxx).


SUMMARY STEPS

1. enable

2. config terminal

3. snmp-server community xxxxxx RO

4. snmp-server community xxxxxx RW

5. exit

6. write memory

DETAILED STEPS

 
Command or Action
Purpose

Step 1 

enable

Example:

Router> enable

Enters privileged EXEC mode.

Step 2 

config terminal

Example:

Router# config terminal

Enters global configuration mode.

Step 3 

snmp-server community xxxxxx RO

Example:

Router(config)# snmp-server community xxxxxx RO

Enables the read-only (RO) community string, where xxxxxx represents the read-only community/password string.

Step 4 

snmp-server community xxxxxx RW

Example:

Router(config)# snmp-server community xxxxxx RW

Enables the read-write (RW) community string, where xxxxxx represents the read-write community/password string.

Step 5 

exit

Example:

Router(config)# exit

Exits the current mode.

Step 6 

write memory

Example:

Router# write memory

Writes the modified configuration to nonvolatile memory (NVRAM), permanently saving the settings.

Verifying Enabling of the SNMP Agent

To verify that the SNMP agent has been enabled on a given network device, perform the following steps.


Step 1 Telnet to the target device.

Step 2 Display the running configuration on the device and examine the output for any displayed SNMP information:

Router# show running-config

.
.
.
snmp-server community public RO
snmp-server community private RW

An "snmp-server" statement such as that above verifies that SNMP is enabled on the specified device.


Enabling Cisco CME Network-Management Notifications and Traps

To enable Cisco CME network management notifications and traps, perform the following steps.


Note Access your router directly using Telnet or using Terminal server. Telnets to the router identified by the specified IP address (represented as xxx.xxx.xxx.xxx).


SUMMARY STEPS

1. enable

2. config terminal

3. snmp-server enable traps ccme

4. exit

5. write memory

DETAILED STEPS

 
Command or Action
Purpose

Step 1 

enable

Example:

Router> enable

Enters privileged EXEC mode.

Step 2 

config terminal

Example:

Router# config terminal

Enters global configuration mode.

Step 3 

snmp-server enable traps ccme

Example:

Router(config)# snmp-server enable traps ccme

Enables the Cisco CME traps.

Step 4 

exit

Example:

Router(config)# exit

Exits the current mode.

Step 5 

write memory

Example:

Router# write memory

Writes the modified configuration to nonvolatile memory (NVRAM), permanently saving the settings.


Note For information on enabling Cisco CME, see the Cisco CME System Administration Guide.


Configuration Examples for Cisco CME SNMP MIB Support

The following partial configuration example for Cisco CME shows an example of the commands used to configure Cisco CME.

.
.
.
service timestamps debug datetime msec
service timestamps log uptime
!
logging buffered 2000000 debugging
!
!
ip dhcp pool ITS
   network 1.4.49.0 255.255.255.0
   option 150 ip 1.4.49.1
   default-router 1.4.49.1
!
!
no ip domain lookup
!
!
ip route 1.4.0.0 255.255.0.0 FastEthernet0/0
!
ip http server
ip http path flash:
!
snmp-server community public RW
snmp-server enable traps ccme
!
!
tftp-server flash:P00303020214.bin
tftp-server flash:P00305000301.sbn
tftp-server flash:P00403020214.bin
!
!
dial-peer cor custom
 name corlistname1
!
!
dial-peer cor list corlistname1
 member corlistname1
!
dial-peer cor list corname
 member corlistname1
!
!
telephony-service
 fxo hook-flash
 load 7910 P00403020214
 load 7960-7940 P00305000301
 max-ephones 10
 max-dn 50
 ip source-address 1.4.49.1 port 2000
 auto assign 1 to 50
 auto assign 1 to 2
 system message Your current options
 url directories http://mydomain.com/dir2/path/dir_file1.html
 url services http://mydomin.com/dir1/path/file1.html
 date-format dd-mm-yy
 create cnf-files version-stamp 7960 Jun 16 2002 07:06:48
 dialplan-pattern 1 9889 extension-length 4 extension-pattern 9897
 dialplan-pattern 2 8989 extension-length 5 extension-pattern 98978 no-reg
 dialplan-pattern 4 4345 extension-length 4
 voicemail 9999
 mwi sip-server 1.1.1.1 transport tcp
 mwi sip-server 1.2.4.78 unsolicited
 mwi relay
 mwi expires 90000
 max-conferences 4
 call-forward pattern 888..
 call-forward pattern 9998.
 moh flash:a.au
 multicast moh 239.10.16.4 port 2091 route 2.3.4.5 2.4.66.78 2.3.1.67 1.3.4.2
 web admin system name webadminsystemname1 password webadminsysuser1passwd
 web admin customer name webadmincustomername2 password webadminuser2passwd
 time-webedit
 transfer-system full-blind
 transfer-pattern 55501.. blind
 transfer-pattern 55502..
 transfer-pattern 55503..
 transfer-pattern 55504..
 secondary-dialtone 234
 login timeout 60 clear 23:12
 after-hours block pattern 1 7878 7-24
 after-hours block pattern 2 74093 7-24
 after-hours block pattern 3 45654
 after-hours day Sun 02:03 02:04
 after-hours day Wed 12:20 12:30
 after-hours date Feb 29 02:05 02:06
 after-hours date Jan 23 12:20 12:30
 night-service code *5566
 night-service day Mon 11:21 11:22
 night-service day Tue 21:21 12:22
 night-service date Jan 2 04:12 11:12
 night-service date Jul 3 02:10 11:11
!
!
ephone-dn  1  dual-line
 number 1
 call-forward busy 9999
 call-forward noan 9999 timeout 18
!
!
ephone-dn  2  dual-line
 number 2 secondary 3
 label userlabelB
 name User B
 call-forward busy 9999
 call-forward noan 9999 timeout 18
!
!
ephone-dn  3  dual-line
 number 2003
 cor incoming corlistname1
!
!
ephone-dn  4  dual-line
 number 2004
!
!
ephone-dn  5  dual-line
 number 2005
!
!
ephone-dn  6  dual-line
 number 690
!
!
ephone-dn  7
 number 77
 loopback-dn 14 prefix 3 suffix "#"
!
!
ephone-dn  8
 number 88
 loopback-dn 14 forward 4 prefix 9
!
!
ephone-dn  9
 number 99
 intercom 10 barge-in label "intercom901"
!
!
ephone-dn  10
 number 10
 intercom 99 barge-in label "intercom101"
!
!
ephone-dn  12
 number 12
!
!
ephone  1
 mac-address 000F.23E7.16F0
 fastdial 1 3645 name 1
 fastdial 2 37456 name secondname
 speed-dial 1 45654 label "humhumhum"
 speed-dial 2 987554 label "humhumhum2"
 type 7960
 button  1:3
!
!
ephone  2
 mac-address 000F.23E7.1BA0
 type 7960
 button  1:2
!
!
line con 0
 exec-timeout 0 0
line aux 0
line vty 0 4
!
ntp clock-period 17184626
ntp server 172.22.121.117
end

Cisco CME SNMP MIB Support Reference Tables

This section contains the following information:

Summary List of Objects

Summary List of Notifications and Traps

SNMP MIB Tables

CISCO-CCME-MIB Objects

Cisco CME MIB Object Groups

Correlation of Tables

Cisco CME Traps and Notifications

Summary List of Objects

Table 7 lists the objects provided in the Cisco CME MIB. Objects contained within a table are indented. Table 8 lists the notifications/traps provided in the Cisco CME MIB.

For a more detailed explanation of the object definitions, see Table 9.

Table 7 CISCO-CCME-MIB Summary List of Objects 

No.
Object Name
Comment
1

ccmeEnabled

Enabled status

2

ccmeVersion

Cisco CME version

3

ccmeIPAddressType

IP address type

4

ccmeIPAddress

Cisco CME IP address

5

ccmePortNumber

TCP port number

6

ccmeMaxEphones

Maximum number of ephones configured

7

ccmeMaxDirectoryNumber

Maximum number of directory numbers configured

8

ccmeMaxConferences

Maximum number of simultaneous 3-party calls allowed

9

ccmeMaxRedirect

Maximum number of times a call can be redirected

10

ccmeScriptName

Session-level IVR application script name

11

ccmeVoiceMailNumber

Number associated with a voice-mail

12

ccmeMwiRelay

Message-waiting indication notification relay supported

13

ccmeMwiExpires

Message-waiting indication notification expiration time

14

ccmeTransferSystem

Call transfer method for configured ephone extensions

15

ccmeTimeFormat

Time format configured

16

ccmeDateFormat

Date format configured

17

ccmeUrlforServicesBtn

URL for the Services button on the ephone display

18

ccmeUrlforDirectoriesBtn

URL for the Directories button on the ephone display

19

ccmeMohFlashFile

Name of the audio file to use for MOH

20

ccmeMohMulticastFromFlashEnabled

MOH multicast from flash file source status

21

ccmeMohFlashMulticastIPAddrType

Address type of ccmeMohFlashMulticastIPAddr

22

ccmeMohFlashMulticastIPAddr

Destination IP address for audio stream multicast

23

ccmeMohFlashMulticastPortNum

Media port for audio stream multicast

 
ccmePhoneFirmwareTable
24

ccmePhoneFirmwareIndex

Table index

25

ccmePhoneType

Ephone type or model

26

ccmePhoneFirmwareRev

Vendor-specific firmware revision string

 
ccmeTransferPatternTable
27

ccmeTransferPatternIndex

Table index

28

ccmeTransferPattern

Digits for permitted call transfers

29

ccmeTransferPatternType

Pattern for call transfer

30

ccmeWebGUIEditEnabled

Web-based GUI is allowed to add extensions

31

ccmeWebGUITimeEnabled

Web-based GUI is allowed to change device time

 
ccmeAfterHrsBlockPatternTable
32

ccmeAfterHrsBlockPatternTag

Identifier tag configured for the after-hours block pattern

33

ccmeAfterHrsBlockPattern

Outgoing call digits that are matched the after-hours block call

34

ccmeAfterHrsBlockPatternAllTime

After-hours block pattern is applicable all of the time

 
ccmeAfterHrsBlockDateTable
35

ccmeAfterHrsBlockDateIndex

Table index

36

ccmeAfterHrsBlockDateMonth

Month when after-hours block service is activated

37

ccmeAfterHrsBlockDate

Date when after-hours block service is active

38

ccmeAfterHrsBlockDateStartHour

Hour when after-hours block service is activated

39

ccmeAfterHrsBlockDateStartMin

Minute when after-hours block service is activated

40

ccmeAfterHrsBlockDateStopHour

Hour when after-hours block service is deactivated

41

ccmeAfterHrsBlockDateStopMin

Minute when after-hours block service is deactivated

 
ccmeAfterHrsBlockDayTable
42

ccmeAfterHrsBlockDayIndex

Table index

43

ccmeAfterHrsBlockDay

Day when after-hours block service is active

44

ccmeAfterHrsBlockDayStartHour

Hour when after-hours block service is activated

45

ccmeAfterHrsBlockDayStartMin

Minute when after-hours block service is activated

46

ccmeAfterHrsBlockDayStopHour

Hour when after-hours block service is deactivated

47

ccmeAfterHrsBlockDayStopMin

Minute when after-hours block service is deactivated

48

ccmeNightServiceCode

Night service code that disables/enables night service on ephones

 
ccmeNightServiceDateTable
49

ccmeNightServiceDateIndex

Table index

50

ccmeNightServiceDateMonth

Month when night service is activated

51

ccmeNightServiceDate

Day when night service is activated

52

ccmeNightServiceDateStartHour

Hour when night service is activated

53

ccmeNightServiceDateStartMin

Minute within the hour when night service is activated

54

ccmeNightServiceDateStopHour

Hour when night service is deactivated

55

ccmeNightServiceDateStopMin

Minute of the hour when night service is deactivated

 
ccmeNightServiceDayTable
56

ccmeNightServiceDayIndex

Table index

57

ccmeNightServiceDay

Day when night service is activated

58

ccmeNightServiceDayStartHour

Hour when night service is activated

59

ccmeNightServiceDayStartMin

Minute within the hour when night service is activated

60

ccmeNightServiceDayStopHour

Hour when night service is deactivated

61

ccmeNightServiceDayStopMin

Minute within the hour when night service is deactivated

62

ccmeFXOHookFlashEnabled

Flash softkey display is enabled on foreign exchange office lines

63

ccmeSecondaryDialTonePrefix

Secondary dial tone access prefix digit string

64

ccmeWebAdminSystemUser

Login username for a Cisco CME system administrator

65

ccmeWebAdminCustomerUser

Login username for a Cisco CME customer administrator

66

ccmeSystemMessage

Text system message displayed on idle ephone

 
ccmeDialplanPatternTable
67

ccmeDialplanPatternIndex

Table index

68

ccmeDialplanPatternTag

Number that identifies the dial-plan pattern

69

ccmeDialplanExtLength

Length of digit extension for dial-plan-pattern extension

70

ccmeDialplanPattern

String of digits forming a dial-plan pattern

71

ccmeDialplanExtPattern

String of digits forming the extension number leading digit pattern

72

ccmeDialplanAllowRegiEnabled

Whether or not the dial peer E.164 number can register with the gatekeeper

73

ccmeKeepAliveTimeout

Time between successive keepalive messages

74

ccmeInterDigitTimeout

Time interval for interdigit timeout for ephones

75

ccmeBusyTimeout

Wait time before a call is disconnected from a busy signal

76

ccmeAlertTimeout

Time interval for the ephone to alert when a call is unanswered

 
ccmeEphoneConfTable
77

ccmeEphoneTag

Number identifying a configured ephone on the device

78

ccmeEphoneIpAddressType

Address type of ccmeEphoneIpAddress

79

ccmeEphoneIpAddress

Designated IP address of the configured ephone

80

ccmeEphoneMacAddress

MAC address of the ephone

81

ccmeEphoneModel

Type and model of the ephone

82

ccmeEphoneUsername

Username of the local ephone user

83

ccmeEphoneKeepAlive

Time between successive keepalive messages

84

ccmeEphoneAutoLineOut

Line (ephone-dn) selected for outgoing calls

85

ccmeEphonePagingDn

Audio paging DN group configured for this ephone

86

ccmeEphoneAddon

Number of add on modules attached to this ephone

87

ccmeEphoneTemplate

Ephone template tag associated with this ephone

88

ccmeEphonePagingPolicy

Paging mechanism associated with this ephone

89

ccmeEphoneKeyPhone

Whether or not the ephone is marked as key ephone

90

ccmeEphoneAutoLineInEnabled

Automatic line (ephone-dn) selection for incoming call is available

91

ccmeEphoneAftHrsBlkExmptEnabled

Whether or not the ephone is exempt from after-hours blocking

92

ccmeEphoneNightBellSvcEnabled

Whether or not night-bell service is available on this ephone

93

ccmeEphoneKeepConfEnabled

Call disconnect status when the conference initiator hangs-up

 
ccmeEphoneSpeedDialConfTable
94

ccmeEphoneSpeedDialTableIndex

Table index

95

ccmeEphoneSpeedDialTag

Identifier tag configured for a speed-dial entry

96

ccmeEphoneSpeedDialNumber

Speed-dial E.164 ephone extension number associated with a line

97

ccmeEphoneSpeedDialLabel

Speed-dial label

 
ccmeEphoneFastDialConfTable
98

ccmeEphoneFastDialTableIndex

Table index

99

ccmeEphoneFastDialNumber

Fast- dial E.164 ephone extension number associated with the ephone

100

ccmeEphoneFastDialName

Name associated with this fast-dial E.164 ephone extension number

 
ccmeEphoneBtnDNAssocConfTable
101

ccmeEphoneButtonNumber

Button number of an ephone

102

ccmeEphoneOverlayDN

Overlay DNs configured for this button on this ephone

 
ccmeEphoneDnConfigTable
103

ccmeEphoneDnTag

Whether or not an ephone extension is configured on this device

104

ccmeEphoneDnType

Extension type of the line

105

ccmeEphoneDnMode

Line mode

106

ccmeEphoneDnPriNum

Primary E.164 ephone extension number associated with a line

107

ccmeEphoneDnSecNum

Secondary E.164 ephone extension number associated with a line

108

ccmeEphoneDnName

Person's name associated with this extension (ephone-dn)

109

ccmeEphoneDnLabel

Text string displayed on the ephone console, not the extension number

110

ccmeEphoneDnPriPref

Preference for the primary number associated with an extension

111

ccmeEphoneDnSecPref

Preference for the secondary number associated with an extension

112

ccmeEphoneDnCFBusyNum

Call forward busy number

113

ccmeEphoneDnCFAllNum

Number to which incoming calls are forwarded

114

ccmeEphoneDnCFNoAnNum

Number to which incoming calls are forwarded that does not answer

115

ccmeEphoneDnCFNoAnTo

Duration an unanswered call rings before forwarding

116

ccmeEphoneDnMwiCapability

Extension capability to process MWI notification

117

ccmeEphoneDnHuntstop

Call hunting behavior for an unanswered line stops if not answered

118

ccmeEphoneDnHuntstopCh

Call hunting behavior for an unanswered dual line stops if not answered

119

ccmeEphoneDnHoldAltTo

Time out for repeating audible alert notification when a call is on hold

120

ccmeEphoneDnHoldAltType

When hold alert audible notification is repeated

121

ccmeEphoneDnMwiSipSubscrEnabled

Whether or not the extension is subscribed to a SIP-based MWI server

122

ccmeEphoneDnScriptName

IVR application script name for this extension

123

ccmeNotificationEnable

Whether or not the system produces the Cisco CME notifications

124

ccmeSysTrapSeverity

Alarm condition severity of the most recent notification

125

ccmeSysNotificationReason

Failure cause of the alarm condition, for the most recent trap

126

ccmeEphoneUnRegThreshold

Sets the threshold to limit the unregistration trap notification

127

ccmeEphoneTrapReason

Failure cause of the alarm condition, for the most recent ephone trap

128

ccmeUserAutoLogoutTo

Time before Cisco CME ephone users are automatically logged out

129

ccmeUserLoginDeactivateTime

Time of day when user logins for all ephones are deactivated

130

ccmeMwiSipServerIpAddress

IP address to an external SIP-based MWI server

131

ccmeMwiSipServerTransportType

Protocol used to connect to an external SIP-based MWI server

132

ccmeMwiSipServerPortNumber

Port number for the MWI server

133

ccmeMwiSipServerRegE164Enabled

Whether or not the E.164 number is registered with SIP proxy or registrar

134

ccmeMwiSipSvrUnsolicitedEnabled

Whether or not a SIP NOTIFY for MWI is sent without a SUBSCRIBE

 
ccmeCorConfTable
135

ccmeCorTableIndex

Table index

136

ccmeCorTag

Class of restriction (COR) tag number

137

ccmeCorListName

COR list name configured on this device

138

ccmeCorScope

Scope of this COR list for a list of associated dial-peers

139

ccmeCorDirection

Whether the COR is used by incoming or outgoing dial peers

140

ccmeCorStartingNumber

Starting number of a range of directory numbers for a COR list

141

ccmeCorEndingNumber

Ending number of a range of directory numbers for a COR list

142

ccmeCorVoiceRegPoolNumber

Voice registrar pool number under which this COR list is applied

143

ccmeCorListDefaultEnabled

Whether the default COR list is enabled or disabled for this COR entry

 
ccmeLoopbackDnConfTable
144

ccmeLoopbackDnTag

Number identifying the ephone-dn loopback pairs in this device

145

ccmeLoopbackDnforward

Number of digits in the original called number that are forwarded

146

ccmeLoopbackDnStrip

Digits stripped from the original called number that are forwarded

147

ccmeLoopbackDnPrefix

String of digits added to the front of the forwarded called number

148

ccmeLoopbackDnSuffix

String of digits added to the end of the forwarded called number

149

ccmeLoopbackDnRetryTo

Seconds to wait before retrying loopback target when busy or unavailable

150

ccmeLoopbackDnAutoCon

Automatic connection capability for the call during far-end alert

151

ccmeLoopbackDnCodec

Codec type applied to the calls that pass through the loopback-DN

 
ccmeIntercomDnConfTable
152

ccmeIntercomDnTag

Tag number under which the intercom was configured

153

ccmeIntercomDnExtensionNum

Telephone number to which an intercom call is placed

154

ccmeIntercomDnBargeInEnabled

Inbound intercom call behavior when an existing call is active

155

ccmeIntercomDnAutoAnsEnabled

Whether or not the auto-answer feature is applied to this ephone-dn

156

ccmeIntercomDnLabel

Label for the intercom configured on this device

157

ccmeMohMulticastIpAddressType

Address type of ccmeMohMulticastIpAddress

158

ccmeMohMulticastIpAddress

Destination IP address for multicast of the MOH audio stream

159

ccmeMohMulticastPortNumber

Media port for multicast of the Moh audio stream

160

ccmeMohMulticastRoute

Space-separated IP addresses to which Moh multicast packets are transmitted

161

ccmeEphoneCallLegs

Call legs from the ephones and TAPI clients interacting with this device

162

ccmeEphoneTot

Number of ephones seen by this device since reset

163

ccmeEphoneTotRegistered

Number of ephones currently registered to this device

164

ccmeEphoneTotKeyPhConfigured

Number of configured ephones marked as key ephones on this device

165

ccmeEphoneTotKeyPhRegistered

Number of key ephones currently registered to this device

 
ccmeEphoneActTable
166

ccmeEphoneDeviceName

Type and model of ephone as seen in the registration on this device

167

ccmeEphoneRegState

Registration state of the ephone

168

ccmeEphoneActiveDN

Current active DN (line) on the ephone

169

ccmeEphoneActivityStatus

Current status of the ephone as seen on this device

170

ccmeEphoneKeepAliveCnt

Number of keepalive messages received since the ephone registered

171

ccmeEphonePendingReset

Pending reset operation on this ephone as seen by this device

172

ccmeEphoneRegTime

Time this ephone registered to this device

173

ccmeEphoneCurrentFirmwareRev

Vendor-specific firmware version string provided by the ephone

174

ccmeEphonePreviousFirmwareRev

Previous vendor-specific firmware version of ephone

175

ccmeEphoneLastError

Reason for last reset of the ephone as seen by this device

176

ccmeEphoneObservedType

Type and model of ephone device received during registration

177

ccmeEphoneLoginStatus

Phone-user login status on this ephone

178

ccmeEphoneDnDStatus

Phone is set to do-not-disturb (DnD) on one or more extensions

179

ccmeEphoneDebugStatus

Whether or not the ephone is set in debug mode

180

ccmeEphoneMediaActive

Whether or not the ephone is in active conversation

181

ccmeEphoneTAPIClient

Whether or not the ephone is a TAPI client

182

ccmeEphoneMediaCapability

Whether or not the registered ephone is capable of supporting audio or video

183

ccmeEphoneRemote

Phone is suspected not to be on the LAN

184

ccmeMohSource

MOH source

185

ccmeNightServiceEnabled

Current night service state

 
ccmeEphoneDnChStatsHistoryTable
186

ccmeEphoneDnChNum

Ephone-dn (line) channel number for this entry

187

ccmeEphoneDnChIncoming

Total incoming calls received by this ephone-dn (line) channel

188

ccmeEphoneDnChInAnswered

Total incoming calls answered by this ephone-dn (line) channel

189

ccmeEphoneDnChOutbound

Total calls placed by this ephone-dn (line) channel

190

ccmeEphoneDnChOutAnswered

Total calls placed and answered by this ephone-dn (line) channel

191

ccmeEphoneDnChOutBusy

Total calls placed from this channel and not answered

192

ccmeEphoneDnChDiscAtConn

Total calls placed from this channel and disconnected during call setup

193

ccmeEphoneDnChDiscAtAlert

Total calls placed from this channel and disconnected during call alerting

194

ccmeEphoneDnChDiscAtHold

Total calls placed from this channel and disconnected during call on hold

195

ccmeEphoneDnChDiscAtRing

Total calls received on this channel and disconnected during alerting

196

ccmeEphoneDnChDiscCauseNearEnd

Last near-end disconnect cause code seen by this channel

197

ccmeEphoneDnChDiscCauseFarEnd

Last far-end disconnect cause code seen by this channel

198

ccmeStatusChangeNotif

Notification generated if there is a change in ccmeEnabled

199

ccmeEphoneUnRegThresholdExceed

Notification generated when number of ephones registered is exceeded

200

ccmeEPhoneDeceased

Notification generated when registered ephone changes state to deceased

201

ccmeEPhoneRegFailed

Notification generated when an ephone attempts to register but fails

202

ccmeEphoneLoginFailed

Notification generated when an ephone user login is rejected/failed

203

ccmeNightServiceChangeNotif

Notification generated if night service status on this device changes

204

ccmeLivefeedMohFailedNotif

Notification generated when the MOH live feed fails

205

ccmeMaxConferenceNotif

Notification generated if the maximum number of simultaneous three-party conferences supported is exceeded

206

ccmeKeyEphoneRegChangeNotif

Notification generated if the key ephone registration status changes


Summary List of Notifications and Traps

Table 8 CISCO-CCME-MIB Summary List of Notifications and Traps

No.
Object Name
Comment
198

ccmeStatusChangeNotif

Notification generated if there is a change in ccmeEnabled

199

ccmeEphoneUnRegThresholdExceed

Notification generated when number of ephones registered is exceeded

200

ccmeEPhoneDeceased

Notification generated when registered ephone changes state to deceased

201

ccmeEPhoneRegFailed

Notification generated when an ephone attempts to register but fails

202

ccmeEphoneLoginFailed

Notification generated when an ephone user login is rejected/failed

203

ccmeNightServiceChangeNotif

Notification generated if night service status on this device changes

204

ccmeLivefeedMohFailedNotif

Notification generated when the MOH live feed fails

205

ccmeMaxConferenceNotif

Notification generated if the maximum number of simultaneous three-party conferences supported is exceeded

206

ccmeKeyEphoneRegChangeNotif

Notification generated if the key ephone registration status changes


SNMP MIB Tables

Tables are a powerful and often confusing aspect of SNMP MIBs. Architectural purists say that SNMP has conceptual tables, not real tables. This is because every object, whether in a table or not, is a leaf of the tree, identified by an object identifier (OID) that includes an instance. So, in an abstract sense, all objects are alike. But practically speaking, SNMP has tables, and using or implementing them gets somewhat more complex than implementing scalars, which are single object instances.

Tables have a rigid structure, defined in the SMI. Tables can contain only simple objects, not other tables, although multiple indexes can represent the concept of tables in tables. An entry, or row, in a table is uniquely identified by one or more table indexes, also called auxiliary objects. The OID of an object from a table is the OID for that object's position in the MIB tree concatenated with a representation of all the table indexes for an entry in the table.

For example, the Interface MIB (RFC 1573) has a key table called the ifTable. Its index object is ifIndex, an integer. Minus the instance, the OID for a counter from that table is:

iso.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifInOctets

Or, numerically:

1.3.6.1.2.1.2.2.1.10

For the interface with ifIndex 7, the full OID is:

iso.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifInOctets.7
1.3.6.1.2.1.2.2.1.10.7

Observe that row selection (instance) comes after column selection. This can be particularly confusing when you are applying the principle of lexical order to a table. Using the GetNext protocol operation to walk a table, you can proceed by column—that is, all instances for a column are returned before starting the next column.

Table indexes can be much more complex than tables. Here is an example from the Cisco VINES MIB. The INDEX clause from the ASN.1 definition is:

INDEX { cvForwNeighborHost,
            ifIndex,
            cvForwNeighborPhysAddress }

The first two indexes are simple integers, with ifIndex being imported from the standard ifTable. The final index is a variable-length octet string. Including the integers is simple and obvious. The variable-length index object gets more complex. RFC 1212 includes rules for encoding variable-length index objects as instances. The general rule is that the value is preceded by a length, and the length and each part of the value are separate subidentifiers.

So, for example, if we have neighbor host number 9, ifIndex 3, and an Ethernet neighbor physical address 0000.0c03.1ef0, the instance portion of an object for that row is 9.3.6.0.0.12.3.30.240.

In RFC 1902, SNMPv2 extends the instance-encoding rules to include an "IMPLIED" keyword that can be used on the final instance object if it is variable in length. When "IMPLIED" is present, the string instance cannot have a zero length in front of it.

Because lexical ordering for variable-length instance objects effectively sorts them by length, your ASCII text index does not come out naturally in alphabetical order.

CISCO-CCME-MIB Objects

This section contains the Cisco CallManager Express MIB object. Table 9 lists the CISCO-CCME-MIB groupings and objects. Table 10 lists the CISCO-CCME-MIB object IDs (OIDs).

Table 9 CISCO-CCME-MIB Groupings and Objects 

Group
Object
Max Access
Description
 

CISCO-CCME-MIB DEFINITIONS

This MIB allows management of Cisco CME features in Cisco IOS Release 12.4(x)T. Cisco CME is an optional software feature that enables Cisco routers to deliver key system or hybrid PBX functionality for enterprise branch offices or small businesses.

 

-- CCME MIB Groups

The CISCO-CCME-MIB groups are as follows:

ciscoCcmeMIBNotifs

ciscoCcmeMIBObjects

ciscoCcmeMIBConform

 

-- CCME MIB object groups

The CISCO-CCME-MIB object groups are as follows:

ccmeConfig

ccmeActiveStats

ccmeHistoryStats

ccmeConfigGroup
 

ccmeEnabled

Read-only

Whether Cisco CME is enabled on the device:

True—Enabled.

False—Disabled.

 

ccmeVersion

Read-only

Version of Cisco CallManager Express on the device.

 

ccmeIPAddressType

Read-only

Address type of ccmeIPAddress. Only IPv4 addresses are currently allowed.

 

ccmeIPAddress

Read-only

IP address through which the ephones communicate with Cisco CME. The type of this address is determined by the value of the ccmeSysIPAddressType object. This IP address is usually the IP address bound to the Ethernet port on the gateway to which the ephones are connected.

 

ccmePortNumber

Read-only

TCP port number to use for Skinny Client Control Protocol (SCCP). This also indicates through which port ephones communicate with this device.

DEFVAL: 2000

 

ccmeMaxEphones

Read-only

Maximum number of ephones allowed by the configuration for Cisco CME the device. Maximum permissible range is Cisco IOS release and platform dependent. A value of 0 indicates no ephones are permitted to register to this device.

 

ccmeMaxDirectoryNumber

Read-only

Maximum number of ephone extensions (ephone-dns) or directory numbers supported by this device. Maximum permissible range is Cisco IOS release and platform dependent. A value of 0 indicates no ephone extensions can be created.

 

ccmeMaxConferences

Read-only

Maximum number of simultaneous three-party conferences supported by the Cisco CME on the device.

Range is release and platform dependent. With Cisco CME 3.4, the following are the maximum values for each platform:

Cisco 1750, Cisco 1751, Cisco 2600, Cisco 3640: 8 conferences

Cisco 3660, Cisco 3725, Cisco 3745: 16 conferences

Default is half the maximum number of simultaneous three-party conferences for each platform.

A value of zero indicates that no three-party conferences are allowed on this device.

 

ccmeMaxRedirect

Read-only

Maximum number of times that a call can be redirected by call forwarding or transfer within this device.

 

ccmeScriptName

Read-only

Session-level IVR application script in Tool Command Language (Tcl) for all extensions (ephone-dns) in the Cisco CME system. By default no application script is selected for any extensions, and the object length in this case returns a zero length string.

 

ccmeVoiceMailNumber

Read-only

E.164 phone number that is associated with a voice-mail (speed-dial) on this device. If a voice-mail number is not configured, this object has a length of zero.

 

ccmeMwiRelay

Read-only

Whether or not the device can relay message-waiting indication (MWI) notification to remote ephones.

 

ccmeMwiExpires

Read-only

Expiration time, in seconds, for the registration of the MWI client or server.

DEFVAL: 86400.

 

ccmeTransferSystem

Read-only

Call-transfer method for all configured ephone extensions that use the ITU-T H.450.2 standard. Call transfers that use the H.450.2 standard can be blind or consultative.

A blind transfer is one in which the transferring extension connects the caller to a destination extension before ringback begins.

A consultative transfer is one in which the transferring party either connects the caller to a ringing phone (ringback heard) or speaks with the third party before connecting the caller to the third party.

blind—Calls are transferred without consultation using a single phone line and the Cisco proprietary method.

localConsult—Calls are transferred with local consultation using the second phone line if available, or the calls fall back to blind for nonlocal consultation or transfer target. This mode is intended for use primarily in voice over Frame Relay networks.|}

fullBlind—Calls are transferred without consultation using H.450.2 standard method.

fullConsult—Calls are transferred using H.450.2 with consultation using the second phone line if available, or the calls fall back to fullBlind if the second line is unavailable.

blind(1)

localConsult(2)

fullBlind(3)

fullConsult(4)

 

ccmeTimeFormat

Read-only

Time-display format on ephones in a Cisco CME system:

twelve(1)—12 hour clock

twentyfour(2)—24 hour clock

 

ccmeDateFormat

Read-only

Date-display format on ephones in a Cisco CME system:

1—mmddyy (default)

2—ddmmyy

3—yymmdd

4—yyddmm

 

ccmeUrlforServicesBtn

Read-only

URL information for the Services button on the ephone display. Cisco IP Phone 7940 and Cisco IP Phone 7960 can support four URLs in association with the four programmable feature buttons on those ephones: Directories, Information, Messages, and Services. The fifth button, Settings, is managed entirely by the ephone. Operation of these services is determined by the ephone capabilities and the content of the referenced URL.

 

ccmeUrlforDirectoriesBtn

Read-only

URL information for the Directories button on the ephone display. Cisco IP Phone 7940 and Cisco IP Phone 7960 can support four URLs in association with the four programmable feature buttons on those ephones: Directories, Information, Messages, and Services. The fifth button, Settings, is managed entirely by the ephone. Operation of these services is determined by the ephone capabilities and the content of the referenced URL.

 

ccmeMohFlashFile

Read-only

Name of the audio file to use for the MOH audio stream. Audio files that are used for MOH exist in the flash file system on the device. A MOH file can be in the .au or .wav file format. However, the file format must contain 8-bit, 8-kHz data in a-law or mu-law. Maximum length of filename is 128 characters. This object returns a zero-length string if the MOH from flash is not configured on this router.

 

ccmeMohMulticastFromFlashEnabled

Read-only

Whether or not MOH multicast from flash file source is enabled on this router. If ccmeMohFlashFile is zero length, this object has no relevance.

 

ccmeMohFlashMulticastIPAddrType

Read-only

Address type of ccmeMohFlashMulticastIPAddr. Only IPv4 and IPv6 addresses are allowed.

 

ccmeMohFlashMulticastIPAddr

Read-only

Destination IP address for multicast of the audio stream from flash file, that is designated for MOH. If ccmeMohFlashFile is zero length, this object has no relevance.

Cisco ephones do not support multicast at 224.x.x.x addresses.

 

ccmeMohFlashMulticastPortNum

Read-only

Media port for multicast of the audio stream from flash file that is designated for MOH. This object has no relevance if the ccmeMohMulticastFromFlash object is zero length.

 

ccmePhoneFirmwareTable

Not-accessible

List of firmware loads configured for each ephone on this device.

 

ccmePhoneFirmwareEntry

Not-accessible

Information on an ephone type and its configured firmware load. There is an entry in this table for each phone-type firmware that is configured on this device, which includes the following objects:

ccmePhoneFirmwareIndex

ccmePhoneType

ccmePhoneFirmwareRev

 

ccmePhoneFirmwareIndex

Not-accessible

Arbitrary and unique index for this CcmePhoneFirmwareEntry.

 

ccmePhoneType

Read-only

Type or model of ephone. Cisco ephone types are 7902, 7905, 7910, 7912, 7914, 7920, 7935, 7936, 7940, 7960, ATA-186, and ATA-188.

 

ccmePhoneFirmwareRev

Read-only

Vendor-specific firmware revision string configured for the ephone on this device.

 

ccmeTransferPatternTable

Not-accessible

List of transfer patterns configured on this device.

 

ccmeTransferPatternEntry

Not-accessible

Information on a configured transfer pattern. There is an entry in this table for each transfer pattern that is configured on this device, which includes the following objects:

ccmeTransferPatternIndex

ccmeTransferPattern

ccmeTransferPatternType

 

ccmeTransferPatternIndex

Not-accessible

An arbitrary and unique index for this CcmeTransferPatternEntry.

 

ccmeTransferPattern

Read-only

String of digits for permitted call transfers.

 

ccmeTransferPatternType

Read-only

Pattern for call transfer:

blind(1)—Blind transfer pattern

h4502(2)—H.450.2 consultative call transfer

 

ccmeWebGUIEditEnabled

Read-only

Cisco CME web-based graphical user interface (GUI) is allowed to add extensions (ephone-dns).

 

ccmeWebGUITimeEnabled

Read-only

Cisco CME web-based GUI is allowed to change or set time on this device.

 

ccmeAfterHrsBlockPatternTable

Not-accessible

List of after-hours block patterns configured on this device.

 

ccmeAfterHrsBlockPatternEntry

Not-accessible

Information about a configured after-hours block pattern. There is an entry in this table for each after-hours block that is configured on this device, which includes the following objects:

ccmeAfterHrsBlockPatternTag

ccmeAfterHrsBlockPattern

ccmeAfterHrsBlockPatternAllTime

 

ccmeAfterHrsBlockPatternTag

Not-accessible

Unique identifier tag configured for a pattern.

 

ccmeAfterHrsBlockPattern

Read-only

Configured string of outgoing call digits that is to be matched for blocking calls at specified after hours.

 

ccmeAfterHrsBlockPatternAllTime

Read-only

Whether or not after-hours block pattern is applicable all of the time:

true—The ccmeAfterHrsBlockPattern pattern is always applied, 7 days a week, 24 hours a day.

false—The ccmeAfterHrsBlockPattern pattern is blocked during the days and dates defined by the ccmeAfterHrsBlockDateTable and ccmeAfterHrsBlockDayTable objects.

 

ccmeAfterHrsBlockDateTable

Not-accessible

List of recurring time periods, based on date, during which outgoing calls that match defined block patterns are blocked on ephones.

 

ccmeAfterHrsBlockDateEntry

Not-accessible

Information on a configured after-hours block pattern date. There is an entry in this table for each entry that is configured on this device. An entry is deleted from this table once an after-hours block configuration is removed from this device, which includes the following objects:

ccmeAfterHrsBlockDateIndex

CcmeAfterHrsBlockDateEntry

ccmeAfterHrsBlockDateMonth

ccmeAfterHrsBlockDate

ccmeAfterHrsBlockDateStartHour

ccmeAfterHrsBlockDateStartMin

ccmeAfterHrsBlockDateStopHour

ccmeAfterHrsBlockDateStopMin

 

ccmeAfterHrsBlockDateIndex

Not-accessible

An arbitrary and unique index for this CcmeAfterHrsBlockDateEntry.

 

ccmeAfterHrsBlockDateMonth

Read-only

Month of the year during which after-hours block service is activated:

jan(1)

feb(2)

mar(3)

apr(4)

may(5)

jun(6)

jul(7)

aug(8)

sep(9)

oct(10)

nov(11)

dec(12)

 

ccmeAfterHrsBlockDate

Read-only

Day of the month during which after-hours block service is activated.

 

ccmeAfterHrsBlockDateStartHour

Read-only

Hour of the day during which after-hours block service is activated.

 

ccmeAfterHrsBlockDateStartMin

Read-only

Minute in the ccmeAfterHrsBlockDateStartHour from which after-hours block service is activated.

 

ccmeAfterHrsBlockDateStopHour

Read-only

Hour of the day during which after-hours block service is deactivated.

 

ccmeAfterHrsBlockDateStopMin

Read-only

Minute in the ccmeAfterHrsBlockDateStopHour after which after-hours block service is deactivated.

 

ccmeAfterHrsBlockDayTable

Not-accessible

List of recurring time periods, based on day of week, during which outgoing calls that match defined block patterns are blocked on ephones.

 

ccmeAfterHrsBlockDayEntry

Not-accessible

Information on a configured after-hours block-pattern day. There is an entry in this table for each entry that is configured on this device. An entry is deleted from this table once an after-hours block day configuration is removed from this device, which includes the following objects:

ccmeAfterHrsBlockDayIndex

ccmeAfterHrsBlockDay

ccmeAfterHrsBlockDayStartHour

ccmeAfterHrsBlockDayStartMin

ccmeAfterHrsBlockDayStopHour

ccmeAfterHrsBlockDayStopMin

 

ccmeAfterHrsBlockDayIndex

Not-accessible

An arbitrary and unique index for this CcmeAfterHrsBlockDayEntry.

 

ccmeAfterHrsBlockDay

Read-only

Day of the week during which after-hours block service is activated:

sun(1)

mon(2)

tue(3)

wed(4)

thu(5)

fri(6)

sat(7)

 

ccmeAfterHrsBlockDayStartHour

Read-only

Hour of the day during which after-hours block service is activated.

 

ccmeAfterHrsBlockDayStartMin

Read-only

Minute in the ccmeAfterHrsBlockDayStartHour from which after-hours block service is activated.

 

ccmeAfterHrsBlockDayStopHour

Read-only

Hour of the day during which after-hours block service is inactive.

 

ccmeAfterHrsBlockDayStopMin

Read-only

Minute in the ccmeAfterHrsBlockDayStopHour after which after-hours block service is inactive.

 

ccmeNightServiceCode

Read-only

Configured night-service code that a user enters at an ephone to disable or enable night service. The code begins with an asterisk (*).

 

ccmeNightServiceDateTable

Not-accessible

List of recurring time periods, based on date of month, during which night service is activated.

 

ccmeNightServiceDateEntry

Not-accessible

Information on a configured night service date pattern. There is an entry in this table for each entry that is configured on this device. An entry is deleted from this table once a night-service configuration is removed from this device, which includes the following objects:

ccmeNightServiceDateIndex

ccmeNightServiceDateMonth

ccmeNightServiceDate

ccmeNightServiceDateStartHour

ccmeNightServiceDateStartMin

ccmeNightServiceDateStopHour

ccmeNightServiceDateStopMin

 

ccmeNightServiceDateIndex

Not-accessible

Arbitrary and unique index for this CcmeNightServiceDateEntry.

 

ccmeNightServiceDateMonth

Read-only

Month of the year during which night service is activated:

jan(1)

feb(2)

mar(3)

apr(4)

may(5)

jun(6)

jul(7)

aug(8)

sep(9)

oct(10)

nov(11)

dec(12)

 

ccmeNightServiceDate

Read-only

Day of the month during which night service is activated.

 

ccmeNightServiceDateStartHour

Read-only

Hour of the day during which night service is activated.

 

ccmeNightServiceDateStartMin

Read-only

Minute in the ccmeNightServiceDateStartHour during which night service is activated.

 

ccmeNightServiceDateStopHour

Read-only

Hour of the date during which night service is deactivated.

 

ccmeNightServiceDateStopMin

Read-only

Minute in the ccmeNightServiceDateStopHour during which night service is deactivated.

 

ccmeNightServiceDayTable

Not-accessible

List of recurring time periods associated with a day of the week during which night service is activated.

 

ccmeNightServiceDayEntry

Not-accessible

Information on a configured night service day pattern. There is an entry in this table for each entry that is configured on this device. An entry is deleted from this table once a night service configuration is removed from this device, which includes the following objects:

ccmeNightServiceDayIndex

ccmeNightServiceDay

ccmeNightServiceDayStartHour

ccmeNightServiceDayStartMin

ccmeNightServiceDayStopHour

ccmeNightServiceDayStopMin

 

ccmeNightServiceDayIndex

Not-accessible

An arbitrary and unique index for this CcmeNightServiceDayEntry.

 

ccmeNightServiceDay

Read-only

Day of the week during which night service is activated:

sun(1)

mon(2)

tue(3)

wed(4)

thu(5)

fri(6)

sat(7)

 

ccmeNightServiceDayStartHour

Read-only

Hour of the day during which night service is activated.

 

ccmeNightServiceDayStartMin

Read-only

Minute in the ccmeNightServiceDayStartHour during which night service is activated.

 

ccmeNightServiceDayStopHour

Read-only

Hour of the day during which night service is deactivated.

 

ccmeNightServiceDayStopMin

Read-only

Minute in the ccmeNightServiceDayStopHour during which night service is deactivated.

 

ccmeFXOHookFlashEnabled

Read-only

Whether or not the flash softkey display on the ephone is enabled:

true—Display is enabled.

false—Display is not enabled.

Note The flash softkey is provided to Cisco IP Phone 7940 and Cisco IP Phone 7960 users on foreign-exchange-office (FXO) lines attached to the Cisco CME system.

 

ccmeSecondaryDialTonePrefix

Read-only

Secondary dial tone access prefix digit string. If secondary dial tone is not configured on this device, the object returns a zero length string. For example, 9.

 

ccmeWebAdminSystemUser

Read-only

Login username for a Cisco CME system administrator.

 

ccmeWebAdminCustomerUser

Read-only

Login username for a Cisco CME customer administrator.

 

ccmeSystemMessage

Read-only

Configured text system message for display on idle Cisco IP Phone 7940 and Cisco IP Phone 7960 phones in a Cisco CME system. The text message is an alphanumeric string of up to 32 characters that displays when the phone is idle.

 

ccmeDialplanPatternTable

Not-accessible

List of dial-plan patterns configured on this device.

 

ccmeDialplanPatternEntry

Not-accessible

Information on a configured dial-plan pattern. There is an entry in this table for each pattern that is configured on this device, which includes the following objects:

ccmeDialplanPatternIndex

ccmeDialplanPatternTag

ccmeDialplanExtLength

ccmeDialplanPattern

ccmeDialplanExtPattern

ccmeDialplanAllowRegiEnabled

 

ccmeDialplanPatternIndex

Not-accessible

An arbitrary and unique index for this ccmeDialplanPatternTable.

 

ccmeDialplanPatternTag

Read-only

Number that identifies the dial-plan pattern.

 

ccmeDialplanExtLength

Read-only

Length of digit extension for dial-plan-pattern extension.

 

ccmeDialplanPattern

Read-only

String of digits forming a dial-plan pattern, such as the area code, prefix, and first one or two digits of the extension number, plus wild-card markers or dots (.) for the remainder of the extension number digits.

Example: 40854.....

 

ccmeDialplanExtPattern

Read-only

String of digits forming the extension number leading digit pattern that is used when the leading digits of the extension number are different from the E.164 telephone number leading digits defined by the ccmeDialplanPattern object.

 

ccmeDialplanAllowRegiEnabled

Read-only

Whether or not the E.164 number in the dial peer is allowed to register with the gatekeeper:

true—Registration is allowed.

false—Registration is disabled.

 

ccmeKeepAliveTimeout

Read-only

Length of time, in seconds, between successive keep-alive messages from this device to ephones.

DEFVAL: 30

 

ccmeInterDigitTimeout

Read-only

Length of time, in seconds, for interdigit timeout for ephones.

DEFVAL: 10

 

ccmeBusyTimeout

Read-only

Length of time, in seconds, after which the call is disconnected from a busy signal.

DEFVAL: 10

 

ccmeAlertTimeout

Read-only

Length of time, in seconds, that Cisco CME allows the ephone to alert (ring) if a call is not answered.

DEFVAL: 180

 

ccmeEphoneConfTable

Not-accessible

List of ephones configured on this device.

 

ccmeEphoneConfEntry

Not-accessible

Information about a configured ephone. There is an entry in this table for each ephone that is configured on this device. An entry is deleted in this table once an ephone configuration is removed from this device, which includes the following objects:

ccmeEphoneTag

ccmeEphoneIpAddressType

ccmeEphoneIpAddress

ccmeEphoneMacAddress

ccmeEphoneModel

ccmeEphoneUsername

ccmeEphoneKeepAlive

ccmeEphoneAutoLineOut

ccmeEphonePagingDn

ccmeEphoneAddon

ccmeEphoneTemplate

ccmeEphonePagingPolicy

ccmeEphoneKeyPhone

ccmeEphoneAutoLineInEnabled

ccmeEphoneAftHrsBlkExmptEnabled

ccmeEphoneNightBellSvcEnabled

ccmeEphoneKeepConfEnabled

 

ccmeEphoneTag

Not-accessible

Number that uniquely identifies an ephone configured on the device. The maximum number of ephone entries varies among Cisco IOS platforms and can be less than 120.

 

ccmeEphoneIpAddressType

Read-only

Address type of ccmeEphoneIpAddress. Only IPv4 addresses are currently allowed.

 

ccmeEphoneIpAddress

Read-only

Designated IP address of this ephone configured on this device.

 

ccmeEphoneMacAddress

Read-only

MAC address of the ephone.

 

ccmeEphoneModel

Read-only

Type and model of the ephone.

 

ccmeEphoneUsername

Read-only

Username of the local ephone user. Default is "Admin". The specified login account allows an ephone user to access a web-based GUI to view information and change some personal settings for the ephone user's own ephone only. A login account is also required for users of TAPI-aware PC applications, which can register with this device and exercise remote-control operations of ephones.

 

ccmeEphoneKeepAlive

Read-only

Time interval, in seconds, between successive keep-alive messages from this device to this particular ephone. If the router fails to receive three successive keepalive messages, it considers the ephone to be out of service until the ephone reregisters.

DEFVAL: 30

 

ccmeEphoneAutoLineOut

Read-only

Line (ephone-dn) to be selected for outgoing calls when this ephone goes off-hook.

 

ccmeEphonePagingDn

Read-only

Audio-paging DN group configured for this ephone.

 

ccmeEphoneAddon

Read-only

Number of add-on modules (Cisco IP Phone 7914 types) that are attached to this ephone.

 

ccmeEphoneTemplate

Read-only

Ephone template tag associated with this ephone.

 

ccmeEphonePagingPolicy

Read-only

Paging mechanism associated with this ephone:

unicast(1)—Phone is not capable of receiving audio paging through multicast and requests that all pages to this ephone be sent through unicast.

multicast(2)—Audio paging is transmitted to the ephone through multicast.

 

ccmeEphoneKeyPhone

Read-only

Whether or not the ephone is marked as "key" ephone:

true—Key ephone

false—Not key ephone

 

ccmeEphoneAutoLineInEnabled

Read-only

Whether or not automatic line (ephone-dn) selection for incoming call is available:

true—Enabled

false—Disabled

 

ccmeEphoneAftHrsBlkExmptEnabled

Read-only

Whether or not this ephone is exempt from after-hours blocking:

true—Exempt from blocking

false—Included in blocking

 

ccmeEphoneNightBellSvcEnabled

Read-only

Whether or not night-bell service is enabled on this ephone:

true—Enabled

false—Disabled

 

ccmeEphoneKeepConfEnabled

Read-only

Whether or not the call is disconnected when conference initiator hangs up:

true—Not disconnected (connect remaining parties together directly using call transfer)

false—Disconnected.

 

ccmeEphoneSpeedDialConfTable

Not-accessible

Information about configured speed dial entries for all ephones.

 

ccmeEphoneSpeedDialConfEntry

Not-accessible

Information about all configured speed dial entries for an ephone. There is an entry created for each speed dial configured on this device. An entry is deleted from this table when the speed dial configuration is removed, which includes the following objects:

ccmeEphoneSpeedDialTableIndex

ccmeEphoneSpeedDialTag

ccmeEphoneSpeedDialNumber

ccmeEphoneSpeedDialLabel

 

ccmeEphoneSpeedDialTableIndex

Not-accessible

An arbitrary and unique index for CcmeEphoneSpeedDialConfEntry.

 

ccmeEphoneSpeedDialTag

Read-only

Unique identifier tag configured for a speed-dial entry.

 

ccmeEphoneSpeedDialNumber

Read-only

Configured speed-dial E.164 phone extension number that is associated with a line (ephone-dn) on this ephone.

 

ccmeEphoneSpeedDialLabel

Read-only

Text to be displayed next to the speed-dial button on an ephone.

 

ccmeEphoneFastDialConfTable

Not-accessible

Information about configured fast-dial entries for all ephones.

 

ccmeEphoneFastDialConfEntry

Not-accessible

Information about all configured fast-dial entries for an ephone. An entry created for each fast dial configured on this device. An entry is deleted from this table when fast-dial configuration is removed from this device, which includes the following objects:

ccmeEphoneFastDialTableIndex

ccmeEphoneFastDialNumber

ccmeEphoneFastDialName

 

ccmeEphoneFastDialTableIndex

Not-accessible

An arbitrary and unique index for this CcmeEphoneFastDialConfEntry.

 

ccmeEphoneFastDialNumber

Read-only

Configured fast-dial E.164 phone extension number that is associated with this ephone. No primary number is associated as a default.

 

ccmeEphoneFastDialName

Read-only

Configured name associated with the fast-dial E.164 phone extension number that is associated with this ephone. When no name is associated, this object returns a string length of zero.

 

ccmeEphoneBtnDNAssocConfTable

Not-accessible

Information about all configured DN and button associations for all ephones.

 

ccmeEphoneBtnDNAssocConfEntry

Not-accessible

Information about configured DN and button association entries for an ephone. There is an entry in this table for each DN and button association that is configured on this device. An entry is deleted once the configuration is deleted from this device, which includes the following objects:

ccmeEphoneButtonNumber

ccmeEphoneOverlayDN

 

ccmeEphoneButtonNumber

Not-accessible

Button number of an ephone.

 

ccmeEphoneOverlayDN

Read-only

Overlay DNs configured for this button on this ephone.

 

ccmeEphoneDnConfigTable

Not-accessible

List of configured ephone-dns (directory numbers or extensions) for ephone lines on this device.

 

ccmeEphoneDnConfigEntry

Not-accessible

Information about each configured extension or DN. There is an entry in this table for each ephone-dn configured on this device. In Survivable Remote Site Telephone (SRST) mode, an entry is created for each ephone-dn automatically generated. An entry is deleted from this table if the ephone-dn is unconfigured on this device, which includes the following objects:

ccmeEphoneDnTag

ccmeEphoneDnType

ccmeEphoneDnMode

ccmeEphoneDnPriNum

ccmeEphoneDnSecNum

ccmeEphoneDnName

ccmeEphoneDnLabel

ccmeEphoneDnPriPref

ccmeEphoneDnSecPref

ccmeEphoneDnCFBusyNum

ccmeEphoneDnCFAllNum

ccmeEphoneDnCFNoAnNum

ccmeEphoneDnCFNoAnTo

 

CcmeEphoneDnConfigEntry

 

ccmeEphoneDnHuntstop

ccmeEphoneDnMwiCapability

ccmeEphoneDnHuntstopCh

ccmeEphoneDnHoldAltTo

ccmeEphoneDnHoldAltType

ccmeEphoneDnMwiSipSubscrEnabled

ccmeEphoneDnScriptName

 

ccmeEphoneDnTag

Not-accessible

Unique sequence number that indicates an ephone extension (ephone-dn) configured on this device.

 

ccmeEphoneDnType

Read-only

Extension type of the line:

extension(1)—Ephone line

intercom(2)—Part of pair of intercom line

paging(3)—Type to receive audio pages

moh(4)—Type to address MOH

mwi(5)—Type to address MWI

parkslot(6)—Type to address call park slot

loopback(7)—Loopback directory number

 

ccmeEphoneDnMode

Read-only

Mode of the line:

single(1)—Single-line mode.

dual(2)—Dual-line mode that has one virtual voice port and two channels to handle two independent calls. This allows call waiting, call transfer and conference functions within a single line (ephone-dn).

 

ccmeEphoneDnPriNum

Read-only

Primary E.164 phone extension number that is associated with a line (ephone-dn) on this device No primary number is associated as a default.

 

ccmeEphoneDnSecNum

Read-only

Second E.164 phone extension number that is associated with a line (ephone-dn) on this device.

 

ccmeEphoneDnName

Read-only

Name of the person associated with this extension (ephone-dn). If no specific name of a person is associated with the ephone, then this object contains a zero-length string.

 

ccmeEphoneDnLabel

Read-only

Text string that is displayed on the ephone console instead of the extension phone number.

 

ccmeEphoneDnPriPref

Read-only

Preference for the primary number associated with an extension.

Range: 0 to 10, where 0 is highest and 10 is lowest.

 

ccmeEphoneDnSecPref

Read-only

Preference for the secondary number associated with an extension.

Range: 0 to 10, where 0 is highest and 10 is lowest.

 

ccmeEphoneDnCFBusyNum

Read-only

E.164 phone number to which calls are forwarded for any incoming call to a busy extension. If no specific call forwarding phone number is associated with the ephone, then this object contains a zero-length string.

 

ccmeEphoneDnCFAllNum

Read-only

E.164 phone number to which calls are forwarded for all incoming call to an extension (ephone-dn). If no specific call forwarding all phone number is associated with the ephone, then this object contains a zero-length string.

 

ccmeEphoneDnCFNoAnNum

Read-only

E.164 phone number to which calls are forwarded for all the incoming calls to an extension (ephone-dn) that does not answer. If no specific call forwarding number is associated with the ephone, then this object contains a zero-length string.

 

ccmeEphoneDnCFNoAnTo

Read-only

How long a call rings with no answer before the call is forwarded to another extension, line, or DN.

 

ccmeEphoneDnMwiCapability

Read-only

Capability of an extension (ephone-dn) to process MWI notification from an external voice-messaging system:

mwiOn(1)—Extension can process MWI ON notifications using either the main or secondary phone number.

mwiOff(2)—Extension can process MWI OFF notifications using either the main or secondary phone number.

mwiOnOff(3)—Extension can process both MWI ON and OFF notifications using either the main or secondary phone number.

mwiDisabled(4)—MWI notifications are disabled on an extension.

 

ccmeEphoneDnHuntstop

Read-only

Call-hunting behavior for an extension (ephone-dn). If the value of this object is "true", an incoming call does not roll over (hunt) to another ephone-dn when the called ephone-dn is busy or does not answer, providing that a hunting strategy has been established, which includes this ephone-dn.

 

ccmeEphoneDnHuntstopCh

Read-only

Call-hunting behavior for an extension (ephone-dn) channel. If this object is enabled on dual-line extensions, an incoming call does not roll over (hunt) to another channel when the first channel is busy or does not answer on this ephone-dn.

 

ccmeEphoneDnHoldAltTo

Read-only

Timeout, in seconds, for repeating audible alert notification when a call is on hold on an ephone.

Range is 15 to 300.

By default this hold alert feature is disabled. When it is disabled, this object returns a zero value.

 

ccmeEphoneDnHoldAltType

Read-only

When hold alert audible notification is repeated on an ephone:

idle(1)—Alerts only when the ephone is idle.

originator(2)—Alerts when the ephone is idle or busy.

shared(3)—Alerts only when the ephone is idle but alerts all ephones that share the line.

 

ccmeEphoneDnMwiSipSubscrEnabled

Read-only

Whether or not this extension (DN) in a Cisco CME system is subscribed to a SIP-based MWI server:

true—Extension can receive MWI from a SIP-based MWI server.

false—Extension is not subscribed to receive MWI.

 

ccmeEphoneDnScriptName

Read-only

Session level IVR application script in Tool Command Language (TCL) for this extension (ephone-dn) in a Cisco CME system. By default no application script is selected for an extension, and the object length in this case returns a string of zero length.

 

-- Notification Configuration

 
 

ccmeNotificationEnable

read-write

Whether or not the system produces the Cisco CME notifications:

true—Generation of notifications is enabled.

false—Generation of notifications is disabled.

DEFVAL: true

 

ccmeSysTrapSeverity

Read-only

Internally defined severity of the particular alarm condition, associated with the most recent notification. A subsequent event in which the alarm condition changes from its failed state back to a "normal" state has a severity of "clear".

clear (1)

minor (2)

major (3)

 

ccmeSysNotificationReason

Read-only

Internally defined failure cause of the particular alarm condition that is associated with the most recent trap.

 

ccmeEphoneUnRegThreshold

read-write

Threshold that limits the unregistration trap notification.

 

ccmeEphoneTrapReason

Read-only

Internally defined failure cause of the particular alarm condition, associated with the most recent ephone trap.

 

ccmeUserAutoLogoutTo

Read-only

Length of time, in seconds, before the users of ephones in a Cisco CME system are automatically logged out.

 

ccmeUserLoginDeactivateTime

Read-only

Specified time of day when user logins for all ephones are deactivated.

 

ccmeMwiSipServerIpAddress

Read-only

Designated IP address to an external SIP based MWI server. The type of this address is determined by the value of the ccmeSysIPAddressType object.

 

ccmeMwiSipServerTransportType

Read-only

Transport layer protocol used when connecting to external SIP-based MWI servers:

tcp(1)—TCP as transport layer protocol

udp(2)—UDP as transport layer protocol

 

ccmeMwiSipServerPortNumber

Read-only

Port number for the MWI server.

DEFVAL: 5060

 

ccmeMwiSipServerRegE164Enabled

Read-only

Whether or not an E.164 number rather than an extension number is registered with SIP proxy or registrar:

true—E.164 is registered.

false—The extension number is registered.

 

ccmeMwiSipSvrUnsolicitedEnabled

Read-only

Whether or not SIP NOTIFY for MWI is sent without a SUBSCRIBE from Cisco CME:

true—SIP NOTIFY is sent without SIP SUBSCRIBE.

false—Solicited NOTIFY is sent.

 

ccmeCorConfTable

Not-accessible

List of class of restrictions (COR) configured on this device.

 

ccmeCorConfEntry

Not-accessible

Information about a COR-configured entry. There is an entry for each COR configured on this device. An entry is deleted if the COR is removed from configuration, which includes the following objects:

ccmeCorTableIndex

ccmeCorTag

ccmeCorListName

ccmeCorDirection

ccmeCorScope

ccmeCorStartingNumber

ccmeCorEndingNumber

ccmeCorVoiceRegPoolNumber

ccmeCorListDefaultEnabled

 

ccmeCorTableIndex

Not-accessible

An arbitrary and unique index for this CcmeCorConfEntry.

 

ccmeCorTag

Read-only

Tag number. If the ccmeEnabled object is true for Cisco CME mode, then this object indicates the ephone-dn tag under which the COR was configured. If the csrstEnabled object is true for SRST mode, then this object indicates the COR list identifier configured under SRST configuration or voice registrar configuration.

 

ccmeCorListName

Read-only

COR list name configured on this device.

 

ccmeCorScope

Read-only

Scope of this COR list for a list of associated dial-peers:

ccme(1)—COR is applicable to the dial-peer associated with the ciscoCorTag ephone-dn object.

srstSccp(2)—COR is applicable to all the dynamically created dial-peers under SCCP SRST mode.

srstSip(3)—COR is applicable to all the SIP SRST dial-peers that belong to a specified voice registrar pool indicated by the ciscoCorVoiceRegPoolNumber object.

 

ccmeCorDirection

Read-only

Whether the COR to be used by incoming or outgoing dial peers.

 

ccmeCorStartingNumber

Read-only

Whether or not the starting number of a range of directory numbers for a COR list is configured on this device.

 

ccmeCorEndingNumber

Read-only

Ending number of a range of directory numbers for a COR list configured on this device.

 

ccmeCorVoiceRegPoolNumber

Read-only

Voice registrar pool number under which this COR list is applied.

 

ccmeCorListDefaultEnabled

Read-only

Whether or not the default COR list is enabled for this COR entry:

true—Default COR list is applied (this COR list takes on the behavior of a predefined default COR list)

false—Default COR list is not applied.

 

ccmeLoopbackDnConfTable

Not-accessible

List of loopback-dns (lines) configured on this device.

 

ccmeLoopbackDnConfEntry

Not-accessible

Information about a loopback-dn configured on this device. There is an entry created for each loopback-dn configured on this device. An entry is deleted if the loopback-dn is removed from this device configuration, which includes the following objects:

ccmeLoopbackDnTag

ccmeLoopbackDnforward

ccmeLoopbackDnStrip

ccmeLoopbackDnPrefix

ccmeLoopbackDnSuffix

ccmeLoopbackDnRetryTo

ccmeLoopbackDnAutoCon

ccmeLoopbackDnCodec

 

ccmeLoopbackDnTag

Not-accessible

Unique sequence number that identifies the ephone-dn loopback pairs in this device.

 

ccmeLoopbackDnforward

Read-only

Number of digits in the original called number that are forwarded to the other ephone DN in the loopback-dn pair.

 

ccmeLoopbackDnStrip

Read-only

Number of leading digits that are stripped from the original called number, which is then forwarded to the other ephone DN in the loopback-dn pair.

 

ccmeLoopbackDnPrefix

Read-only

String of digits to be added at the front of the forwarded called number.

 

ccmeLoopbackDnSuffix

Read-only

String of digits to be added at the end of the forwarded called number.

 

ccmeLoopbackDnRetryTo

Read-only

Number of seconds to wait before retrying the loopback target when it is busy or unavailable. A zero value indicates that retry is disabled and appropriate call-progress tones are passed to the call originator.

 

ccmeLoopbackDnAutoCon

Read-only

Whether or not automatic connection of the call is enabled during far-end alert:

true—Enabled. The call is immediately connected and in-band alerting is provided while waiting for the far-end destination to answer.

false—Disabled.

 

ccmeLoopbackDnCodec

Read-only

Codec type applied to the calls passing through the loopback-dn:

g711alaw(1)—G.711 a-law

g711ulaw(2)—G.711 mu-law

Options 1 and 2 override the G.711 codec type that is negotiated for the call and provide mu-law to a-law conversion if needed.

default(3)—Real-Time Transport Protocol (RTP) voice packets are passed through the loopback-dn regardless of the G.711 coding type negotiated for the calls.

 

ccmeIntercomDnConfTable

Not-accessible

List of intercom DNs (lines) configured on this device.

 

ccmeIntercomDnConfEntry

Not-accessible

Information about an intercom DN configured on this device. An entry is created for each intercom DN configured on the device. An entry is deleted if the intercom DN is removed from this device configuration, which includes the following objects:

ccmeIntercomDnTag

ccmeIntercomDnExtensionNum

ccmeIntercomDnBargeInEnabled

ccmeIntercomDnAutoAnsEnabled

ccmeIntercomDnLabel

 

ccmeIntercomDnTag

Not-accessible

Ephone-dn (line) tag number under which this intercom was configured.

 

ccmeIntercomDnExtensionNum

Read-only

Telephone number to which intercom calls are placed.

 

ccmeIntercomDnBargeInEnabled

Read-only

Inbound-intercom call behavior when an existing call is active:

true—Inbound intercom calls force the existing call into call-hold state and allow the intercom call to be answered immediately.

false—Inbound intercom calls do not barge in the existing calls.

 

ccmeIntercomDnAutoAnsEnabled

Read-only

Whether or not auto-answer is enabled for this ephone-dn:

true—Enabled

false—Disabled

 

ccmeIntercomDnLabel

Read-only

Label for the intercom configured on this device.

 

ccmeMohMulticastIpAddressType

Read-only

Address type of ccmeMohMulticastIpAddress.

Only IPv4 addresses are currently allowed.

 

ccmeMohMulticastIpAddress

Read-only

Destination IP address for multicast of the MOH audio stream. The type of this address is determined by the value of the ccmeSysIPAddressType object.

 

ccmeMohMulticastPortNumber

Read-only

Media port for multicast of the MOH audio stream.

 

ccmeMohMulticastRoute

Read-only

String of IP addresses, each separated from the other by a space, over which MOH IP multicast packets are transmitted.

ccmeActiveStatsGroup
 

ccmeEphoneCallLegs

Read-only

Active number of call legs contributed from the ephones and TAPI clients interacting with this device at this instant.

 

ccmeEphoneTot

Read-only

Total number of ephones seen by this device since the last reset.

 

ccmeEphoneTotRegistered

Read-only

Total number of ephones currently registered to this device.

 

ccmeEphoneTotKeyPhConfigured

Read-only

Total number of configured ephones marked as key ephones on this device.

 

ccmeEphoneTotKeyPhRegistered

Read-only

Total number of key ephones currently registered to this device.

 

ccmeEphoneActTable

Not-accessible

List of all ephones currently registered on this device.

 

ccmeEphoneActEntry

Not-accessible

Information about an ephone seen by this device. An entry is added for each new ephone registration in this table. The entry is removed once the ephone is deceased or reregistered, which includes the following objects:

ccmeEphoneDeviceName

ccmeEphoneRegState

ccmeEphoneActiveDN

ccmeEphoneActivityStatus

ccmeEphoneKeepAliveCnt

ccmeEphonePendingReset

ccmeEphoneRegTime

ccmeEphoneCurrentFirmwareRev

ccmeEphonePreviousFirmwareRev

ccmeEphoneLastError

ccmeEphoneObservedType

ccmeEphoneLoginStatus

ccmeEphoneDnDStatus

ccmeEphoneDebugStatus

ccmeEphoneMediaActive

ccmeEphoneTAPIClient

ccmeEphoneMediaCapability

ccmeEphoneRemote

 

ccmeEphoneDeviceName

Read-only

Type and model of ephone as seen in the registration on this device.

 

ccmeEphoneRegState

Read-only

Registration state of the ephone:

registered(1)—Phone is active.

unregistered(2)—Connection to the ephone was closed in normal manner.

deceased(3)—Connection to the ephone was closed because of a keepalive timeout.

 

ccmeEphoneActiveDN

Read-only

Current active DN (line) on the ephone.

 

ccmeEphoneActivityStatus

Read-only

Current status of the ephone as seen on this device:

onhook(1)—Phone is on-hook.

offhook(2)—Phone is off-hook.

ringing(3)—Phone is ringing.

paging(4)—Phone is receiving an audio page.

 

ccmeEphoneKeepAliveCnt

Read-only

Number of keepalive messages received from the ephone by this device since the ephone registered.

 

ccmeEphonePendingReset

Read-only

Pending reset operation on this ephone as seen by this device. With "true" indicating reset is pending.

 

ccmeEphoneRegTime

Read-only

Time that this ephone registered to this device.

 

ccmeEphoneCurrentFirmwareRev

Read-only

Current vendor-specific firmware version string provided by the ephone during registration on this device.

 

ccmeEphonePreviousFirmwareRev

Read-only

Previous vendor-specific firmware version of ephone provided during registration on this device.

 

ccmeEphoneLastError

Read-only

Reason for last reset of the ephone as seen by this device. Reason for last reset of ephone could be "TCP-timeout" or "CallManager-closed-TCP" or "Initialized".

 

ccmeEphoneObservedType

Read-only

Type and model of ephone received by this device during the registration of ephone.

 

ccmeEphoneLoginStatus

Read-only

Login status:

true—A user is currently logged in on this ephone.

false—No user is currently logged in on this ephone.

 

ccmeEphoneDnDStatus

Read-only

Do-not-disturb (DnD) status:

true—Ephone is set to DnD on one or more of its extensions.

false—No DnD is set.

 

ccmeEphoneDebugStatus

Read-only

Debug status:

true—Enabled

false—Disabled

 

ccmeEphoneMediaActive

Read-only

Whether or not a conversation is active on this ephone:

true—Active

false—Inactive

 

ccmeEphoneTAPIClient

Read-only

Whether or not ephone is a TAPI client:

true—TAPI client

false—Not a TAPI client

 

ccmeEphoneMediaCapability

Read-only

Whether or not the ephone can support video:

audioOnly(1)—Audio only

audioVideo(2)—Audio and video

 

ccmeEphoneRemote

Read-only

Whether or not the ephone is on the same LAN as the device:

true—Phone is suspected not to be on the LAN. This response is based on the Address Resolution Protocol (ARP) entry not being seen on this device.

false—Phone is on the same LAN as the device.

 

ccmeMohSource

Read-only

Cisco CME system can derive MOH from two locations:

flash(1)—The router is currently picking MOH stream from an audio file configured in flash file system. The location of the file is provided by ccmeMohFlashFile object.

liveFeed(2)—The router is currently picking MOH stream from an incoming call audio stream.

Typically, a single ephone-dn would be configured to accept liveFeed call. ccmeEphoneDnType with MOH type specifies this DN.

 

ccmeNightServiceEnabled

Read-only

Current night-service state:

true—Night service is active.

false—Night service is inactive.

ccmeHistoryStatsGroup
 

ccmeEphoneDnChStatsHistoryTable

Not-accessible

List of statistics for all ephone-dns (lines) on this device.

 

ccmeEphoneDnChStatsHistoryEntry

Not-accessible

Statistical information about an ephone-dn. An entry is added for each new ephone-dn configured in this table. An entry is removed once the ephone-dn is removed from this device configuration, which includes the following objects:

ccmeEphoneDnChNum

ccmeEphoneDnChIncoming

ccmeEphoneDnChInAnswered

ccmeEphoneDnChOutbound

ccmeEphoneDnChOutAnswered

ccmeEphoneDnChOutBusy

ccmeEphoneDnChDiscAtConn

ccmeEphoneDnChDiscAtAlert

ccmeEphoneDnChDiscAtHold

ccmeEphoneDnChDiscAtRing

ccmeEphoneDnChDiscCauseNearEnd

ccmeEphoneDnChDiscCauseFarEnd

 

ccmeEphoneDnChNum

Not-accessible

Ephone-dn (line) channel number for this entry.

 

ccmeEphoneDnChIncoming

Read-only

Total number of incoming calls received by this ephone-dn (line) channel.

 

ccmeEphoneDnChInAnswered

Read-only

Total number of incoming calls answered by this ephone-dn (line) channel.

 

ccmeEphoneDnChOutbound

Read-only

Total number of calls placed by this ephone-dn (line) channel.

 

ccmeEphoneDnChOutAnswered

Read-only

Total number of calls that were placed and answered by this ephone-dn (line) channel.

 

ccmeEphoneDnChOutBusy

Read-only

Total number of calls that were placed from this channel and were not answered because of busy line.

 

ccmeEphoneDnChDiscAtConn

Read-only

Total number of calls that were placed from this channel and were disconnected during call setup.

 

ccmeEphoneDnChDiscAtAlert

Read-only

Total number of calls that were placed from this channel and were disconnected during call alerting stage.

 

ccmeEphoneDnChDiscAtHold

Read-only

Total number of calls that were placed from this channel and were disconnected while the call was put on hold.

 

ccmeEphoneDnChDiscAtRing

Read-only

Total number of calls that were received on this channel and were disconnected during alerting state.

 

ccmeEphoneDnChDiscCauseNearEnd

Read-only

Last near-end disconnect cause code seen by this channel.

 

ccmeEphoneDnChDiscCauseFarEnd

Read-only

Last far-end disconnect cause code seen by this channel.

ccmeNotifGroup
 

ccmeStatusChangeNotif

 

Notification generated if there is a change in ccmeEnabled. This notification is generated only when the value of the ccmeNotificationEnable object is true and includes the following objects:

ccmeSysTrapSeverity

ccmeEnabled

ccmeSysNotificationReason

 

ccmeEphoneUnRegThresholdExceed

Notification-Type

Notification generated every time the total number of ephones registered is exceeded and then drops below the threshold specified by the ccmeEphoneUnRegThreshold object. This object is generated only if the ccmeNotificationEnable object is true.

ccmeEphoneUnRegThreshold

 

ccmeEPhoneDeceased

Notification-Type

Notification generated every time the registered ephone changes state to Deceased, indicating that the connection to the ephone was closed because of a keepalive timeout. This objects is generated only if the ccmeNotificationEnable object is true.

ccmeEphoneIpAddress

ccmeEphoneRegState

 

ccmeEPhoneRegFailed

Notification-Type

Notification generated when an ephone attempts to register but fails. This notification is only for those failures seen by the Cisco CME or SRST gateway. This object is generated only if the ccmeNotificationEnable object is true.

ccmeEphoneIpAddress

ccmeEphoneTrapReason

 

ccmeEphoneLoginFailed

Notification-Type

Notification generated when an ephone user login is rejected/failed. This object is generated only if the ccmeNotificationEnable object is true.

ccmeEphoneIpAddress

ccmeEphoneTrapReason

 

ccmeNightServiceChangeNotif

Notification-Type

Notification generated if there is a change in night service status on this device. This object is generated only if the ccmeNotificationEnable object is true.

ccmeEphoneTrapReason

 

ccmeLivefeedMohFailedNotif

Notification-Type

Notification generated when the MOH live feed has failed. This objects is generated only if the ccmeNotificationEnable object is true.

ccmeEphoneTrapReason

 

ccmeMaxConferenceNotif

Notification-Type

Notification generated if the maximum number of simultaneous three-party conferences supported by the Cisco CME is exceeded. This object is generated only if the ccmeNotificationEnable object is true.

ccmeEphoneTrapReason

 

ccmeKeyEphoneRegChangeNotif

Notification-Type

Notification generated if there is a change in the registration status of the key ephone. This object is generated only if the ccmeNotificationEnable object is true.

ccmeEphoneIpAddress

ccmeEphoneRegState

ccmeConfigGroup

   

Collection of objects that are used to show the configuration of Cisco CallManager Express feature.

ccmeEnabled

ccmeVersion

ccmeIPAddressType

ccmeIPAddress

ccmePortNumber

ccmeMaxEphones

ccmeMaxDirectoryNumber

ccmeMaxConferences

ccmeMaxRedirect

ccmeScriptName

ccmeVoiceMailNumber

ccmeMwiRelay

ccmeMwiExpires

ccmeTransferSystem

ccmeTimeFormat

ccmeDateFormat

ccmeUrlforServicesBtn

ccmeUrlforDirectoriesBtn

ccmeMohFlashFile

ccmeMohMulticastFromFlashEnabled

ccmeMohFlashMulticastIPAddrType

ccmeMohFlashMulticastIPAddr

ccmeMohFlashMulticastPortNum

ccmePhoneType

ccmePhoneFirmwareRev

ccmeTransferPattern

ccmeTransferPatternType

ccmeWebGUIEditEnabled

ccmeWebGUITimeEnabled

ccmeAfterHrsBlockPattern

ccmeAfterHrsBlockPatternAllTime

ccmeAfterHrsBlockDateMonth

ccmeAfterHrsBlockDate

     

ccmeAfterHrsBlockDateStartHour

ccmeAfterHrsBlockDateStartMin

ccmeAfterHrsBlockDateStopHour

ccmeAfterHrsBlockDateStopMin

ccmeAfterHrsBlockDay

ccmeAfterHrsBlockDayStartHour

ccmeAfterHrsBlockDayStartMin

ccmeAfterHrsBlockDayStopHour

ccmeAfterHrsBlockDayStopMin

ccmeNightServiceCode

ccmeNightServiceDateMonth

ccmeNightServiceDate

ccmeNightServiceDateStartHour

ccmeNightServiceDateStartMin

ccmeNightServiceDateStopHour

ccmeNightServiceDateStopMin

ccmeNightServiceDay

ccmeNightServiceDayStartHour

ccmeNightServiceDayStartMin

ccmeNightServiceDayStopHour

ccmeNightServiceDayStopMin

ccmeFXOHookFlashEnabled

ccmeSecondaryDialTonePrefix

ccmeWebAdminSystemUser

ccmeWebAdminCustomerUser

ccmeSystemMessage

ccmeDialplanPatternTag

ccmeDialplanPattern

ccmeDialplanExtLength

ccmeDialplanExtPattern

ccmeDialplanAllowRegiEnabled

ccmeKeepAliveTimeout

ccmeInterDigitTimeout

ccmeBusyTimeout

ccmeAlertTimeout

     

ccmeEphoneIpAddressType

ccmeEphoneIpAddress

ccmeEphoneMacAddress

ccmeEphoneModel

ccmeEphoneDnType

ccmeEphoneDnMode

ccmeEphoneDnPriNum

ccmeEphoneDnSecNum

ccmeEphoneDnName

ccmeEphoneDnLabel

ccmeEphoneDnPriPref

ccmeEphoneDnSecPref

ccmeEphoneDnCFBusyNum

ccmeEphoneDnCFAllNum

ccmeEphoneDnCFNoAnNum

ccmeEphoneDnCFNoAnTo

ccmeEphoneDnMwiCapability

ccmeEphoneDnHuntstop

ccmeEphoneDnHuntstopCh

ccmeEphoneDnHoldAltTo

ccmeEphoneDnHoldAltType

ccmeEphoneDnMwiSipSubscrEnabled

ccmeEphoneDnScriptName

ccmeEphoneUsername

ccmeNotificationEnable

ccmeSysTrapSeverity

ccmeSysNotificationReason

ccmeEphoneUnRegThreshold

ccmeEphoneKeyPhone

ccmeEphoneKeepAlive

ccmeEphoneAutoLineInEnabled

ccmeEphoneAutoLineOut

ccmeEphonePagingDn

ccmeEphonePagingPolicy

ccmeEphoneTemplate

     

ccmeEphoneAftHrsBlkExmptEnabled

ccmeEphoneNightBellSvcEnabled

ccmeEphoneAddon

ccmeEphoneKeepConfEnabled

ccmeEphoneTrapReason

ccmeUserAutoLogoutTo

ccmeUserLoginDeactivateTime

ccmeMwiSipServerIpAddress

ccmeMwiSipServerTransportType

ccmeMwiSipServerPortNumber

ccmeMwiSipServerRegE164Enabled

ccmeMwiSipSvrUnsolicitedEnabled

ccmeCorTag

ccmeCorListName

ccmeCorScope

ccmeCorDirection

ccmeCorStartingNumber

ccmeCorEndingNumber

ccmeCorVoiceRegPoolNumber

ccmeCorListDefaultEnabled

ccmeLoopbackDnforward

ccmeLoopbackDnStrip

ccmeLoopbackDnPrefix

ccmeLoopbackDnSuffix

ccmeLoopbackDnRetryTo

ccmeLoopbackDnAutoCon

ccmeLoopbackDnCodec

ccmeIntercomDnExtensionNum

ccmeIntercomDnBargeInEnabled

ccmeIntercomDnAutoAnsEnabled

ccmeIntercomDnLabel

ccmeEphoneSpeedDialTag

ccmeEphoneSpeedDialNumber

ccmeEphoneSpeedDialLabel

ccmeEphoneFastDialNumber

     

ccmeEphoneFastDialName

ccmeEphoneOverlayDN

ccmeMohMulticastIpAddressType

ccmeMohMulticastIpAddress

ccmeMohMulticastPortNumber

ccmeMohMulticastRoute

ccmeActiveStatsGroup

 

Collection of objects that show the active status of Cisco CallManager Express, ephone and ephone-dn.

ccmeEphoneCallLegs

ccmeEphoneTot

ccmeEphoneTotRegistered

ccmeEphoneTotKeyPhConfigured

ccmeEphoneTotKeyPhRegistered

ccmeEphoneDeviceName

ccmeEphoneRegState

ccmeEphoneActiveDN

ccmeEphoneActivityStatus

ccmeEphoneKeepAliveCnt

ccmeEphonePendingReset

ccmeEphoneRegTime

ccmeEphoneCurrentFirmwareRev

ccmeEphonePreviousFirmwareRev

ccmeEphoneLastError

ccmeEphoneObservedType

ccmeEphoneLoginStatus

ccmeEphoneDnDStatus

ccmeEphoneDebugStatus

ccmeEphoneMediaActive

ccmeEphoneTAPIClient

ccmeEphoneMediaCapability

ccmeEphoneRemote

ccmeMohSource

ccmeNightServiceEnabled

ccmeHistoryStatsGroup

 

Group of objects that display the history status of ephone-dn:

ccmeEphoneDnChIncoming

ccmeEphoneDnChInAnswered

ccmeEphoneDnChOutbound

ccmeEphoneDnChOutAnswered

ccmeEphoneDnChOutBusy

ccmeEphoneDnChDiscAtConn

ccmeEphoneDnChDiscAtAlert

ccmeEphoneDnChDiscAtHold

ccmeEphoneDnChDiscAtRing

ccmeEphoneDnChDiscCauseNearEnd

ccmeEphoneDnChDiscCauseFarEnd

ccmeNotifGroup NOTIFICATION-GROUP

 

Collection of notifications for the Cisco CME features:

ccmeStatusChangeNotif

ccmeEphoneUnRegThresholdExceed

ccmeEPhoneDeceased

ccmeEPhoneRegFailed

ccmeEphoneLoginFailed

ccmeNightServiceChangeNotif

ccmeLivefeedMohFailedNotif

ccmeMaxConferenceNotif

ccmeKeyEphoneRegChangeNotif


Cisco CME MIB Object Groups

Table 7 lists the CISCO-CCME-MIB objects, arranged according to their group. The following four CISCO-CCME-MIB groups are listed:

ccmeConfig

ccmeActiveStats

ccmeHistoryStats

ccmeMIBNotifications

The CISCO-CCME-MIB object IDs are listed in Table 10.

{

Table 10 ciscoCcmeMIB Object ID Mapping 

Object Name
Object ID

ciscoMgmt

1.3.6.1.4.1.9.9

ciscoCcmeMIB

1.3.6.1.4.1.9.9.439

ccmeStatusChangeNotif

1.3.6.1.4.1.9.9.439.0.0.1

ccmeEphoneUnRegThresholdExceed

1.3.6.1.4.1.9.9.439.0.0.2

ccmeEPhoneDeceased

1.3.6.1.4.1.9.9.439.0.0.3

ccmeEPhoneRegFailed

1.3.6.1.4.1.9.9.439.0.0.4

ccmeEphoneLoginFailed

1.3.6.1.4.1.9.9.439.0.0.5

ccmeNightServiceChangeNotif

1.3.6.1.4.1.9.9.439.0.0.6

ccmeLivefeedMohFailedNotif

1.3.6.1.4.1.9.9.439.0.0.7

ccmeMaxConferenceNotif

1.3.6.1.4.1.9.9.439.0.0.8

ccmeKeyEphoneRegChangeNotif

1.3.6.1.4.1.9.9.439.0.0.9

ciscoCcmeMIBObjects

1.3.6.1.4.1.9.9.439.1

ccmeConfig

1.3.6.1.4.1.9.9.439.1.1

ccmeEnabled

1.3.6.1.4.1.9.9.439.1.1.1

ccmeVersion

1.3.6.1.4.1.9.9.439.1.1.2

ccmeIPAddressType

1.3.6.1.4.1.9.9.439.1.1.3

ccmeIPAddress

1.3.6.1.4.1.9.9.439.1.1.4

ccmePortNumber

1.3.6.1.4.1.9.9.439.1.1.5

ccmeMaxEphones

1.3.6.1.4.1.9.9.439.1.1.6

ccmeMaxDirectoryNumber

1.3.6.1.4.1.9.9.439.1.1.7

ccmeMaxConferences

1.3.6.1.4.1.9.9.439.1.1.8

ccmeMaxRedirect

1.3.6.1.4.1.9.9.439.1.1.9

ccmeScriptName

1.3.6.1.4.1.9.9.439.1.1.10

ccmeVoiceMailNumber

1.3.6.1.4.1.9.9.439.1.1.11

ccmeMwiRelay

1.3.6.1.4.1.9.9.439.1.1.12

ccmeMwiExpires

1.3.6.1.4.1.9.9.439.1.1.13

ccmeTransferSystem

1.3.6.1.4.1.9.9.439.1.1.14

ccmeTimeFormat

1.3.6.1.4.1.9.9.439.1.1.15

ccmeDateFormat

1.3.6.1.4.1.9.9.439.1.1.16

ccmeUrlforServicesBtn

1.3.6.1.4.1.9.9.439.1.1.17

ccmeUrlforDirectoriesBtn

1.3.6.1.4.1.9.9.439.1.1.18

ccmeMohFlashFile

1.3.6.1.4.1.9.9.439.1.1.19

ccmeMohMulticastFromFlashEnabled

1.3.6.1.4.1.9.9.439.1.1.20

ccmeMohFlashMulticastIPAddr

1.3.6.1.4.1.9.9.439.1.1.21

ccmeMohFlashMulticastPortNum

1.3.6.1.4.1.9.9.439.1.1.22

ccmePhoneFirmwareTable

1.3.6.1.4.1.9.9.439.1.1.23

ccmePhoneFirmware

1.3.6.1.4.1.9.9.439.1.1.23.1

ccmePhoneFirmwareIndex

1.3.6.1.4.1.9.9.439.1.1.23.1.1

ccmePhoneType

1.3.6.1.4.1.9.9.439.1.1.23.1.2

ccmePhoneFirmwareRev

1.3.6.1.4.1.9.9.439.1.1.23.1.3

ccmeTransferPatternTable

1.3.6.1.4.1.9.9.439.1.1.24

ccmeTransferPattern

1.3.6.1.4.1.9.9.439.1.1.24.1

ccmeTransferPatternIndex

1.3.6.1.4.1.9.9.439.1.1.24.1.1

ccmeTransferPattern

1.3.6.1.4.1.9.9.439.1.1.24.1.2

ccmeTransferPatternType

1.3.6.1.4.1.9.9.439.1.1.24.1.3

ccmeWebGUIEditEnabled

1.3.6.1.4.1.9.9.439.1.1.25

ccmeWebGUITimeEnabled

1.3.6.1.4.1.9.9.439.1.1.26

ccmeAfterHrsBlockPatternTable

1.3.6.1.4.1.9.9.439.1.1.27

ccmeAfterHrsBlockPattern

1.3.6.1.4.1.9.9.439.1.1.27.1

ccmeAfterHrsBlockPatternTag

1.3.6.1.4.1.9.9.439.1.1.27.1.1

ccmeAfterHrsBlockPattern

1.3.6.1.4.1.9.9.439.1.1.27.1.2

ccmeAfterHrsBlockPatternAllTime

1.3.6.1.4.1.9.9.439.1.1.27.1.3

ccmeAfterHrsBlockDateTable

1.3.6.1.4.1.9.9.439.1.1.28

ccmeAfterHrsBlockDate

1.3.6.1.4.1.9.9.439.1.1.28.1

ccmeAfterHrsBlockDateIndex

1.3.6.1.4.1.9.9.439.1.1.28.1.1

ccmeAfterHrsBlockDateMonth

1.3.6.1.4.1.9.9.439.1.1.28.1.2

ccmeAfterHrsBlockDate

1.3.6.1.4.1.9.9.439.1.1.28.1.3

ccmeAfterHrsBlockDateStartHour

1.3.6.1.4.1.9.9.439.1.1.28.1.4

ccmeAfterHrsBlockDateStartMin

1.3.6.1.4.1.9.9.439.1.1.28.1.5

ccmeAfterHrsBlockDateStopHour

1.3.6.1.4.1.9.9.439.1.1.28.1.6

ccmeAfterHrsBlockDateStopMin

1.3.6.1.4.1.9.9.439.1.1.28.1.7

ccmeAfterHrsBlockDayTable

1.3.6.1.4.1.9.9.439.1.1.29

ccmeAfterHrsBlockDay

1.3.6.1.4.1.9.9.439.1.1.29.1

ccmeAfterHrsBlockDayIndex

1.3.6.1.4.1.9.9.439.1.1.29.1.1

ccmeAfterHrsBlockDay

1.3.6.1.4.1.9.9.439.1.1.29.1.2

ccmeAfterHrsBlockDayStartHour

1.3.6.1.4.1.9.9.439.1.1.29.1.3

ccmeAfterHrsBlockDayStartMin

1.3.6.1.4.1.9.9.439.1.1.29.1.4

ccmeAfterHrsBlockDayStopHour

1.3.6.1.4.1.9.9.439.1.1.29.1.5

ccmeAfterHrsBlockDayStopMin

1.3.6.1.4.1.9.9.439.1.1.29.1.6

ccmeNightServiceCode

1.3.6.1.4.1.9.9.439.1.1.30

ccmeNightServiceDateTable

1.3.6.1.4.1.9.9.439.1.1.31

ccmeNightServiceDate

1.3.6.1.4.1.9.9.439.1.1.31.1

ccmeNightServiceDateIndex

1.3.6.1.4.1.9.9.439.1.1.31.1.1

ccmeNightServiceDateMonth

1.3.6.1.4.1.9.9.439.1.1.31.1.2

ccmeNightServiceDate

1.3.6.1.4.1.9.9.439.1.1.31.1.3

ccmeNightServiceDateStartHour

1.3.6.1.4.1.9.9.439.1.1.31.1.4

ccmeNightServiceDateStartMin

1.3.6.1.4.1.9.9.439.1.1.31.1.5

ccmeNightServiceDateStopHour

1.3.6.1.4.1.9.9.439.1.1.31.1.6

ccmeNightServiceDateStopMin

1.3.6.1.4.1.9.9.439.1.1.31.1.7

ccmeNightServiceDayTable

1.3.6.1.4.1.9.9.439.1.1.32

ccmeNightServiceDay

1.3.6.1.4.1.9.9.439.1.1.32.1

ccmeNightServiceDayIndex

1.3.6.1.4.1.9.9.439.1.1.32.1.1

ccmeNightServiceDay

1.3.6.1.4.1.9.9.439.1.1.32.1.2

ccmeNightServiceDayStartHour

1.3.6.1.4.1.9.9.439.1.1.32.1.3

ccmeNightServiceDayStartMin

1.3.6.1.4.1.9.9.439.1.1.32.1.4

ccmeNightServiceDayStopHour

1.3.6.1.4.1.9.9.439.1.1.32.1.5

ccmeNightServiceDayStopMin

1.3.6.1.4.1.9.9.439.1.1.32.1.6

ccmeFXOHookFlashEnabled

1.3.6.1.4.1.9.9.439.1.1.33

ccmeSecondaryDialTonePrefix

1.3.6.1.4.1.9.9.439.1.1.34

ccmeWebAdminSystemUser

1.3.6.1.4.1.9.9.439.1.1.35

ccmeWebAdminCustomerUser

1.3.6.1.4.1.9.9.439.1.1.36

ccmeSystemMessage

1.3.6.1.4.1.9.9.439.1.1.37

ccmeDialplanPatternTable

1.3.6.1.4.1.9.9.439.1.1.38

ccmeDialplanPattern

1.3.6.1.4.1.9.9.439.1.1.38.1

ccmeDialplanPatternIndex

1.3.6.1.4.1.9.9.439.1.1.38.1.1

ccmeDialplanPatternTag

1.3.6.1.4.1.9.9.439.1.1.38.1.2

ccmeDialplanExtLength

1.3.6.1.4.1.9.9.439.1.1.38.1.3

ccmeDialplanPattern

1.3.6.1.4.1.9.9.439.1.1.38.1.4

ccmeDialplanExtPattern

1.3.6.1.4.1.9.9.439.1.1.38.1.5

ccmeDialplanAllowRegiEnabled

1.3.6.1.4.1.9.9.439.1.1.38.1.6

ccmeKeepAliveTimeout

1.3.6.1.4.1.9.9.439.1.1.39

ccmeInterDigitTimeout

1.3.6.1.4.1.9.9.439.1.1.40

ccmeBusyTimeout

1.3.6.1.4.1.9.9.439.1.1.41

ccmeAlertTimeout

1.3.6.1.4.1.9.9.439.1.1.42

ccmeEphoneConfTable

1.3.6.1.4.1.9.9.439.1.1.43

ccmeEphoneConf

1.3.6.1.4.1.9.9.439.1.1.43.1

ccmeEphoneTag

1.3.6.1.4.1.9.9.439.1.1.43.1.1

ccmeEphoneIpAddressType

1.3.6.1.4.1.9.9.439.1.1.43.1.2

ccmeEphoneIpAddress

1.3.6.1.4.1.9.9.439.1.1.43.1.3

ccmeEphoneMacAddress

1.3.6.1.4.1.9.9.439.1.1.43.1.4

ccmeEphoneModel

1.3.6.1.4.1.9.9.439.1.1.43.1.5

ccmeEphoneUsername

1.3.6.1.4.1.9.9.439.1.1.43.1.6

ccmeEphoneKeepAlive

1.3.6.1.4.1.9.9.439.1.1.43.1.7

ccmeEphoneAutoLineOut

1.3.6.1.4.1.9.9.439.1.1.43.1.8

ccmeEphonePagingDn

1.3.6.1.4.1.9.9.439.1.1.43.1.9

ccmeEphoneAddon

1.3.6.1.4.1.9.9.439.1.1.43.1.10

ccmeEphoneTemplate

1.3.6.1.4.1.9.9.439.1.1.43.1.11

ccmeEphonePagingPolicy

1.3.6.1.4.1.9.9.439.1.1.43.1.12

ccmeEphoneKeyPhone

1.3.6.1.4.1.9.9.439.1.1.43.1.13

ccmeEphoneAutoLineInEnabled

1.3.6.1.4.1.9.9.439.1.1.43.1.14

ccmeEphoneAftHrsBlkExmptEnabled

1.3.6.1.4.1.9.9.439.1.1.43.1.15

ccmeEphoneNightBellSvcEnabled

1.3.6.1.4.1.9.9.439.1.1.43.1.16

ccmeEphoneKeepConfEnabled

1.3.6.1.4.1.9.9.439.1.1.43.1.17

ccmeEphoneSpeedDialConfTable

1.3.6.1.4.1.9.9.439.1.1.44

ccmeEphoneSpeedDialConf

1.3.6.1.4.1.9.9.439.1.1.44.1

ccmeEphoneSpeedDialTableIndex

1.3.6.1.4.1.9.9.439.1.1.44.1.1

ccmeEphoneSpeedDialTag

1.3.6.1.4.1.9.9.439.1.1.44.1.2

ccmeEphoneSpeedDialNumber

1.3.6.1.4.1.9.9.439.1.1.44.1.3

ccmeEphoneSpeedDialLabel

1.3.6.1.4.1.9.9.439.1.1.44.1.4

ccmeEphoneFastDialConfTable

1.3.6.1.4.1.9.9.439.1.1.45

ccmeEphoneFastDialConf

1.3.6.1.4.1.9.9.439.1.1.45.1

ccmeEphoneFastDialTableIndex

1.3.6.1.4.1.9.9.439.1.1.45.1.1

ccmeEphoneFastDialNumber

1.3.6.1.4.1.9.9.439.1.1.45.1.2

ccmeEphoneFastDialName

1.3.6.1.4.1.9.9.439.1.1.45.1.3

ccmeEphoneBtnDNAssocConfTable

1.3.6.1.4.1.9.9.439.1.1.46

ccmeEphoneBtnDNAssocConf

1.3.6.1.4.1.9.9.439.1.1.46.1

ccmeEphoneButtonNumber

1.3.6.1.4.1.9.9.439.1.1.46.1.1

ccmeEphoneOverlayDN

1.3.6.1.4.1.9.9.439.1.1.46.1.2

ccmeEphoneDnConfigTable

1.3.6.1.4.1.9.9.439.1.1.47

ccmeEphoneDnConfig

1.3.6.1.4.1.9.9.439.1.1.47.1

ccmeEphoneDnTag

1.3.6.1.4.1.9.9.439.1.1.47.1.1

ccmeEphoneDnType

1.3.6.1.4.1.9.9.439.1.1.47.1.2

ccmeEphoneDnMode

1.3.6.1.4.1.9.9.439.1.1.47.1.3

ccmeEphoneDnPriNum

1.3.6.1.4.1.9.9.439.1.1.47.1.4

ccmeEphoneDnSecNum

1.3.6.1.4.1.9.9.439.1.1.47.1.5

ccmeEphoneDnName

1.3.6.1.4.1.9.9.439.1.1.47.1.6

ccmeEphoneDnLabel

1.3.6.1.4.1.9.9.439.1.1.47.1.7

ccmeEphoneDnPriPref

1.3.6.1.4.1.9.9.439.1.1.47.1.8

ccmeEphoneDnSecPref

1.3.6.1.4.1.9.9.439.1.1.47.1.9

ccmeEphoneDnCFBusyNum

1.3.6.1.4.1.9.9.439.1.1.47.1.10

ccmeEphoneDnCFAllNum

1.3.6.1.4.1.9.9.439.1.1.47.1.11

ccmeEphoneDnCFNoAnNum

1.3.6.1.4.1.9.9.439.1.1.47.1.12

ccmeEphoneDnCFNoAnTo

1.3.6.1.4.1.9.9.439.1.1.47.1.13

ccmeEphoneDnMwiCapability

1.3.6.1.4.1.9.9.439.1.1.47.1.14

ccmeEphoneDnHuntstop

1.3.6.1.4.1.9.9.439.1.1.47.1.15

ccmeEphoneDnHuntstopCh

1.3.6.1.4.1.9.9.439.1.1.47.1.16

ccmeEphoneDnHoldAltTo

1.3.6.1.4.1.9.9.439.1.1.47.1.17

ccmeEphoneDnHoldAltType

1.3.6.1.4.1.9.9.439.1.1.47.1.18

ccmeEphoneDnMwiSipSubscrEnabled

1.3.6.1.4.1.9.9.439.1.1.47.1.19

ccmeEphoneDnScriptName

1.3.6.1.4.1.9.9.439.1.1.47.1.20

ccmeNotificationEnable

1.3.6.1.4.1.9.9.439.1.1.48 (read-write)

ccmeSysTrapSeverity

1.3.6.1.4.1.9.9.439.1.1.49

ccmeSysNotificationReason

1.3.6.1.4.1.9.9.439.1.1.50

ccmeEphoneUnRegThreshold

1.3.6.1.4.1.9.9.439.1.1.51 (read-write)

ccmeEphoneTrapReason

1.3.6.1.4.1.9.9.439.1.1.52

ccmeUserAutoLogoutTo

1.3.6.1.4.1.9.9.439.1.1.53

ccmeUserLoginDeactivateTime

1.3.6.1.4.1.9.9.439.1.1.54

ccmeMwiSipServerIpAddress

1.3.6.1.4.1.9.9.439.1.1.55

ccmeMwiSipServerTransportType

1.3.6.1.4.1.9.9.439.1.1.56

ccmeMwiSipServerPortNumber

1.3.6.1.4.1.9.9.439.1.1.57

ccmeMwiSipServerRegE164Enabled

1.3.6.1.4.1.9.9.439.1.1.58

ccmeMwiSipSvrUnsolicitedEnabled

1.3.6.1.4.1.9.9.439.1.1.59

ccmeCorConfTable

1.3.6.1.4.1.9.9.439.1.1.60

ccmeCorConf

1.3.6.1.4.1.9.9.439.1.1.60.1

ccmeCorTableIndex

1.3.6.1.4.1.9.9.439.1.1.60.1.1

ccmeCorTag

1.3.6.1.4.1.9.9.439.1.1.60.1.2

ccmeCorListName

1.3.6.1.4.1.9.9.439.1.1.60.1.3

ccmeCorScope

1.3.6.1.4.1.9.9.439.1.1.60.1.4

ccmeCorDirection

1.3.6.1.4.1.9.9.439.1.1.60.1.5

ccmeCorStartingNumber

1.3.6.1.4.1.9.9.439.1.1.60.1.6

ccmeCorEndingNumber

1.3.6.1.4.1.9.9.439.1.1.60.1.7

ccmeCorVoiceRegPoolNumber

1.3.6.1.4.1.9.9.439.1.1.60.1.8

ccmeCorListDefaultEnabled

1.3.6.1.4.1.9.9.439.1.1.60.1.9

ccmeLoopbackDnConfTable

1.3.6.1.4.1.9.9.439.1.1.61

ccmeLoopbackDnConf

1.3.6.1.4.1.9.9.439.1.1.61.1

ccmeLoopbackDnTag

1.3.6.1.4.1.9.9.439.1.1.61.1.1

ccmeLoopbackDnforward

1.3.6.1.4.1.9.9.439.1.1.61.1.2

ccmeLoopbackDnStrip

1.3.6.1.4.1.9.9.439.1.1.61.1.3

ccmeLoopbackDnPrefix

1.3.6.1.4.1.9.9.439.1.1.61.1.4

ccmeLoopbackDnSuffix

1.3.6.1.4.1.9.9.439.1.1.61.1.5

ccmeLoopbackDnRetryTo

1.3.6.1.4.1.9.9.439.1.1.61.1.6

ccmeLoopbackDnAutoCon

1.3.6.1.4.1.9.9.439.1.1.61.1.7

ccmeLoopbackDnCodec

1.3.6.1.4.1.9.9.439.1.1.61.1.8

ccmeIntercomDnConfTable

1.3.6.1.4.1.9.9.439.1.1.62

ccmeIntercomDnConf

1.3.6.1.4.1.9.9.439.1.1.62.1

ccmeIntercomDnTag

1.3.6.1.4.1.9.9.439.1.1.62.1.1

ccmeIntercomDnExtensionNum

1.3.6.1.4.1.9.9.439.1.1.62.1.2

ccmeIntercomDnBargeInEnabled

1.3.6.1.4.1.9.9.439.1.1.62.1.3

ccmeIntercomDnAutoAnsEnabled

1.3.6.1.4.1.9.9.439.1.1.62.1.4

ccmeIntercomDnLabel

1.3.6.1.4.1.9.9.439.1.1.62.1.5

ccmeMohMulticastIpAddress

1.3.6.1.4.1.9.9.439.1.1.63

ccmeMohMulticastPortNumber

1.3.6.1.4.1.9.9.439.1.1.64

ccmeMohMulticastRoute

1.3.6.1.4.1.9.9.439.1.1.65

ccmeMohFlashMulticastIPAddrType

1.3.6.1.4.1.9.9.439.1.1.66

ccmeMohMulticastIpAddressType

1.3.6.1.4.1.9.9.439.1.1.67

ccmeActiveStats

1.3.6.1.4.1.9.9.439.1.2

ccmeEphoneCallLegs

1.3.6.1.4.1.9.9.439.1.2.1

ccmeEphoneTot

1.3.6.1.4.1.9.9.439.1.2.2

ccmeEphoneTotRegistered

1.3.6.1.4.1.9.9.439.1.2.3

ccmeEphoneTotKeyPhConfigured

1.3.6.1.4.1.9.9.439.1.2.4

ccmeEphoneTotKeyPhRegistered

1.3.6.1.4.1.9.9.439.1.2.5

ccmeEphoneActTable

1.3.6.1.4.1.9.9.439.1.2.6

ccmeEphoneAct

1.3.6.1.4.1.9.9.439.1.2.6.1

ccmeEphoneDeviceName

1.3.6.1.4.1.9.9.439.1.2.6.1.1

ccmeEphoneRegState

1.3.6.1.4.1.9.9.439.1.2.6.1.2

ccmeEphoneActiveDN

1.3.6.1.4.1.9.9.439.1.2.6.1.3

ccmeEphoneActivityStatus

1.3.6.1.4.1.9.9.439.1.2.6.1.4

ccmeEphoneKeepAliveCnt

1.3.6.1.4.1.9.9.439.1.2.6.1.5

ccmeEphonePendingReset

1.3.6.1.4.1.9.9.439.1.2.6.1.6

ccmeEphoneRegTime

1.3.6.1.4.1.9.9.439.1.2.6.1.7

ccmeEphoneCurrentFirmwareRev

1.3.6.1.4.1.9.9.439.1.2.6.1.8

ccmeEphonePreviousFirmwareRev

1.3.6.1.4.1.9.9.439.1.2.6.1.9

ccmeEphoneLastError

1.3.6.1.4.1.9.9.439.1.2.6.1.10

ccmeEphoneObservedType

1.3.6.1.4.1.9.9.439.1.2.6.1.11

ccmeEphoneLoginStatus

1.3.6.1.4.1.9.9.439.1.2.6.1.12

ccmeEphoneDnDStatus

1.3.6.1.4.1.9.9.439.1.2.6.1.13

ccmeEphoneDebugStatus

1.3.6.1.4.1.9.9.439.1.2.6.1.14

ccmeEphoneMediaActive

1.3.6.1.4.1.9.9.439.1.2.6.1.15

ccmeEphoneTAPIClient

1.3.6.1.4.1.9.9.439.1.2.6.1.16

ccmeEphoneMediaCapability

1.3.6.1.4.1.9.9.439.1.2.6.1.17

ccmeEphoneRemote

1.3.6.1.4.1.9.9.439.1.2.6.1.18

ccmeMohSource

1.3.6.1.4.1.9.9.439.1.2.7

ccmeNightServiceEnabled

1.3.6.1.4.1.9.9.439.1.2.8

ccmeHistoryStats

1.3.6.1.4.1.9.9.439.1.3

ccmeEphoneDnChStatsHistoryTable

1.3.6.1.4.1.9.9.439.1.3.1

ccmeEphoneDnChStatsHistory

1.3.6.1.4.1.9.9.439.1.3.1.1

ccmeEphoneDnChNum

1.3.6.1.4.1.9.9.439.1.3.1.1.1

ccmeEphoneDnChIncoming

1.3.6.1.4.1.9.9.439.1.3.1.1.2

ccmeEphoneDnChInAnswered

1.3.6.1.4.1.9.9.439.1.3.1.1.3

ccmeEphoneDnChOutbound

1.3.6.1.4.1.9.9.439.1.3.1.1.4

ccmeEphoneDnChOutAnswered

1.3.6.1.4.1.9.9.439.1.3.1.1.5

ccmeEphoneDnChOutBusy

1.3.6.1.4.1.9.9.439.1.3.1.1.6

ccmeEphoneDnChDiscAtConn

1.3.6.1.4.1.9.9.439.1.3.1.1.7

ccmeEphoneDnChDiscAtAlert

1.3.6.1.4.1.9.9.439.1.3.1.1.8

ccmeEphoneDnChDiscAtHold

1.3.6.1.4.1.9.9.439.1.3.1.1.9

ccmeEphoneDnChDiscAtRing

1.3.6.1.4.1.9.9.439.1.3.1.1.10

ccmeEphoneDnChDiscCauseNearEnd

1.3.6.1.4.1.9.9.439.1.3.1.1.11

ccmeEphoneDnChDiscCauseFarEnd

1.3.6.1.4.1.9.9.439.1.3.1.1.12


Correlation of Tables

The CISCO-CCME-MIB contains the tables listed in Table 11 through Table 28.

Table 11 ccmePhoneFirmware Table 

Object Name
Object ID

ccmePhoneFirmwareTable

1.3.6.1.4.1.9.9.439.1.1.23

ccmePhoneFirmware

1.3.6.1.4.1.9.9.439.1.1.23.1

ccmePhoneFirmwareIndex

1.3.6.1.4.1.9.9.439.1.1.23.1.1

ccmePhoneType

1.3.6.1.4.1.9.9.439.1.1.23.1.2

ccmePhoneFirmwareRev

1.3.6.1.4.1.9.9.439.1.1.23.1.3


Table 12 ccmeTransferPattern Table 

Object Name
Object ID

ccmeTransferPatternTable

1.3.6.1.4.1.9.9.439.1.1.24

ccmeTransferPattern

1.3.6.1.4.1.9.9.439.1.1.24.1

ccmeTransferPatternIndex

1.3.6.1.4.1.9.9.439.1.1.24.1.1

ccmeTransferPattern

1.3.6.1.4.1.9.9.439.1.1.24.1.2

ccmeTransferPatternType

1.3.6.1.4.1.9.9.439.1.1.24.1.3


Table 13 ccmeAfterHrsBlockPattern Table 

Object Name
Object ID

ccmeAfterHrsBlockPatternTable

1.3.6.1.4.1.9.9.439.1.1.27

ccmeAfterHrsBlockPattern

1.3.6.1.4.1.9.9.439.1.1.27.1

ccmeAfterHrsBlockPatternTag

1.3.6.1.4.1.9.9.439.1.1.27.1.1

ccmeAfterHrsBlockPattern

1.3.6.1.4.1.9.9.439.1.1.27.1.2

ccmeAfterHrsBlockPatternAllTime

1.3.6.1.4.1.9.9.439.1.1.27.1.3


Table 14 ccmeAfterHrsBlockDate Table 

Object Name
Object ID

ccmeAfterHrsBlockDateTable

1.3.6.1.4.1.9.9.439.1.1.28

ccmeAfterHrsBlockDate

1.3.6.1.4.1.9.9.439.1.1.28.1

ccmeAfterHrsBlockDateIndex

1.3.6.1.4.1.9.9.439.1.1.28.1.1

ccmeAfterHrsBlockDateMonth

1.3.6.1.4.1.9.9.439.1.1.28.1.2

ccmeAfterHrsBlockDate

1.3.6.1.4.1.9.9.439.1.1.28.1.3

ccmeAfterHrsBlockDateStartHour

1.3.6.1.4.1.9.9.439.1.1.28.1.4

ccmeAfterHrsBlockDateStartMin

1.3.6.1.4.1.9.9.439.1.1.28.1.5

ccmeAfterHrsBlockDateStopHour

1.3.6.1.4.1.9.9.439.1.1.28.1.6

ccmeAfterHrsBlockDateStopMin

1.3.6.1.4.1.9.9.439.1.1.28.1.7


Table 15 ccmeAfterHrsBlockDay Table 

Object Name
Object ID

ccmeAfterHrsBlockDayTable

1.3.6.1.4.1.9.9.439.1.1.29

ccmeAfterHrsBlockDay

1.3.6.1.4.1.9.9.439.1.1.29.1

ccmeAfterHrsBlockDayIndex

1.3.6.1.4.1.9.9.439.1.1.29.1.1

ccmeAfterHrsBlockDay

1.3.6.1.4.1.9.9.439.1.1.29.1.2

ccmeAfterHrsBlockDayStartHour

1.3.6.1.4.1.9.9.439.1.1.29.1.3

ccmeAfterHrsBlockDayStartMin

1.3.6.1.4.1.9.9.439.1.1.29.1.4

ccmeAfterHrsBlockDayStopHour

1.3.6.1.4.1.9.9.439.1.1.29.1.5

ccmeAfterHrsBlockDayStopMin

1.3.6.1.4.1.9.9.439.1.1.29.1.6


Table 16 ccmeNightServiceDate Table 

Object Name
Object ID

ccmeNightServiceDateTable

1.3.6.1.4.1.9.9.439.1.1.31

ccmeNightServiceDate

1.3.6.1.4.1.9.9.439.1.1.31.1

ccmeNightServiceDateIndex

1.3.6.1.4.1.9.9.439.1.1.31.1.1

ccmeNightServiceDateMonth

1.3.6.1.4.1.9.9.439.1.1.31.1.2

ccmeNightServiceDate

1.3.6.1.4.1.9.9.439.1.1.31.1.3

ccmeNightServiceDateStartHour

1.3.6.1.4.1.9.9.439.1.1.31.1.4

ccmeNightServiceDateStartMin

1.3.6.1.4.1.9.9.439.1.1.31.1.5

ccmeNightServiceDateStopHour

1.3.6.1.4.1.9.9.439.1.1.31.1.6

ccmeNightServiceDateStopMin

1.3.6.1.4.1.9.9.439.1.1.31.1.7


Table 17 ccmeNightServiceDay Table 

Object Name
Object ID

ccmeNightServiceDayTable

1.3.6.1.4.1.9.9.439.1.1.32

ccmeNightServiceDay

1.3.6.1.4.1.9.9.439.1.1.32.1

ccmeNightServiceDayIndex

1.3.6.1.4.1.9.9.439.1.1.32.1.1

ccmeNightServiceDay

1.3.6.1.4.1.9.9.439.1.1.32.1.2

ccmeNightServiceDayStartHour

1.3.6.1.4.1.9.9.439.1.1.32.1.3

ccmeNightServiceDayStartMin

1.3.6.1.4.1.9.9.439.1.1.32.1.4

ccmeNightServiceDayStopHour

1.3.6.1.4.1.9.9.439.1.1.32.1.5

ccmeNightServiceDayStopMin

1.3.6.1.4.1.9.9.439.1.1.32.1.6


Table 18 ccmeDialplanPattern Table 

Object Name
Object ID

ccmeDialplanPatternTable

1.3.6.1.4.1.9.9.439.1.1.38

ccmeDialplanPattern

1.3.6.1.4.1.9.9.439.1.1.38.1

ccmeDialplanPatternIndex

1.3.6.1.4.1.9.9.439.1.1.38.1.1

ccmeDialplanPatternTag

1.3.6.1.4.1.9.9.439.1.1.38.1.2

ccmeDialplanExtLength

1.3.6.1.4.1.9.9.439.1.1.38.1.3

ccmeDialplanPattern

1.3.6.1.4.1.9.9.439.1.1.38.1.4

ccmeDialplanExtPattern

1.3.6.1.4.1.9.9.439.1.1.38.1.5

ccmeDialplanAllowRegiEnabled

1.3.6.1.4.1.9.9.439.1.1.38.1.6


Table 19 ccmeEphoneConf Table 

Object Name
Object ID

ccmeEphoneConfTable

1.3.6.1.4.1.9.9.439.1.1.43

ccmeEphoneConf

1.3.6.1.4.1.9.9.439.1.1.43.1

ccmeEphoneTag

1.3.6.1.4.1.9.9.439.1.1.43.1.1

ccmeEphoneIpAddressType

1.3.6.1.4.1.9.9.439.1.1.43.1.2

ccmeEphoneIpAddress

1.3.6.1.4.1.9.9.439.1.1.43.1.3

ccmeEphoneMacAddress

1.3.6.1.4.1.9.9.439.1.1.43.1.4

ccmeEphoneModel

1.3.6.1.4.1.9.9.439.1.1.43.1.5

ccmeEphoneUsername

1.3.6.1.4.1.9.9.439.1.1.43.1.6

ccmeEphoneKeepAlive

1.3.6.1.4.1.9.9.439.1.1.43.1.7

ccmeEphoneAutoLineOut

1.3.6.1.4.1.9.9.439.1.1.43.1.8

ccmeEphonePagingDn

1.3.6.1.4.1.9.9.439.1.1.43.1.9

ccmeEphoneAddon

1.3.6.1.4.1.9.9.439.1.1.43.1.10

ccmeEphoneTemplate

1.3.6.1.4.1.9.9.439.1.1.43.1.11

ccmeEphonePagingPolicy

1.3.6.1.4.1.9.9.439.1.1.43.1.12

ccmeEphoneKeyPhone

1.3.6.1.4.1.9.9.439.1.1.43.1.13

ccmeEphoneAutoLineInEnabled

1.3.6.1.4.1.9.9.439.1.1.43.1.14

ccmeEphoneAftHrsBlkExmptEnabled

1.3.6.1.4.1.9.9.439.1.1.43.1.15

ccmeEphoneNightBellSvcEnabled

1.3.6.1.4.1.9.9.439.1.1.43.1.16

ccmeEphoneKeepConfEnabled

1.3.6.1.4.1.9.9.439.1.1.43.1.17


Table 20 ccmeEphoneSpeedDialConf Table 

Object Name
Object ID

ccmeEphoneSpeedDialConfTable

1.3.6.1.4.1.9.9.439.1.1.44

ccmeEphoneSpeedDialConf

1.3.6.1.4.1.9.9.439.1.1.44.1

ccmeEphoneSpeedDialTableIndex

1.3.6.1.4.1.9.9.439.1.1.44.1.1

ccmeEphoneSpeedDialTag

1.3.6.1.4.1.9.9.439.1.1.44.1.2

ccmeEphoneSpeedDialNumber

1.3.6.1.4.1.9.9.439.1.1.44.1.3

ccmeEphoneSpeedDialLabel

1.3.6.1.4.1.9.9.439.1.1.44.1.4


Table 21 ccmeEphoneFastDialConf Table 

Object Name
Object ID

ccmeEphoneFastDialConfTable

1.3.6.1.4.1.9.9.439.1.1.45

ccmeEphoneFastDialConf

1.3.6.1.4.1.9.9.439.1.1.45.1

ccmeEphoneFastDialTableIndex

1.3.6.1.4.1.9.9.439.1.1.45.1.1

ccmeEphoneFastDialNumber

1.3.6.1.4.1.9.9.439.1.1.45.1.2

ccmeEphoneFastDialName

1.3.6.1.4.1.9.9.439.1.1.45.1.3


Table 22 ccmeEphoneBtnDNAssocConf Table 

Object Name
Object ID

ccmeEphoneBtnDNAssocConfTable

1.3.6.1.4.1.9.9.439.1.1.46

ccmeEphoneBtnDNAssocConf

1.3.6.1.4.1.9.9.439.1.1.46.1

ccmeEphoneButtonNumber

1.3.6.1.4.1.9.9.439.1.1.46.1.1

ccmeEphoneOverlayDN

1.3.6.1.4.1.9.9.439.1.1.46.1.2


Table 23 ccmeEphoneDNConfig Table 

Object Name
Object ID

ccmeEphoneDnConfigTable

1.3.6.1.4.1.9.9.439.1.1.47

ccmeEphoneDnConfig

1.3.6.1.4.1.9.9.439.1.1.47.1

ccmeEphoneDnTag

1.3.6.1.4.1.9.9.439.1.1.47.1.1

ccmeEphoneDnType

1.3.6.1.4.1.9.9.439.1.1.47.1.2

ccmeEphoneDnMode

1.3.6.1.4.1.9.9.439.1.1.47.1.3

ccmeEphoneDnPriNum

1.3.6.1.4.1.9.9.439.1.1.47.1.4

ccmeEphoneDnSecNum

1.3.6.1.4.1.9.9.439.1.1.47.1.5

ccmeEphoneDnName

1.3.6.1.4.1.9.9.439.1.1.47.1.6

ccmeEphoneDnLabel

1.3.6.1.4.1.9.9.439.1.1.47.1.7

ccmeEphoneDnPriPref

1.3.6.1.4.1.9.9.439.1.1.47.1.8

ccmeEphoneDnSecPref

1.3.6.1.4.1.9.9.439.1.1.47.1.9

ccmeEphoneDnCFBusyNum

1.3.6.1.4.1.9.9.439.1.1.47.1.10

ccmeEphoneDnCFAllNum

1.3.6.1.4.1.9.9.439.1.1.47.1.11

ccmeEphoneDnCFNoAnNum

1.3.6.1.4.1.9.9.439.1.1.47.1.12

ccmeEphoneDnCFNoAnTo

1.3.6.1.4.1.9.9.439.1.1.47.1.13

ccmeEphoneDnMwiCapability

1.3.6.1.4.1.9.9.439.1.1.47.1.14

ccmeEphoneDnHuntstop

1.3.6.1.4.1.9.9.439.1.1.47.1.15

ccmeEphoneDnHuntstopCh

1.3.6.1.4.1.9.9.439.1.1.47.1.16

ccmeEphoneDnHoldAltTo

1.3.6.1.4.1.9.9.439.1.1.47.1.17

ccmeEphoneDnHoldAltType

1.3.6.1.4.1.9.9.439.1.1.47.1.18

ccmeEphoneDnMwiSipSubscrEnabled

1.3.6.1.4.1.9.9.439.1.1.47.1.19

ccmeEphoneDnScriptName

1.3.6.1.4.1.9.9.439.1.1.47.1.20


{

Table 24 ccmeCorConf Table 

Object Name
Object ID

ccmeCorConfTable

1.3.6.1.4.1.9.9.439.1.1.60

ccmeCorConf

1.3.6.1.4.1.9.9.439.1.1.60.1

ccmeCorTableIndex

1.3.6.1.4.1.9.9.439.1.1.60.1.1

ccmeCorTag

1.3.6.1.4.1.9.9.439.1.1.60.1.2

ccmeCorListName

1.3.6.1.4.1.9.9.439.1.1.60.1.3

ccmeCorScope

1.3.6.1.4.1.9.9.439.1.1.60.1.4

ccmeCorDirection

1.3.6.1.4.1.9.9.439.1.1.60.1.5

ccmeCorStartingNumber

1.3.6.1.4.1.9.9.439.1.1.60.1.6

ccmeCorEndingNumber

1.3.6.1.4.1.9.9.439.1.1.60.1.7

ccmeCorVoiceRegPoolNumber

1.3.6.1.4.1.9.9.439.1.1.60.1.8

ccmeCorListDefaultEnabled

1.3.6.1.4.1.9.9.439.1.1.60.1.9


{

Table 25 ccmeLoopbackDnConf Table 

Object Name
Object ID

ccmeLoopbackDnConfTable

1.3.6.1.4.1.9.9.439.1.1.61

ccmeLoopbackDnConf

1.3.6.1.4.1.9.9.439.1.1.61.1

ccmeLoopbackDnTag

1.3.6.1.4.1.9.9.439.1.1.61.1.1

ccmeLoopbackDnforward

1.3.6.1.4.1.9.9.439.1.1.61.1.2

ccmeLoopbackDnStrip

1.3.6.1.4.1.9.9.439.1.1.61.1.3

ccmeLoopbackDnPrefix

1.3.6.1.4.1.9.9.439.1.1.61.1.4

ccmeLoopbackDnSuffix

1.3.6.1.4.1.9.9.439.1.1.61.1.5

ccmeLoopbackDnRetryTo

1.3.6.1.4.1.9.9.439.1.1.61.1.6

ccmeLoopbackDnAutoCon

1.3.6.1.4.1.9.9.439.1.1.61.1.7

ccmeLoopbackDnCodec

1.3.6.1.4.1.9.9.439.1.1.61.1.8


{

Table 26 ccmeIntercomDnConf Table 

Object Name
Object ID

ccmeIntercomDnConfTable

1.3.6.1.4.1.9.9.439.1.1.62

ccmeIntercomDnConf

1.3.6.1.4.1.9.9.439.1.1.62.1

ccmeIntercomDnTag

1.3.6.1.4.1.9.9.439.1.1.62.1.1

ccmeIntercomDnExtensionNum

1.3.6.1.4.1.9.9.439.1.1.62.1.2

ccmeIntercomDnBargeInEnabled

1.3.6.1.4.1.9.9.439.1.1.62.1.3

ccmeIntercomDnAutoAnsEnabled

1.3.6.1.4.1.9.9.439.1.1.62.1.4

ccmeIntercomDnLabel

1.3.6.1.4.1.9.9.439.1.1.62.1.5


{

Table 27 ccmeEphoneAct Table 

Object Name
Object ID

ccmeEphoneActTable

1.3.6.1.4.1.9.9.439.1.2.6

ccmeEphoneAct

1.3.6.1.4.1.9.9.439.1.2.6.1

ccmeEphoneDeviceName

1.3.6.1.4.1.9.9.439.1.2.6.1.1

ccmeEphoneRegState

1.3.6.1.4.1.9.9.439.1.2.6.1.2

ccmeEphoneActiveDN

1.3.6.1.4.1.9.9.439.1.2.6.1.3

ccmeEphoneActivityStatus

1.3.6.1.4.1.9.9.439.1.2.6.1.4

ccmeEphoneKeepAliveCnt

1.3.6.1.4.1.9.9.439.1.2.6.1.5

ccmeEphonePendingReset

1.3.6.1.4.1.9.9.439.1.2.6.1.6

ccmeEphoneRegTime

1.3.6.1.4.1.9.9.439.1.2.6.1.7

ccmeEphoneCurrentFirmwareRev

1.3.6.1.4.1.9.9.439.1.2.6.1.8

ccmeEphonePreviousFirmwareRev

1.3.6.1.4.1.9.9.439.1.2.6.1.9

ccmeEphoneLastError

1.3.6.1.4.1.9.9.439.1.2.6.1.10

ccmeEphoneObservedType

1.3.6.1.4.1.9.9.439.1.2.6.1.11

ccmeEphoneLoginStatus

1.3.6.1.4.1.9.9.439.1.2.6.1.12

ccmeEphoneDnDStatus

1.3.6.1.4.1.9.9.439.1.2.6.1.13

ccmeEphoneDebugStatus

1.3.6.1.4.1.9.9.439.1.2.6.1.14

ccmeEphoneMediaActive

1.3.6.1.4.1.9.9.439.1.2.6.1.15

ccmeEphoneTAPIClient

1.3.6.1.4.1.9.9.439.1.2.6.1.16

ccmeEphoneMediaCapability

1.3.6.1.4.1.9.9.439.1.2.6.1.17

ccmeEphoneRemote

1.3.6.1.4.1.9.9.439.1.2.6.1.18


{

Table 28 ccmeEphoneDnChStatsHistory Table 

Object Name
Object ID

ccmeEphoneDnChStatsHistoryTable

1.3.6.1.4.1.9.9.439.1.3.1

ccmeEphoneDnChStatsHistory

1.3.6.1.4.1.9.9.439.1.3.1.1

ccmeEphoneDnChNum

1.3.6.1.4.1.9.9.439.1.3.1.1.1

ccmeEphoneDnChIncoming

1.3.6.1.4.1.9.9.439.1.3.1.1.2

ccmeEphoneDnChInAnswered

1.3.6.1.4.1.9.9.439.1.3.1.1.3

ccmeEphoneDnChOutbound

1.3.6.1.4.1.9.9.439.1.3.1.1.4

ccmeEphoneDnChOutAnswered

1.3.6.1.4.1.9.9.439.1.3.1.1.5

ccmeEphoneDnChOutBusy

1.3.6.1.4.1.9.9.439.1.3.1.1.6

ccmeEphoneDnChDiscAtConn

1.3.6.1.4.1.9.9.439.1.3.1.1.7

ccmeEphoneDnChDiscAtAlert

1.3.6.1.4.1.9.9.439.1.3.1.1.8

ccmeEphoneDnChDiscAtHold

1.3.6.1.4.1.9.9.439.1.3.1.1.9

ccmeEphoneDnChDiscAtRing

1.3.6.1.4.1.9.9.439.1.3.1.1.10

ccmeEphoneDnChDiscCauseNearEnd

1.3.6.1.4.1.9.9.439.1.3.1.1.11

ccmeEphoneDnChDiscCauseFarEnd

1.3.6.1.4.1.9.9.439.1.3.1.1.12


Cisco CME Traps and Notifications

Cisco CME SNMP traps are unsolicited notifications of an unusual or a catastrophic system event sent to the system administrator.

Traps are sent for the following scenarios:

ccmeStatusChangeNotif

ccmeEphoneUnRegThresholdExceed

ccmeEPhoneDeceased

ccmeEPhoneRegFailed

ccmeEphoneLoginFailed

ccmeNightServiceChangeNotif

ccmeLivefeedMohFailedNotif

ccmeMaxConferenceNotif

ccmeKeyEphoneRegChangeNotif


Note Traps are sent by modem or by ISDN dial-backup links to a secondary NMS when the primary links are down (this is done through the configuration in Cisco CME router).


Notifications are asynchronously generated by Cisco CME to pass information about certain device status changes. Table 29 through Table 36 list and describe these notifications.

Table 29 ccmeStatusChangeNotif 

ccmeSysNotificationReason
ccmeSysTrapSeverity
Corrective Action

CCME shutdown

Major

 

Skinny server initialization failed—Socket initialization failed

Major

 

Skinny server initialization failed—not enough memory

Major

 

CCME started successfully

Clear

 

Table 30 ccmeNightServiceChangeNotif 

ccmeEphoneTrapReason
Corrective Action

Night service activated for Ephone <ephone-tag>

None


Table 31 ccmeLivefeedMohFailedNotif 

ccmeEphoneTrapReason
Corrective Action

Music-on-Hold live feed failed

None

Music-on-Hold live feed terminated on DN <ephone-DN tag>

None


Table 32 ccmeNightServiceChangeNotif 

ccmeEphoneTrapReason
Corrective Action

Night service activated for ephone <ephone-tag>

None


Table 33 ccmeMaxConferenceNotif 

ccmeEphoneTrapReason
Corrective Action

Maximum number of supported conferences reached

None


Table 34 ccmeEPhoneRegFailed 

ccmeEphoneTrapReason
Corrective Action

Ephone associate failed: maximum phone count exceeded on socket

None


Table 35 ccmeEphoneLoginFailed 

ccmeEphoneTrapReason
Corrective Action

Ephone user login failed

None


Table 36 Generic Traps 

ccmeEphoneTrap Name
Corrective Action

ccmeEphoneUnRegThresholdExceed

None

ccmeEPhoneDeceased

None

ccmeKeyEphoneRegChangeNotif

None


Additional References

The following sections provide references related to Cisco CME SNMP MIB Support.

Related Documents

Related Topic
Document Title

Configuring an SNMP server for use with a MIB

"Configuring SNMP Support" chapter of the Cisco IOS Configuration Fundamentals and Network Management Configuration Guide at http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/ffun_c/fcfprt3/fcf014.htm

Configuring Cisco CME

Cisco CME System Administration Guide at the following URLs:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html

Configuring Cisco IP phones (ephones) and ephone-dns on the router

Cisco CME documents listed at http://www.cisco.com/en/US/partner/products/sw/voicesw/ps4625/products_documentation_roadmap09186a0080189132.html)

MIBs that Cisco implements

Start at ftp-eng.cisco.com with ftp://ftp-eng.cisco.com/pub/mibs/README


MIBs

MIB
MIBs Link

CISCO-CCM-MIB

CISCO-CCME-MIB

CISCO-VOICE-DIAL-CONTROL-MIB

To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:

http://www.cisco.com/go/mibs


RFCs

RFC
Title

RFC 826

Ethernet Address Resolution Protocol: Or converting network protocol addresses to 48.bit Ethernet address for transmission on Ethernet hardware

RFC 1212

Concise MIB definitions

RFC 1213

Management Information Base for Network Management of TCP/IP-based Internets: MIB-II

RFC 1573

Evolution of the Interfaces Group of MIB-II

RFC 1902

Structure of Management Information for Version 2 of the Simple Network Management Protocol (SNMPv2)

RFC 1904

Conformance Statements for Version 2 of the Simple Network Management Protocol (SNMPv2)


Technical Assistance

Description
Link

The Cisco Technical Support & Documentation website contains thousands of pages of searchable technical content, including links to products, technologies, solutions, technical tips, and tools. Registered Cisco.com users can log in from this page to access even more content.

http://www.cisco.com/techsupport


Glossary

ARP—Address Resolution Protocol. Internet protocol used to map an IP address to a MAC address. Defined in RFC 826.

ATA—Analog telephone adaptor.

BRI—Basic Rate Interface. ISDN interface composed of two B channels and one D channel for circuit-switched communication of voice, video, and data.

COR—Class of restriction. Functionality that provides the capability to deny certain call attempts based on the incoming and outgoing class of restrictions provisioned on the dial peers. This functionality provides flexibility in network design, allows users to block calls (for example, to 900 numbers), and applies different restrictions to call attempts from different originators. COR specifies which incoming dial peer can use which outgoing dial peer to make a call.

DN—Dialed number. Number that a caller dialed to initiate a call; for example, 800-555-1212.

Ephone—Ethernet phone. Phone that operates in an IP-telephony environment.

FXO—Foreign-exchange office. An FXO interface connects to the PSTN central office and is the interface offered on a standard telephone. Cisco's FXO interface is an RJ-11 connector that allows an analog connection at the PSTN central office or to a station interface on a PBX.

IETF—Internet Engineering Task Force. Task force consisting of over 80 working groups responsible for developing Internet standards. The IETF operates under the auspices of ISOC.

IVR—Interactive voice response. Term used to describe systems that provide information in the form of recorded messages over telephone lines in response to user input in the form of spoken words or, more commonly, DTMF signaling. Examples include banks that allow you to check your balance from any telephone and automated stock quote systems.

LAN—Local area network. High-speed, low-error data network covering a relatively small geographic area (up to a few thousand meters). LANs connect workstations, peripherals, terminals, and other devices in a single building or other geographically limited area. LAN standards specify cabling and signaling at the physical and data link layers of the OSI model. Ethernet, FDDI, and Token Ring are widely used LAN technologies.

MIB—Management information base. Database of network management information that is used and maintained by a network management protocol, such as SNMP or CMIP. The value of a MIB object can be changed or retrieved using SNMP or CMIP commands, usually through a GUI network management system. MIB objects are organized in a tree structure that includes public (standard) and private (proprietary) branches.

MOH—Music on hold. Music that plays while a user is on hold.

MWI—Message-waiting indicator. Usually an audio or visual signal that a voice-mail or other type of message is waiting.

NMS—Network management system. System responsible for managing at least part of a network. An NMS is generally a reasonably powerful and well-equipped computer, such as an engineering workstation. NMSs communicate with agents to help keep track of network statistics and resources.

PLAR—Private line, automatic ringdown. Leased voice circuit that connects two single endpoints together. When either telephone handset is taken off-hook, the remote telephone automatically rings.

PRI—Primary Rate Interface. ISDN interface to primary rate access. Primary rate access consists of a single 64-kbps D channel plus 23 (T1) or 30 (E1) B channels for voice or data.

RFC—Request for comment. Document series used as the primary means for communicating information about the Internet. Some RFCs are designated by the IAB as Internet standards. Most RFCs document protocol specifications, such as Telnet and FTP, but some are humorous or historical. RFCs are available online from numerous sources.

SCCP—Skinny Call Control Protocol. Proprietary protocol used between Cisco CallManager and Cisco VoIP ephones.

SIP—Session Initiation Protocol. Protocol developed by the IETF MMUSIC Working Group as an alternative to H.323. SIP equips platforms to signal the setup of voice and multimedia calls over IP networks.

SNMP—Simple Network Management Protocol. Network-management protocol used almost exclusively in TCP/IP networks. SNMP provides a means to monitor and control network devices and to manage configurations, statistics collection, performance, and security.

SRST—Survivable Remote Site Telephony. Critical component of a centralized call-processing architecture in which a Cisco CallManager cluster and application servers at a central site provide telephony services for all sites of a corporation. With tens of thousands of sites deployed, this architecture now represents the majority of IP telephony deployments because of the many benefits it delivers.

Tcl—Tool Command Language. An interpreted scripting language for enabling systems to collect user input in response to recorded messages over telephone lines.


Note See Internetworking Terms and Acronyms for terms not included in this glossary.


Feature Information for Cisco CME SNMP MIB Support

Table 37 lists the release history for this feature.

Not all commands may be available in your Cisco IOS software release. For release information about a specific command, see the command-reference documentation.

Cisco IOS software images are specific to a Cisco IOS software release, a feature set, and a platform. Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear.


Note Table 37 lists only the Cisco IOS software release that introduced support for a given feature in a given Cisco IOS software release train. Unless noted otherwise, subsequent releases of that Cisco IOS software release train also support that feature.


Table 37 Feature Information for Cisco SNMP MIB Support 

Feature Name
Cisco IOS Release
Cisco CME Version
Feature Information

Cisco CME SNMP MIB Support

12.4(4)T

3.4

This feature provides support for the CISCO-CCME-MIB.

With Cisco IOS Release 12.3(4)T and Cisco CME 3.4, this feature was introduced.