Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
Carrier Selection Profiles Settings
Downloads: This chapterpdf (PDF - 330.0KB) The complete bookPDF (PDF - 5.69MB) | Feedback

Carrier Selection Profiles Settings

Carrier Selection Profiles Settings

This chapter is applicable to Cisco Business Edition 3000 if you have installed a Brazil country pack using the Cisco Business Edition 3000 First Time Setup Wizard. The Carrier Selection Profiles page allows you to configure the carrier selection codes for Brazil on the Cisco Business Edition 3000 server. Table 1 describes the settings on the Carrier Selection Profiles page (Connections > Carrier Selection Profiles). Click Carrier Selection Profiles to view the existing profiles that are configured for use in Brazil with the Cisco Business Edition 3000.

Table 1 Settings on the Carrier Selection Profiles Page

Settings

Description

Name

Specifies the name of the Carrier Selection Profile.

Description

Specifies the description of the Carrier Selection Profile.

Select Codes

Specifies the selection codes that are configured for this profile. The order of the code appears as follows:

  1. Long Distance Fixed code
  2. Long Distance Mobile code
  3. International code
Note    If the code for some category is not configured, the comma separated list will show ‘ – ’ in that space.

PSTN Connections

Specifies the number of PSTN connections associated with this Carrier Selection Profile.

Edit

Click the Edit link corresponding to the Carrier Selection Profile to edit the configuration settings.

Delete

Click the Delete link corresponding to the Carrier Selection Profile to delete the Carrier Selection Profile.

A confirmation message appears. Click Delete to delete or Cancel to retain the profile.

Add Carrier Selection Profile

Click to add a new Carrier Selection Profile.

Edit/Add Carrier Selection Profile

General Information

Name

Enter the name for the Carrier Selection Profile.

Description

Enter the description for the corresponding Carrier Selection Profile.

Carrier Select Codes Information

Long Distance Fixed

Enter the carrier selection code to place long distance fixed calls.

Note    Carrier selection code must contain a maximum of 2 digits only.

Long Distance Mobile

Enter the carrier selection code to place long distance mobile calls.

Note    Carrier selection code must contain a maximum of 2 digits only.

International

Enter the carrier selection code for long distance international calls.

Note    Carrier selection code must contain a maximum of 2 digits only.

PSTN Connections

This option allows you to choose from a list of PSTN connections that are available on the Cisco Business Edition 3000 to associate with the Carrier Selection Profile.

Add

Select the PSTN connection from the Available list and click Add to associate the Carrier Selection Profile with the PSTN connection.

Note    A PSTN connection can be associated with only one Carrier Selection Profile.

Click OK to configure the Carrier Selection Profile. Click Cancel to cancel the configuration.

Remove

Select the PSTN connection from the Selected list and click Remove to remove the association of the Carrier Selection Profile with the PSTN connection.

Save

To save the configuration for the Carrier Selection Profile, click Save.

Reset

To discard your changes or reset the configuration, click Reset.