Administration Guide for Cisco Business Edition 3000, Release 8.6(3)
Music On Hold Settings
Downloads: This chapterpdf (PDF - 325.0KB) The complete bookPDF (PDF - 4.91MB) | Feedback

Music On Hold Settings

Music On Hold Settings

GUI: Cisco Business Edition 3000 Administrative Interface

The music on hold feature plays music to users when they are put on hold. Music on hold audio source files must meet the following specifications:

  • 16-bit PCM .wav file
  • Stereo or mono
  • Sample rates of 48 kHz, 44.1 kHz, 32 kHz, 16 kHz, or 8 kHz

For information on tasks that are performed to set up music on hold, see the Music On Hold.


Tip


Uploading a new audio source file replaces the current file on the system.


The following table describes the settings on the Music On Hold page where you can upload music on hold audio source files (System Settings > Music On Hold).

Table 1 Settings on the Music On Hold page

Setting

Description

Uploaded Audio Source

This link displays the name of the music on hold file that is currently installed. The default file that is installed is SampleAudioSource.

To listen to the audio source file, click the link and download the file to your desktop.

Upload from Desktop

To upload an audio source file from your desktop, click Upload from Desktop and browse to the location of the file.

Copy from System USB Port

To upload an audio source file from a system USB port, click Copy from System USB Port and browse to the location of the file. Ensure that the USB flash drive is put in the port on the server before you copy the file.

Upload

To upload the file to the server, click Upload.

Cancel

If you do not want to upload the file, click Cancel.