Cisco Unified TAPI Developers Guide for Cisco Unified Communications Manager Release 7.1(2)
New and Changed Information
Downloads: This chapterpdf (PDF - 120.0KB) The complete bookPDF (PDF - 9.8MB) | Feedback

New and Changed Information

Table Of Contents

New and Changed Information

Cisco Unified Communications Manager Release 7.1(2)

Features Supported in Previous Releases

Cisco Unified Communications Manager Release 7.0(1)

Cisco Unified Communications Manager Release 6.1(x)

Cisco Unified Communications Manager Release 6.0(1)

Backward Compatibility

Cisco Unified Communications Manager Release 5.1

Cisco Unified Communications Manager Release 5.0

Cisco Unified Communications Manager Release 4.x

Cisco Unified Communications Manager Releases Prior to 4.x


New and Changed Information


This chapter describes new and changed Cisco Unified TAPI Service Provider (TSP) information for Cisco Unified Communications Manager release 7.1.(2) and feature supported in the previous releases. This chapter contains the following sections:

Cisco Unified Communications Manager Release 7.1(2)

Features Supported in Previous Releases

Refer to the programming guides Web site for prior Cisco JTAPI Developer Guides at http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_programming_reference_guides_
list.html
.

Cisco Unified Communications Manager Release 7.1(2)

This section describes new and changed features that are supported in Cisco Unified Communications Manager Release 7.1(2) and contains the following topics:

IPv6 Support—Enables IPv6 capabilities in a Cisco Unified Communications Manager (Unified CM) network. For more information, see IPv6 Support, page 3-2.

Direct Transfer Across Lines Support—Allows the application to directly transfer calls across the lines that are configured on the device. For more information, see Direct Transfer Across Lines Support, page 3-2.

Message Waiting Indicator Enhancement—The Message Waiting Indicator (MWI) feature enchancement enables the application to display the following information on the supported phones. For more information, see Message Waiting Indicator Enhancement, page 3-3.

Swap and Cancel Softkey Support—Swap and Control softkey support has been provided the Cisco Unfied IP Phone 7900 Series. For more information, see Swap and Cancel Softkey Support, page 3-4.

Drop-Any-Party Support—Enables the application to drop any call from the ad-hoc conference. For more information, see Drop-Any-Party Support, page 3-5.

Park Monitoring Support—Allows you to monitor the status of parked calls. For more information, see Park Monitoring Support, page 3-5.

Logical Partitioning Support—Restricts VoIP to PSTN calls and vice versa, based on the logical partitioning policy. For more information, see Logical Partitioning Support, page 3-7.

Support for Cisco Unfied IP Phone 6900 Series—a new user group called Standard allow CTI control devices with roll-over mode is created. When a user is added to the new user group, the TSP applications monitor and control the Cisco Unfied IP Phone 6900 series and Cisco Unfied IP Phone 7931 with roll-over mode. For more information, see Support for Cisco Unfied IP Phone 6900 Series, page 3-7.

The following Attendant Console versions are supported in Cisco TSP 7.1(2):

Cisco Unified Department Attendant Console release 2.0.x, 3.1.x, 8.0.x

Cisco Unified Business Attendant Console 2.0.x, 3.1.x, 8.0.x

Cisco Unified Enterprise Attendant Console 3.1.x, 8.0.x

Arc Enterprise 4.x, 5.x

Arc Enterprise Premium 4.x, 5.x

Arc Call Connect 4.x, 5.x

Features Supported in Previous Releases

This section describes the features supported in the releases prior to 7.1(2) and contains the following

sections:

Cisco Unified Communications Manager Release 7.0(1)

Cisco Unified Communications Manager Release 6.1(x)

Cisco Unified Communications Manager Release 6.0(1)

Cisco Unified Communications Manager Release 5.1

Cisco Unified Communications Manager Release 5.0

Cisco Unified Communications Manager Release 4.x

Cisco Unified Communications Manager Releases Prior to 4.x

Cisco Unified Communications Manager Release 7.0(1)

This section describes new and changed features supported in Cisco Unified Communications Manager Release 7.0(1) and contains the following:

Join Across Lines (SIP), page 3-8

Localization Infrastructure Changes, page 3-8

Do Not Disturb-Reject, page 3-9

Calling Party Normalization, page 3-10

Click to Conference, page 3-10

Microsoft Windows Vista, page 3-10


Note For the features, Join Across Lines, Do Not Disturb-Reject, and Calling Party Normalization, each TAPI application must be upgraded to a version that is compatible with these features. Additionally, if you are upgrading from Release 5.1 and you use Join Across Lines, the Conference Chaining feature must not be enabled or used until all applications are either upgraded to a version compatible with the new CUCM version. Also, you should verify that the applications are not impacted by the Conference Chaining feature.


Cisco Unified Communications Manager Release 6.1(x)

This section describes new and changed features that Cisco Unified Communications Manager Release 6.1(x) supports and contains the following topic:

Join Across Lines (SCCP), page 3-11

Cisco Unified Communications Manager Release 6.0(1)

This section describes new and changed features that are supported in Cisco Unified Communications Manager Release 6.0(1), and contains the following topics:

Intercom Support, page 3-11

Secure Conferencing Support, page 3-12

Do Not Disturb, page 3-13

Conference Enhancements, page 3-14

Arabic and Hebrew Language Support, page 3-15

Additional Features Supported on SIP Phones, page 3-16

Silent Monitoring, page 3-16

Silent Recording, page 3-17

Calling Party IP Address, page 3-18

Backward Compatibility

No backward compatibility issues exist for any features that are introduced in Cisco Unified Communications Manager Release 6.0(1).

Cisco Unified Communications Manager Release 5.1

This section describes new and changed features supported in Cisco Unified Communications Manager, Release 5.1 and contains the following topics:

Partition Support, page 3-18

Alternate Script, page 3-19

Secure RTP, page 3-19

SuperProvider, page 3-20

Refer and Replaces for Phones that are Running SIP, page 3-21

SIP URL Address, page 3-22

3XX, page 3-22

Secure TLS Support, page 3-22

Monitoring Call Park Directory Numbers, page 3-24

Super Provider Support, page 3-24

Cisco Unified Communications Manager Release 5.0

This section describes new and changed features that are supported in Cisco Unified Communications Manager, Release 5.0, and contains the following topics:

Unicode Support, page 3-25

Line-Side Phones That Runs SIP, page 3-25

Cisco Unified Communications Manager Release 4.x

This section describes new and changed features that are supported in Cisco Unified Communications Manager, Release 4.x, and contains the following topics:

Release 4.0

Redirect and Blind Transfer, page 3-26

Direct Transfer, page 3-27

Join, page 3-27

Set the Original Called Party upon Redirect, page 3-28

Cisco Unified TSP Auto Update, page 3-28

Multiple Calls per Line Appearance, page 3-29

Shared Line Appearance, page 3-29

Select Calls, page 3-30

Release 4.1

Forced Authorization Code and Client Matter Code, page 3-30

CTI Port Third-Party Monitoring Port, page 3-31

Translation Pattern, page 3-31

Cisco Unified Communications Manager Releases Prior to 4.x

The chapter includes the following list of all features that are available in the Cisco Unified TSP implementation of Cisco Unified Communications Manager, prior to Release 4.x:

Forwarding, page 3-31

Extension Mobility, page 3-31

Directory Change Notification, page 3-32

Join, page 3-27

Privacy Release, page 3-32

Barge and cBarge, page 3-32

XSI Object Pass Through, page 3-33

Silent Install Support, page 3-33