Cisco Unified Communications Manager Call Detail Records Administration Guide, Release 7.1(2)
Understanding Cisco Call Detail Records
Downloads: This chapterpdf (PDF - 360.0KB) The complete bookPDF (PDF - 2.02MB) | Feedback

Understanding Cisco Call Detail Records

Table Of Contents

Understanding Cisco Call Detail Records

CDR Management

CDR Agent

CDR Repository Manager

CDR onDemand Service

Upgrading Cisco Unified Communications Manager

Backup of CDR Database

Related Topics

Related Documentation


Understanding Cisco Call Detail Records


This chapter describes the format and logic of the call detail records (CDRs) that the Cisco Unified Communications Manager Release 7.0(1) system generates. You can use this information for post-processing activities such as generating billing records and network analysis.

When you install your system, the system enables CDRs by default. Call management records (CMRs) remain disabled by default. You can enable or disable CDRs or CMRs at any time that the system is in operation. You do not need to restart Cisco Unified Communications Manager for the change to take effect. The system responds to all changes within a few seconds. The system enables CMR or diagnostic data separately from CDR data.

This chapter contains the following topics:

CDR Management

Upgrading Cisco Unified Communications Manager

Backup of CDR Database

Related Topics

Related Documentation

CDR Management

The CDR Management (CDRM) feature, a background application, supports the following capabilities:

Collects the CDR/CMR files from the Cisco Unified Communications Manager server or node to the CDR Repository server or node.

Collects and maintains the CDR/CMR files on the server where you configure CAR.

Maintains the CDR/CMR files on the CDR Repository node or CDR server.

Allows third-party applications to retrieve CDR/CMR files on demand through a SOAP interface.

Accepts on-demand requests for searching file names.

Pushes CDR/CMR files from individual nodes within a cluster to the CDR Repository server or node.

Sends CDR/CMR files to up to three customer billing servers via FTP/SFTP.

Monitors disk usage of CDR/CMR files on the server where you configure CAR or on the CDR Repository server or node.

Periodically deletes CDR/CMR files that were successfully delivered. You can configure the amount of storage that is used to store flat files. Predefined storage limits exist. If the storage limits are exceeded, the CDR Repository Manager deletes old files to reduce the disk usage to the preconfigured low water mark. The post-processing applications can later retrieve the buffered historical data to re-get any lost, corrupted, or missing data. The CDRM feature, which is not aware of the flat file format, does not manipulate the file contents.


Note The CDRM feature handles CDR files and CMR files in the same manner.


CDRM comprises two default services, the CDR Agentand the CDR Repository Manager, and one activate service, CDR onDemand Service. The following sections describe these services:

CDR Agent

CDR Repository Manager

CDR onDemand Service

CDR Agent

As part of the CDRM feature, a resident component on the server or node within a Cisco Unified Communications Manager installation acts as the CDR Agent. On the server or node where both Cisco Unified Communications Manager and the CDR Agent are running, Cisco Unified Communications Manager writes the CDRs into CDR flat files in comma separated value (CSV) format. A special control character ("_") that is prefixed to the filename by the call processing module that indicates that the file is not available for transfer. If this control character is not present, the system assumes that the file is available for transfer, and the CDR Agent then SFTPs those files to the designated CDR repository node. Upon successful transfer, the system deletes the local copy of the file.

Reliability gets the highest priority for the CDRM feature. CDRs comprise very important financial data, so the goal of this feature is to guarantee that no CDR is lost. The Cisco Unified Communications Manager continuously writes CDRs to flat files, closes existing flat files, and opens new ones.The number of records that are written varies by the type of call and the significant changes that occur during a call: such as, ending the call, transferring the call, redirecting the call, splitting the call, or joining the call.


Note On Linux platforms, the CDR Agent collects the CDR/CMR flat files that the Cisco Unified Communications Manager generates and sends these files to the publisher through SFTP. The Windows versions of do not support SFTP. On Windows platforms, the CDR Agent copies the files directly from the subscriber disk to the shared publisher disk.


CDR Repository Manager

Within a Cisco Unified Communications Manager server or cluster, one instance of the CDR Repository Manager runs on the CDR Repository server or node. It manages CDR files that are received from the Cisco Unified Communications Manager nodes and periodically sends the files to the specified customer/third-party billing servers via FTP/SFTP.

When the file arrives on the CDR Repository server or node, the CDR Repository Manager detects it. The system archives the file in a directory that is dedicated to the date that is indicated by the UTC timestamp that was placed in the file name when the file was created.

If any external billing server is specified in the CDRM configuration, the system creates an empty file in each of the corresponding folders for CAR and the billing servers, if CAR or the corresponding billing server is activated. The CDR Agent monitors new CDR/CMR files that are generated on CallManager servers or nodes by the call processing component. It sends the files to the CDR Repository node and then deletes the local copy after the file is pushed out. The file sender component of the CDR Repository Manager detects these empty files and sends the file to the destination with the specified method. If the delivery is successful, the system removes the empty file in the destination directory.

Every Cisco Unified Communications Manager can generate one CDR file and one CMR file every minute for up to 1 hour. You can configure the maximum disk space that is used for storage of CDR files in the CDR Repository through provisioning.

The File Manager component of the CDR Repository Manager runs hourly. When the File Manager runs, it deletes files with dates outside the configured preservation duration. It also checks whether disk usage has exceeded the high water mark. If so, the system deletes the processed CDR files until the low water mark is reached, starting with the oldest files. However, if any CDR file to be deleted was not successfully sent to the specified billing server, the system leaves it in the CDR Repository and raises a notification or alarm. The system creates a flag file during the configured maintenance window, which denies access to the CDR files for the CDR onDemand Service. The system removes the flag file after the maintenance window expires.

For detailed procedures on configuring the CDR Repository Manager and customer billing servers, see the "CDR Repository Manager Configuration" section in the Cisco Unified Serviceability Administration Guide.

CDR onDemand Service

The CDR onDemand Service, is a SOAP/HTTPS-based service, that runs on the CDR Repository server or node. It receives SOAP requests for CDR file name lists based on a user-specified time interval (up to a maximum of 1 hour) and returns all lists that fit the duration that the request specifies.

The CDR onDemand Service can also handle requests for delivering a specific CDR file to a specified destination through an SFTP API. All SFTP connections require userid and password information for each session setup. A separate SFTP session gets set up for every file that is sent, and the session is closed after the file has been sent. The system can activate the CDR onDemand service on the CDR Repository node because it has to access the CDR files in the repository. The system prohibits service during the maintenance window. For detailed information on the CDR onDemand Service, see the Cisco Unified Communications Manager Developers Guide for Release 7.0(1).

Upgrading Cisco Unified Communications Manager

When you upgrade from an earlier version of Cisco Unified Communications Manager to a later version of Cisco Unified Communications Manager, you may not be able to upgrade all your CDR data. For additional information about the limitations that affect the amount of CDR data that may be available after upgrade, see the section titled "Upgrading the CAR Database" in the CDR Analysis and Reporting Administration Guide. You may also need to refer to the latest Data Migration Assistant User Guide and the latest upgrade documentation. Find these documents at http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_installation_guides_list.html

Backup of CDR Database

Be sure that the CAR and CDR Disaster Recovery Service (DRS) is integrated into the Cisco Unified Communications Manager DRS. See the latest release of the Disaster Recovery System Administration Guide at http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html

Related Topics

See the "Activating CAR" section in the Configuring CDR Analysis and Reporting Tool chapter found in the CDR Analysis and Reporting Administration Guide.

See the Configuring the CDR Repository Manager chapter found in the Cisco Unified Serviceability Administration Guide.

See the "CMR Processing" section on page 7-1.

Chapter 2, "How CDRs Are Processed"

Chapter 3, "Types of Call Information Records"

Related Documentation

The following documents contain additional information related to CDRs:

Cisco Unified Serviceability Administration Guide

CDR Analysis and Reporting Administration Guide

Cisco Unified Communications Manager Developers Guide for Release 7.0(1)

Disaster Recovery System Administration Guide