Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide for Release 7.0(1)
Configuring CAR Reports Notification Limits
Downloads: This chapterpdf (PDF - 338.0KB) The complete bookPDF (PDF - 4.04MB) | Feedback

Configuring CAR Reports Notification Limits

Table Of Contents

Configuring CAR Reports Notification Limits

Configuring Notification Limits

Related Topics

Additional Cisco Documentation


Configuring CAR Reports Notification Limits


Before You Begin

Before you start generating reports with CAR, configure the system. See the "Configuring CAR System Parameters" section on page 28-1.

This chapter contains the following topics:

Configuring Notification Limits

Related Topics

Additional Cisco Documentation

Configuring Notification Limits

This section describes how to specify the notification limits for QoS and daily charges.

Procedure


Step 1 Choose Report Config > Notification Limits.

The Set Limits for Notification window displays.

Step 2 In the Daily QoS Parameters area, enter a threshold for good and poor calls.

The threshold applies in the form of a percentage of all calls that must be exceeded to trigger an e-mail alert to the administrator. The default for good calls specifies less than 20 percent, meaning that when good calls represent less than 20 percent of all calls per day, an alert gets sent. The default for poor calls specifies greater than 30 percent, meaning that when poor calls represent more than 30 percent of all calls per day, an alert gets sent. The alert is called the QoS Notification.

Step 3 In the Daily Charge Limit area, enter the number of monetary units (such as dollars, francs, or pounds) that, when exceeded by any user in the system, will trigger sending an e-mail alert to the administrator. The alert is called the Charge Limit Notification.

Step 4 Click the Update button.

Changes take effect immediately. The new values get used whenever the next alert is sent.


Additional Information

See the "Related Topics" section.

Related Topics

CDR Analysis and Reporting Configuration Checklist, page 2-1

Chapter 32, "Understanding the CAR Reports Configurations"

Chapter 33, "Configuring the CAR Rating Engine"

Chapter 34, "Configuring the CAR Reports QoS Values"

Chapter 35, "Configuring the Automatic Generation of CAR Reports and Alerts"

Additional Cisco Documentation

Cisco Unified Communications Operating System Administration Guide

Cisco Unified Serviceability Administration Guide

Cisco Unified Communications Manager Call Detail Records Administration Guide