Cisco Unified Serviceability Administration Guide, Release 6.1(1)
Configuring Alarms
Downloads: This chapterpdf (PDF - 382.0KB) The complete bookPDF (PDF - 4.49MB) | Feedback

Configuring Alarms

Table Of Contents

Configuring Alarms

Configuring an Alarm for a Service

Service Groups in Alarm Configuration

Alarm Configuration Settings

Related Topics


Configuring Alarms


This chapter contains the following topics:

Configuring an Alarm for a Service

Service Groups in Alarm Configuration

Alarm Configuration Settings

Related Topics

Configuring an Alarm for a Service

This section describes how to add or update an alarm for a feature or network service that you manage through Cisco Unified Serviceability.


Note Cisco recommends that you do not change SNMP Trap and Catalog configurations.


Refer to your online OS documentation for more information on how to use your standard registry editor.

Procedure


Step 1 Choose Alarm > Configuration.

The Alarm Configuration window displays.

Step 2 From the Server drop-down list box, choose the server for which you want to configure the alarm; then, click Go.

Step 3 From the Service Group drop-down list box, choose the category of service, for example, Database and Admin Services, for which you want to configure the alarm; then, click Go.


Tip For a list of services that correspond to the service groups, see Table 4-1.


Step 4 From the Service drop-down list box, choose the service for which you want to configure the alarm; then, click Go.

Only services that support the service group and your configuration display.


Tip The drop-down list box displays active and inactive services.


In the Alarm Configuration window, a list of alarm monitors with the event levels displays for the chosen service.In addition, the Apply to All Nodes check box displays.

Step 5 If you want to do so, you can apply the alarm configuration for the service to all nodes in the cluster by checking the Apply to All Nodes check box, provided your configuration supports clusters.

Step 6 Configure the settings, as described in Table 4-2, which includes descriptions for monitors and event levels.

Step 7 To save your configuration, click the Save button.


Note To set the default, click the Set Default button; then, click Save.



Services That Use Cisco Tomcat

The following services use Cisco Tomcat for alarm generation:

Cisco Extension Mobility Application

Cisco IP Manager Assistant

Cisco Extension Mobility

Cisco Web Dialer Web

The system login alarm AuthenticationFailed also uses Cisco Tomcat. To generate alarms for these services, perform the following procedure.

Procedure


Step 1 In Cisco Unified Serviceability, choose Alarm > Configuration.

Step 2 From the Server drop-down list box, choose the server for which you want to configure the alarm; then, click Go.

Step 3 From the Services Group drop-down list box, choose Platform Services; then, click Go.

Step 4 From the Services drop-down list box, choose Cisco Tomcat; then, click Go.

Step 5 If you want to do so, you can apply the alarm configuration for the service to all nodes in the cluster by checking the Apply to All Nodes check box, provided your configuration supports clusters.

Step 6 Configure the settings, as described in Table 4-2, which includes descriptions for monitors and event levels.

Step 7 To save your configuration, click the Save button.


Tip The system sends the alarm if the configured alarm event level for the specific destination in the Alarm Configuration window is equal to or lower than the severity that is listed in the alarm definition. For example, if the severity in the alarm definition equals WARNING_ALARM, and, in the Alarm Configuration window, you configure the alarm event level for the specific destination as Warning, Notice, Informational, or Debug, which are lower event levels, the system sends the alarm to the corresponding destination. If you configure the alarm event level as Emergency, Alert, Critical, or Error, which are higher severity levels, the system does not send the alarm to the corresponding location.

To access the alarm definitions for the Cisco Extension Mobility Application service, Cisco IP Manager Assistant service, Cisco Extension Mobility service, and the Cisco Web Dialer Web Service, choose the JavaApplications catalog in the Alarm Messages Definitions window described in Chapter 5, "Viewing and Updating Alarm Definitions".


Additional Information

See the "Related Topics" section.

Service Groups in Alarm Configuration

Table 4-1 lists the services that correspond to the options in the Service Group drop-down list box in the Alarm Configuration window.

Table 4-1 Service Groups in Alarm Configuration 

Service Group
Services
Notes

CM Services

Cisco CTIManager, Cisco CallManager, Cisco CallManager Cisco IP Phone Service, Cisco DHCP Monitor Service, Cisco Dialed Number Analyzer, Cisco Extended Functions, Cisco IP Voice Media Streaming App, Cisco Messaging Interface, and Cisco TFTP

For a description of these services, see the "Understanding Services" section on page 9-1.

CTI Services

Cisco CallManager Attendant Console Server

For a description of these services, see the "Understanding Services" section on page 9-1.

CDR Services

Cisco CDR Agent and Cisco CDR Repository Manager

For a description of these services, see the "Understanding Services" section on page 9-1.

Database and Admin Services

Cisco Bulk Provisioning Service, Cisco Database Layer Monitor, and Cisco License Manager

For a description of these services, see the "Understanding Services" section on page 9-1.

Performance and Monitoring Services

Cisco AMC Service and Cisco RIS Data Collector

For a description of these services, see the "Understanding Services" section on page 9-1.

Directory Services

Cisco DirSync

For a description of this service, see the "Understanding Services" section on page 9-1.

Backup and Restore Services

Cisco DRF Local and Cisco DRF Master

For a description of these services, see the "Understanding Services" section on page 9-1.

System Services

Cisco Trace Collection Service

For a description of these services, see the "Understanding Services" section on page 9-1.

Platform Services

Cisco Tomcat

For a description of this service, see the "Understanding Services" section on page 9-1.


Alarm Configuration Settings

Table 4-2 describes all alarm configuration settings, even though the service may not support the settings. For related procedures, see the "Related Topics" section.

Table 4-2 Alarm Configuration Settings 

Name
Description

Server

From the drop-down box, choose the server for which you want to configure the alarm; then, click Go.

Service Group

From the drop-down box, choose the category of services, for example, Database and Admin Services, for which you want to configure the alarm; then, click Go.

Service

From the Service drop-down box, choose the service for which you want to configure the alarm; then, click Go.

Only services that support the service group and your configuration display.

Tip The drop-down list box displays active and inactive services.

Apply to All Nodes

To apply the alarm settings for the service to all nodes in a cluster, check the check box.

Enable Alarm for Local Syslogs

The SysLog viewer serves as the alarm destination. The program logs errors in the Application Logs within SysLog Viewer and provides a description of the alarm and a recommended action. You can access the SysLog Viewer from the Cisco Unified Communications Manager Real-Time Monitoring Tool.

For information on viewing logs with the SysLog Viewer, refer to the Cisco Unified Communications Manager Real-Time Monitoring Tool Administration Guide.

Enable Alarm for Remote Syslogs

The Syslog file serves as the alarm destination. Check this check box to enable the Syslog messages to be stored on a Syslog server and to specify the Syslog server name. If this destination is enabled and no server name is specified, Cisco Unified Serviceability does not send the Syslog messages.

Tip In the Server field, enter the name or IP address of the remote Syslog server that you want to use to accept Syslog messages. For example, if you want to send the alarms to CiscoWorks 2000, specify the CiscoWorks 2000 server name.
Tip Do not specify a Cisco Unified Communications Manager server as the destination because the Cisco Unified Communications Manager server does not accept Syslog messages from another server.

Enable Alarm for SDI Trace

The SDI trace library serves as the alarm destination.

To log alarms in the SDI trace log file, check this check box and check the Trace On check box in the Trace Configuration window for the chosen service. For information on configuring settings in the Trace Configuration window in Cisco Unified Serviceability, see the "Configuring Trace Parameters" section on page 7-1.

Enable Alarm for SDL Trace

The SDL trace library serves as the alarm destination. This destination applies only to the Cisco CallManager service and the CTIManager service. Configure this alarm destination by using Trace SDL configuration.

To log alarms in the SDL trace log file, check this check box and check the Trace On check box in the Trace Configuration window for the chosen service. For information on configuring settings in the Trace Configuration window in Cisco Unified Serviceability, see the "Configuring Trace Parameters" section on page 7-1.

Alarm Event Level

From the drop-down list box, choose one of the following options:

Emergency—This level designates system as unusable.

Alert—This level indicates that immediate action is needed.

Critical—The system detects a critical condition.

Error—This level signifies an error condition exists.

Warning—This level indicates that a warning condition is detected.

Notice—This level designates a normal but significant condition.

Informational—This level designates information messages only.

Debug—This level designates detailed event information that Cisco TAC engineers use for debugging.


Related Topics

Configuring an Alarm for a Service

Service Groups in Alarm Configuration

Alarm Configuration Settings

Understanding Alarms, page 3-1

Cisco Unified Communications Manager Real-Time Monitoring Tool Administration Guide