Cisco Unified Communications Manager Real-Time Monitoring Tool Administration Guide
Understanding Performance Monitoring
Downloads: This chapterpdf (PDF - 396.0KB) The complete bookPDF (PDF - 4.2MB) | Feedback

Understanding Performance Monitoring

Table Of Contents

Understanding Performance Monitoring

Using RTMT for Performance Monitoring

Category Tabs

Sample Rate

Adding Counters to Monitor

Alert Notification for Counters

Zoom Counter

Counter Properties

Troubleshooting Perfmon Data Logging

Related Topics

Understanding Performance Monitoring

Cisco Unified Communications Manager directly updates Performance counters (called PerfMon counters). The counters contain simple, useful information on the system and devices on the system, such as number of registered phones, number of active calls, and number of available conference bridge resources.

The Cisco CallManager object contains most of the Cisco Unified Communications Manager performance counters, and these counters have only one instance. The instance-based counters that belong to the other objects can have zero or more instances. For example, if two phones are registered to Cisco Unified Communications Manager, two instances of each counter that belong to the Cisco phones object exist.

You can monitor the performance of the components of the system and the components for the application on the system by choosing the counters for any object by using RTMT. The counters for each object display when the folder expands.

You can log perfmon counters locally on the computer and use the performance log viewer in RTMT to display the perfmon CSV log files that you collected or the Realtime Information Server Data Collection (RISDC) perfmon logs.

This chapter contains information on the following topics:

Using RTMT for Performance Monitoring

Troubleshooting Perfmon Data Logging

Using RTMT for Performance Monitoring

RTMT integrates with Cisco Unified Communications Manager administration and serviceability software. RTMT displays performance information for all Cisco Unified Communications Manager components.RTMT provides alert notification for troubleshooting performance. It also periodically polls performance counter to display data for that counter. Refer to "Displaying a Counter Description" section on page 5-7 for examples on displaying perfmon counters in a chart or table format.

Perfmon monitoring allows you to perform the following tasks:

Monitor performance counters including all the Cisco Unified Communications Manager nodes in a cluster, TFTP servers, and database servers.

Continuously monitor a set of preconfigured objects AND receive notification in the form of an e-mail message.

Associate counter threshold settings to alert notification. An e-mail or popup message provides notification to the administrator.

Save and restore settings, such as counters being monitored, threshold settings, and alert notifications, for customized troubleshooting tasks.

Display up to six perfmon counters in one chart for performance comparisons.

RTMT displays performance counters in chart or table format. Chart format looks like a miniature window of information. Up to six charts display in the RTMT performance monitoring pane for each category tab that you create. You can display a particular counter by double clicking the counter in the perfmon monitoring pane. Because chart view represents the default, you configure the performance counters to display in table format when you create a category.

You can remove a counter chart (table entry) with the Remove Chart/TableEntry menu item in the Perfmon menu in the menu bar.

Tip The polling rate in each precanned monitoring window remains fixed, and the default value specifies 30 seconds. If the collecting rate for the AMC (Alert Manager and Collector) service parameter changes, the polling rate in the precanned window also updates. In addition, the local time of the RTMT client application and not the backend server time, provides the basis for the time stamp in each chart.

For more information on Service Parameters, refer to Cisco Unified Communications Manager Administration Guide.

See the following sections for configuration options in the RTMT perfmon monitoring pane:

Category Tabs

Sample Rate

Using RTMT for Performance Monitoring

Zooming a Counter, page 5-6

Category Tabs

A category comprises a group of monitored performance counters. A tab in the RTMT monitoring pane contains the category name. All performance counters that are monitored in this tab belong to a category. The system polls the performance counters in the tab at the same rate, with each category configured to have its own polling rate.

You can create custom categories in the RTMT monitoring pane to view information that helps you troubleshoot specific performance, system, or device problems. If your system is experiencing performance problems with specific objects, create custom categories to monitor the performance of the counters within the object. If the system is experiencing problems with specific devices, create custom categories to monitor the devices in your system. In addition, you can create alert notifications for counters and gateways in these custom categories. To create custom categories, you add a new category tab. When the tab is created, you specify the specific performance counters, devices, and alerts within that tab and then save your custom category by using Profile.

Sample Rate

Note The application polls counters, devices, and gateway ports to gather status information. In the RTMT monitoring pane, you configure the polling intervals for the performance counters, devices, and gateway ports for each category tab that you create. High-frequency polling rate affects the performance on the server. The minimum polling rate for monitoring a performance counter in chart view equals 5 seconds; the minimum rate for monitoring a performance counter in table view equals 1 second. The default for both specifies 10 seconds.

Adding Counters to Monitor

To troubleshoot system performance problems, you add the counter that is associated with the perfmon object to the RTMT performance monitoring pane, which displays a chart for the counter. Before you add counters, see the "Category Tabs" section.

Category tabs contain up to six perfmon counter charts.

Alert Notification for Counters

Using the alert notification feature, the application notifies you of system problems. Perform the following configuration setup to activate alert notifications for a system counter:

From the RTMT Perfmon Monitoring pane, choose the system perfmon counter.

Set up an e-mail or a message popup window for alert notification.

Determine the threshold for the alert (for example, an alert activates when calls in progress exceed the threshold of over 100 calls or under 50 calls).

Determine the frequency of the alert notification (for example, the alert occurs once or every hour).

Determine the schedule for when the alert activates (for example, on a daily basis or at certain times of the day).

Zoom Counter

To get a closer look at performance monitors, zoom the monitor counter in the RTMT perfmon monitoring pane by highlighting the counter chart and choosing System > Performance > Zoom Chart.

Counter Properties

Counter properties allow you to display a description of the counter and configure data-sampling parameters.

The Counter Property window contains the option to configure data samples for a counter. The performance counters that display in the RTMT performance monitoring pane contain green dots that represent samples of data over time. You can configure the number of data samples to collect and the number of data points to show in the chart. After the data sample is configured, view the information by using the View All Data/View Current Data menu option to view all the data that a perfmon counter collected.

Additional Information

See the "Related Topics" section.

Troubleshooting Perfmon Data Logging

The troubleshooting perfmon data logging feature assists Cisco TAC in identifying system problems. When you enable troubleshooting perfmon data logging, you initiate the collection of a set of Cisco Unified Communications Manager and operating system performance statistics on the selected node. The statistics that are collected include comprehensive information that can be used for system diagnosis.

The system automatically enables troubleshooting perfmon data logging to collect statistics from a set of perfmon counters that provides comprehensive information on the system state. When Troubleshooting Perfmon Data Logging is enabled, Cisco estimates that the system experiences a less than 5-percent increase in CPU utilization and an insignificant increase in the amount of memory that is being used, and it writes approximately 50 MB of information to the log files daily.

You can perform the following administrative tasks with the troubleshooting perfmon data logging feature:

Enable and disable the trace filter for Troubleshooting perfmon data logging.

Monitor a set of predefined System and Cisco Unified Communications Manager performance objects and counters on each server.

Log the monitored performance data in CSV file format on the server in the active log partition in the var/log/active/cm/log/ris/csv directory. The log file uses the following naming convention: PerfMon_<node>_<month>_<day>_<year>_<hour>_<minute>.csv; for example, PerfMon_172.19.240.80_06_15_2005_11_25.csv. Specify the polling rate. This rate specifies the rate at which performance data gets gathered and logged. You can configure the polling rate down to 5 seconds. Default polling rate equals 15 seconds.

View the log file in graphical format by using the Microsoft Windows performance tool or by using the Performance Log viewer in the Real-Time Monitoring Tool.

Specify the maximum number of log files that will be stored on disk. Log files exceeding this limit get purged automatically by removal of the oldest log file. The default specifies 50 files.

Specify the rollover criteria of the log file based on the maximum size of the file in megabytes. The default value specifies 2 MB.

Collect the Cisco RIS Data Collector PerfMonLog log file by using the Trace & Log Central feature of the Real-Time Monitoring Tool or Command Line Interface.

For more information on configuring Troubleshooting Perfmon Data Logging, see "Configuring Troubleshooting Perfmon Data Logging" section on page 5-12.

The troubleshooting perfmon data-logging feature collects information from the following counters within the following perfmon objects.

Refer to the Performance Objects and Counters for Cisco Unified Communications Manager for a description on the counters:

Cisco CallManager Object

Communications ManagerHeartBeat







Cisco CallManager System Performance Object





QueueSignalsPresent 1-High

QueueSignalsPresent 2-Normal

QueueSignalsPresent 3-Low

QueueSignalsPresent 4-Lowest

QueueSignalsProcessed 1-High

QueueSignalsProcessed 2-Normal

QueueSignalsProcessed 3-Low

QueueSignalsProcessed 4-Lowest

QueueSignalsProcessed Total




Cisco SIP Stack Object




Cisco TFTP









































Process Object



% CPU Time

Page Fault Count

Process Status




Thread Count

Memory Object

Used Kbytes

Free Kbytes

Total Kbytes

Shared Kbytes

Buffers Kbytes

Cached Kbytes

Free Swap Kbytes

Total Swap Kbytes

Used Swap Kbytes

Pages Input

Pages Output


Used VM Kbytes

Total VM Kbytes

% Page Usage

% VM Used

% Mem Used

Processor Object

Irq Percentage

Softirq Percentage

IOwait Percentage

User Percentage

Nice Percentage

System Percentage

Idle Percentage

%CPU Time

Thread Object—Troubleshooting Perfmon Data Logger only logs Cisco Unified Communications Manager threads.

%CPU Time

Partition Object

Used Mbytes

Total Mbytes


Await Read Time

Await Write Time

Await Time

% CPU Time

Read Bytes Per Sec

Write Bytes Per Sec

Queue Length

IP Object

In Receives

In HdrErrors

In UnknownProtos

In Discards

In Delivers

Out Requests

Out Discards

Reasm Reqds

Reasm Oks

Reasm Fails

Frag OKs

Frag Fails

Frag Creates

InOut Requests

TCP Object

Active Opens

Passive Opens

Attempt Fails

Estab Resets

Curr Estab

In Segs

Out Segs

Retrans Segs

InOut Segs

Network Interface Object

Rx Bytes

Rx Packets

Rx Errors

Rx Dropped

Rx Multicast

Tx Bytes

Tx Packets

Tx Errors

Tx Dropped

Total Bytes

Total Packets

Tx QueueLen

System Object

Allocated FDs

Freed FDs

Being Used FDs

Max FDs

Total Processes

Total Threads

Total CPU Time

Related Topics

Using RTMT for Performance Monitoring

Troubleshooting Perfmon Data Logging

Configuring and Displaying Performance Counters, page 5-1

Performance Objects and Counters for the System, page A-1

Performance Objects and Counters for Cisco Unified Communications Manager, page B-1