Cisco Unified Communications Manager CDR Analysis and Reporting Administration Guide for Cisco Unified Communications Manager, Release 6.0(1)
CAR User Reports Configuration
Downloads: This chapterpdf (PDF - 490.0KB) The complete bookPDF (PDF - 3.65MB) | Feedback

CAR User Reports Configuration

Table Of Contents

CAR User Reports Configuration

Configuring Bills Reports

Configuring Individual Bills Reports

Configuring Department Bills Reports

Configuring Top N Reports

Configuring Top N by Charge Reports

Configuring Top N by Duration Reports

Configuring Top N by Number of Calls Reports

Configuring Cisco Unified Communications Manager Assistant Usage Reports

Configuring Manager Call Usage for Cisco Unified Communications Manager Assistant Reports

Configuring Assistant Call Usage for Cisco Unified Communications Manager Assistant Reports

Configuring Cisco IP Phone Services Reports

Mailing a Report

Searching for Users

Related Topics


CAR User Reports Configuration


CAR provides reporting capabilities for three levels of users:

Administrators—Generate system reports to help with load balancing, system performance, and troubleshooting.

Managers—Generate reports for users, departments, and QoS to help with call monitoring for budgeting or security purposes and for determining the voice quality of the calls.

Individual users—Generate a billing report for their calls.

This chapter contains the following topics:

Configuring Bills Reports

Configuring Top N Reports

Configuring Cisco Unified Communications Manager Assistant Usage Reports

Configuring Cisco IP Phone Services Reports

Mailing a Report

Searching for Users

Related Topics


Note Depending on your job function, you may not have access to every report that is described in this chapter.


Configuring Bills Reports

Individual bills provide call information for the date range that you specify. You can either view reports that the system automatically generates or generate new reports. Only CAR administrators can schedule reports for automatic generation. If you are an administrator, see the "Configuring CAR System Scheduler" section on page 3-6, for more information.

Department bills provide call information and quality-of-service (QoS) ratings. If you are a manager, you can generate a summary or detailed report of the calls that all users who report to you made, or only those users that you choose.

If you are a CAR administrator, you can generate a summary or detailed report of the calls that some or all users in the system made. This report helps you keep track of all calls on a user-level basis for the entire system.

This section contains the following procedures:

Configuring Individual Bills Reports

Configuring Department Bills Reports

Configuring Individual Bills Reports

This section describes how to view, or mail, summary or detail information reports about users, managers, and administrators. Administration users do not get access to this report.

Procedure


Step 1 Perform one of the following tasks:

If you are a user or manager, choose Bills > Individual.

If you are a CAR administrator, choose User Reports > Bills > Individual.

The Individual Bill window displays.

Step 2 In the Report Type field, choose Summary or Detail.

Summary reports provide a summary of all calls for a chosen period, including the call classification (Internal, Local, Long Distance, International, or On Net), the QoS information, the total number of calls that were made, and the charges that were incurred. Detailed reports provide the date of the call, origination time of the call, origination number (calling number), destination number (called number), call classification (On Net, Internal, Local, Long Distance, International, Incoming, Tandem, or Others), QoS information, duration of time for which the call lasted (in seconds), and the charge for the call, based on the rating engine configuration in CAR for all calls over a chosen period.

Step 3 In the Available Reports field, choose an automatically generated report (if available) and go to Step 6, or use the default Generate New Report and go to Step 4.


Note You can only choose the automatically generated report if you are logged in as CAR administrator. The automatically generated reports do not display in the drop-down list box if you are logged in as a manager or individual user.


Step 4 Choose the date range for the period for which you want to see call information.

Step 5 If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records.

Step 6 Click the View Report button.

The report displays.

Step 7 If you want to mail the report, click the Send Report button. To send the report, follow the procedure that is described in the "Mailing a Report" section.


Additional Information

See the "Related Topics" section.

Configuring Department Bills Reports


Caution Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.

This section describes how to generate, view, or mail summary or detail information about departmental bills.

Procedure


Step 1 Perform one of the following tasks:

If you are a manager, choose Bills > Department.

If you are a CAR administrator, choose User Reports > Bills > Department.

The Department Bill window displays.

Step 2 In the Report Type field, choose Summary or Detail.

Summary reports provide a summary of all calls for a chosen period, including the call classification (On Net, Internal, Local, Long Distance, International, Incoming, Tandem, or Others), the QoS information, the total number of calls that were made, and the charges that were incurred. Detailed reports provide the date of the call, origination time of the call, origination number (calling number), destination number (called number), call classification (On Net, Internal, Local, Long Distance, International, Incoming, Tandem, or Others), QoS information, duration for which the call lasted (in seconds), and the charge for the call, based on the rating engine configuration in CAR for all calls over a chosen period.

Step 3 In the Available Reports field, choose an automatically generated report (if available) and go to Step 13, or use the default Generate New Report and go to Step 4.


Note You can only choose the automatically generated report if you are logged in as a CAR administrator. The automatically generated reports do not display in the drop-down list box if you are logged in as a manager.


Step 4 Choose the date range for the period for which you want to see call information.

Step 5 If you are a manager, continue with Step 6; otherwise, if you are a CAR administrator, continue with Step 10.

Step 6 To choose all of your direct reports, check the Select All Reportees check box.

The List of Reportees shows your direct reports.

Step 7 To choose individual reportees, choose the reports that are shown in the List of Reportees.

Step 8 Click the Add button.

The department bill includes only users who are listed in the Selected Reportees box.

Step 9 To see the reportees under a particular user, choose the user and click the Down button.

All reportees to the chosen user display.

Step 10 If you are a CAR administrator, check the Select All Users check box to include all users. If you are a manager, proceed to Step 12.

Step 11 To specify individual users, enter the user ID of the individual that you want to include in the report in the User ID field. Click the Add button.

You can also use a provided search function. See the "Searching for Users" section, for instructions on using the search feature.

Step 12 If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records.

Step 13 Click the View Report button.

The report displays.

Step 14 If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the "Mailing a Report" section.


Additional Information

See the "Related Topics" section.

Configuring Top N Reports

Top N Charge reports the users who made the maximum charge for the specified date range. If you are a manager, the report includes the top charges for all calls that users who report to you made during the specified period. If you are a CAR administrator, the report includes the top charges for all calls that all users on the system made for the specified period. You can generate each Top N Charge report with options to show the information by individual Users, by destinations, or by all calls.

Top N Duration reports the top number of users that incurred a maximum time on calls during a period that you specify. If you are a manager, the report lists the top number of users who report to you that incurred a maximum time for calls that were made during the chosen date range, starting with the longest. If you are a CAR administrator, the report lists the top number of users that incurred a maximum time for calls that were made during the chosen date range, starting with the longest. You can generate each Top N Duration report with options to show the information by individual users, by destinations, or by all calls.

Top N Number of Calls reports the top number of calls that were made and received by users during a period that you specify. If you are a manager, the report lists the top number of calls by users among the users who report to you for the chosen date range. If you are a CAR administrator, the report lists the top number of calls for each user in the system. You can generate each Top N Number of Calls report with options to show the information by individual users and by extensions.

This section contains the following topics:

Configuring Top N by Charge Reports

Configuring Top N by Duration Reports

Configuring Top N by Number of Calls Reports

Configuring Top N by Charge Reports

This section describes how to generate, view, or mail reports about the top calls when classified by cost.


Caution Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.

Procedure


Step 1 Perform one of the following tasks:

If you are a manager, choose Top N > By Charge.

If you are a CAR administrator, choose User Reports > Top N > By Charge.

The Top N Charge window displays.

Step 2 In the Select Call Types area, check the check boxes for the types of calls that you want the report to include. These boxes display only when you choose Generate New Report from the Available Reports drop-down list box, as described in Step 4. Table 5-1 describes the call types.


Tip To check all check boxes, click Select All; to uncheck the check boxes, click Clear All.


Table 5-1 Top N by Charge Call Types 

Call Type
Description

On Net

Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See "Configuring the Dial Plan" section on page 3-2.

Internal

Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used).

Local

Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes.

Long Distance

Long-distance calls that originate in the Cisco Unified Communications Manager network going out through the PSTN.

International

International calls that originate in the Cisco Unified Communications Manager network going out through the PSTN.

Incoming

Inbound calls that originate outside the Cisco Unified Communications Manager network and enter the Cisco Unified Communications Manager network through a gateway.

Tandem

Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and transfer outbound from the Cisco Unified Communications Manager network through a gateway.

Others

All other outgoing calls, such as toll-free numbers or emergency calls such as 911.


Step 3 In the Report Type field, choose a report type as described in Table 5-2.

Table 5-2 Top N by Charge Report Types 

Report Type
Description

By Individual Users

This report lists the users who incurred the maximum charges.

By Destinations

This report lists the destinations that incurred the maximum charges.

By All Calls

This default report lists the calls that incurred the maximum charges.



Note Top N Destination by Charge reports display the Top destinations based on the charge incurred. If the same destination number comprises different call classifications (for example, some are Internal and some are Incoming), they get treated and listed separately in these reports.


Step 4 In the Available Reports field, choose an automatically generated report (if available) and go to Step 8 or use the default setting, Generate New Report, and go to Step 5.


Note You can only choose the automatically generated report if you are logged in as CAR administrator. The automatically generated reports do not display in the drop-down list box if you are logged in as a manager.


Step 5 Enter the number (n) of records to display in the report in the No of Records field. The default designates five.

Step 6 Choose the date range for the period for which you want to generate the report.

Step 7 If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records.

Step 8 Click the View Report button.

The report displays.

Step 9 If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the "Mailing a Report" section.


Additional Information

See the "Related Topics" section.

Configuring Top N by Duration Reports

This section describes how to generate, view, or mail reports about the top calls when they are classified by duration.


Caution Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.

Procedure


Step 1 Perform one of the following tasks:

If you are a manager, choose Top N > By Duration.

If you are a CAR administrator, choose User Reports > Top N > By Duration.

The Top N by Duration window displays.

Step 2 In the Select Call Types area, check the check boxes for the types of calls that you want included in the report. These boxes display only when you choose Generate New Report from the Available Reports drop-down list box, as described in Step 4. Table 5-3 describes the call types.

Table 5-3 Top N by Duration Call Types 

Call Type
Description

On Net

Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See "Configuring the Dial Plan" section on page 3-2.

Internal

Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used).

Local

Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes.

Long Distance

Long-distance calls that originate in the Cisco Unified Communications Manager network going out through the PSTN.

International

International calls that originate in the Cisco Unified Communications Manager network going out through the PSTN.

Incoming

Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network.

Tandem

Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and then are transferred outbound from the Cisco Unified Communications Manager network through a gateway.

Others

All other outgoing calls, such as toll-free numbers or emergency calls such as 911.


Step 3 In the Report Type field, choose a report type as described in Table 5-4.

Table 5-4 Top N by Duration Report Types

Report Type
Description

By Individual Users

This report lists the users who incurred the maximum duration.

By Destinations

This report lists the destinations that incurred the maximum duration.

By All Calls

This report lists the calls that incurred the maximum duration.



Note Top N Destinations by Duration reports display the Top destinations based on the duration of the calls. If the same destination number comprises different call classifications (for example, some are Internal and some are Incoming), they get treated and listed separately in these reports.


Step 4 In the Available Reports field, choose an automatically generated report (if available) and go to Step 8 or use the default setting, Generate New Report, and go to Step 5.


Note You can only choose the automatically generated report if you are logged in as a CAR administrator. The automatically generated reports do not display in the drop-down list box if you are logged in as a manager.


Step 5 Enter the number (n) of records to display in the report in the No of Records field. The default designates five.

Step 6 Choose the date range for the period for which you want to generate the report.

Step 7 If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records.

Step 8 Click the View Report button.

The report displays.

Step 9 If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the "Mailing a Report" section.


Additional Information

See the "Related Topics" section.

Configuring Top N by Number of Calls Reports

This section describes how to generate, view, or mail reports about the top calls when classified by volume.


Caution Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.

Procedure


Step 1 Perform one of the following tasks:

If you are a manager, choose Top N > By Number of Calls.

If you are a CAR administrator, choose User Reports > Top N > By Number of Calls.

The Top N by Number of Calls window displays.

Step 2 In the Select Call Types area, check the check boxes for the types of calls that you want included in the report. These boxes display only when you choose Generate New Report from the Available Reports drop-down list box, as described in Step 4. Table 5-5 describes the call types.

Table 5-5 Top N by Number of Calls Call Types 

Call Type
Description

On Net

Outgoing calls that originate on one Cisco Unified Communications Manager network, go out through a trunk, and terminate on a different Cisco Unified Communications Manager network. For CAR purposes, any outgoing call can be classified as an On Net call if it is configured as such in the CAR dial plan configuration window. See "Configuring the Dial Plan" section on page 3-2.

Internal

Intracluster calls that originate in the Cisco Unified Communications Manager network and end in the same Cisco Unified Communications Manager network (no gateways or trunks are used).

Local

Local calls that are routed through the public switched telephone network (PSTN) to numbers without an area code or that include one of the local area codes.

Long Distance

Long-distance calls that originate in the Cisco Unified Communications Manager network going out through the PSTN.

International

International calls that originate in the Cisco Unified Communications Manager network going out through the PSTN.

Incoming

Inbound calls that originate outside the Cisco Unified Communications Manager network, enter through a gateway, and go into the Cisco Unified Communications Manager network.

Tandem

Inbound calls that originate outside the Cisco Unified Communications Manager network, enter the Cisco Unified Communications Manager network through a gateway, and transfer outbound from the Cisco Unified Communications Manager network through a gateway.

Others

All other outgoing calls, such as toll-free numbers or emergency calls such as 911.


Step 3 In the Report Type field, choose a report type as described in Table 5-6.

Table 5-6 Top N by Number of Calls Report Types

Report Type
Description

By Individual Users

This report lists the users who incurred the maximum number of calls.

By Extensions

This report lists the extensions that have placed or received the greatest number of calls in your group (managers) or the system (CAR administrators).


Step 4 In the Available Reports field, choose an automatically generated report (if available) and go to Step 8 or use the default Generate New Report and go to Step 5.


Note You can only choose the automatically generated report if you are logged in as a CAR administrator. The automatically generated reports do not display in the drop-down list box if you are logged in as a manager.


Step 5 Enter the number (n) of records that display in the report in the No of Records field. The default designates five.

Step 6 Choose the date range for the period for which you want to generate the report.

Step 7 If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records.

Step 8 Click the View Report button.

The report displays.

Step 9 If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the "Mailing a Report" section.


Additional Information

See the "Related Topics" section.

Configuring Cisco Unified Communications Manager Assistant Usage Reports

CAR provides call completion usage reports for the following Cisco Unified Communications Manager Assistant users: manager(s) and the configured/assigned assistant(s) that manage the calls of the manager(s). Only CAR administrators can generate Cisco Unified Communications Manager Assistant reports. The Cisco Unified Communications Manager Assistant menu allows you to choose all or a subset of managers or assistants by using simple search functionality that is based on partial or complete first or last name. You can generate these reports on demand in either PDF or CSV format and e-mail them. In addition, you can choose the time range and generate either detailed or summary level reports.

The manager reports can include calls that only managers handle for themselves, calls that only assistants handle for managers, and calls that qualify in either case. The summary report for a manager shows the number of calls of each call classification type, the total number of calls, and the total duration of all calls (in seconds) for each manager and/or assistant. The detail report for a manager shows the date, origination time, origination number (calling number), destination (called number), call classification, and duration (in seconds) for each call for each manager and/or assistants, and the cumulative duration total for the manager.

The assistant reports can include calls that only assistants handle for themselves, or calls that only assistants handle for managers, and calls that qualify in either case. The summary report for an assistant shows the number of calls of each type and total of them apart from duration for each manager (and/or assistant). The detail assistant report shows the date, origination time, origination (calling number), destination (called number), call classification, and duration (in seconds) for each call for all the managers (and/or assistant) and the cumulative duration total for the assistant.

This section contains the following procedures:

Configuring Manager Call Usage for Cisco Unified Communications Manager Assistant Reports

Configuring Assistant Call Usage for Cisco Unified Communications Manager Assistant Reports

Configuring Manager Call Usage for Cisco Unified Communications Manager Assistant Reports

This section describes how to generate a manager call usage report for Cisco Unified Communications Manager Assistant. Only CAR administrators can generate Cisco Unified Communications Manager Assistant reports.


Caution Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.

Procedure


Step 1 Choose User Reports > Cisco Unified Communications Manager Assistant > Manager Call Usage.

The Call Usage for Manager window displays.

Step 2 From the Report Type drop-down list, choose either Summary or Detail.

Step 3 From the Calls handled by drop-down list, choose Manager, Assistant for Manager, or Manager & Assistant for Manager.

Step 4 Choose the date range for the period for which you want to see call information.

Step 5 In the Select Manager(s) box, either check the Select All Manager(s) check box and enter a manager's ID or click the Select Manager(s) link to search for a manager's ID and enter the ID(s) in the Manager Id field.

Step 6 Click Add.

The ID that you chose displays in the Selected Manager(s) box.

Step 7 If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records.

The report displays.

Step 8 If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the "Mailing a Report" section.


Note To remove a manager from the Selected Manager(s) list, highlight the ID and click Remove. To remove all managers from the list, click Remove All.



Additional Information

See the "Related Topics" section.

Configuring Assistant Call Usage for Cisco Unified Communications Manager Assistant Reports

This section describes how to generate an assistant call usage report for Cisco Unified Communications Manager Assistant. Only CAR administrators can generate these reports.


Caution Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.

Procedure


Step 1 Choose User Reports > Cisco Unified Communications Manager Assistant> Assistant Call Usage.

The Call Usage for Assistant window displays.

Step 2 From the Report Type drop-down list, choose either Summary or Detail.

Step 3 From the Calls handled by drop-down list, choose Assistant, Assistant for Manager, or Assistant & Assistant for Manager.

Step 4 Choose the date range for the period for which you want to see call information.

Step 5 In the Select Assistant(s) box, either check the Select All Assistant(s) check box and enter an assistant's ID or click the Select Assistant(s) link to search for an assistant's ID and enter the ID(s) in the Assistant Id field.

Step 6 Click Add.

The ID that you chose displays in the Selected Assistant(s) box.

Step 7 If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records.

Step 8 Click the View Report button.

The report displays.

Step 9 If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the "Mailing a Report" section.


Note To remove a manager from the Selected Assistant(s) list, highlight the ID and click Remove. To remove all assistants from the list, click Remove All.



Additional Information

See the "Related Topics" section.

Configuring Cisco IP Phone Services Reports

Only CAR administrators can generate the Cisco Unified IP Phone Services report. You can generate a report that shows chosen Cisco Unified IP Phone services, the number of users who are subscribed to each of the chosen services, and the subscription percentage for each of the chosen services.

Use the following instructions to generate a report that shows the usage of specific Cisco Unified IP Phone services.


Caution Use CAR only during off-peak hours. Otherwise, data collection and report generation could cause performance degradation on the Cisco Unified Communications Manager system.

Procedure


Step 1 Choose User Reports > Cisco Unified IP Phone.

The Cisco Unified IP Phone window displays a list of all Cisco Unified IP Phone services that have been configured in the system.

Step 2 In the List of Cisco Unified IP Phone area, choose the services that you want to include in the report.

Step 3 Click the right arrow to add the chosen service to the Selected Cisco Unified IP Phone box.

The report will include all services that are listed in this box when you generate it.

Step 4 If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. Be aware that the CSV-format report is limited to 20,000 records. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. Be aware that the PDF-format report is limited to 5000 records.

The report displays.

Step 5 If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the "Mailing a Report" section.


Additional Information

See the "Related Topics" section.

Mailing a Report

You can e-mail all reports in CAR. You can send a report by mail from any report window in CAR. You can also view the report first and then send it.

Before You Begin

To e-mail reports, first configure valid Mail Parameters. The Mail Parameters allow CAR to send e-mail by using the e-mail server in your system. See the "Configuring Mail Server Parameters" section on page 3-1, for more information. Also, set up the details of the report that you want generated. See the following sections:

Configuring Bills Reports

Configuring Top N Reports

Configuring Cisco IP Phone Services Reports

Configuring Cisco Unified Communications Manager Assistant Usage Reports

CAR System Reports Configuration, page 6-1

CAR Device Reports Configuration, page 7-1

CDR Search Configuration, page 8-1

This section describes how to mail a CAR report.

Procedure


Step 1 Within any CAR Reports window or after viewing the report, click the Send Report button.

The Mail To window displays.

Step 2 Enter the e-mail ID for the user to whom you want to send the report.

Step 3 You can search for a user by clicking the To button.

A User Search window displays.

Step 4 In the First Name and Last Name fields, enter characters of the first or last name of the user and click the Search button.

A User Search Results window displays in the same page and lists all users who matched the search criteria that you entered.

Step 5 In the row for the user to whom you want to send the report, click the Select link.

The user that you chose gets added to the To field of the Mail To window. Repeat this step to add more users to the list of people who will be e-mailed a copy of this report.

Step 6 When you have added all users, click the Close button in the User Search window.

The users who are listed in the Search Users window get copied to the To field of the Mail To window.

Step 7 To add a user to the Cc field, click the Cc button and follow the same instructions as described in Step 4 through Step 6.

Step 8 In the Subject field, enter a subject message (optional).

Step 9 In the Message area, enter a message (optional).

Step 10 To send the report, click the Send button.


Additional Information

See the "Related Topics" section.

Searching for Users

Many of the reports in CAR provide a search function, so you can look for users. The following CAR reports support search by user:

User Reports—Department and individual bills, Top N by charge, duration, and number of calls, Cisco Unified Communications Manager Assistant, and Cisco Unified IP Phone

System Reports—QoS details, Traffic Summary (Extn)

All reports that can be generated can be mailed via the Send Report button

Before You Begin

You must use the window in User Reports or System Reports that allows you to search for users.

This section describes how to search for a user.

Procedure


Step 1 Click the Search Users link.

A User Search window displays.

Step 2 In the First Name and Last Name fields, enter characters of the first or last name of the user and click the Search button.

A User Search Results window displays in the same window and lists all users who matched the search criteria that you entered.

Step 3 In the row for the user that you want, click the Select link.

The user that you chose gets added to the List of Users in the User Search window. Repeat this step to add more users.

Step 4 When you have added all users, click the Close button in the User Search window.


Additional Information

See the "Related Topics" section.

Related Topics

CAR User Reports Configuration

CAR System Reports Configuration, page 6-1

CAR System Configuration, page 3-1

CAR Device Reports Configuration, page 7-1

CDR Search Configuration, page 8-1

Cisco IP Phone Services Report Results, page 11-16

Configuring Cisco Unified Communications Manager Assistant Usage Reports

Configuring Manager Call Usage for Cisco Unified Communications Manager Assistant Reports

Configuring Assistant Call Usage for Cisco Unified Communications Manager Assistant Reports

Top N By Number of Calls Report Results, page 11-8

Configuring Top N by Charge Reports

Configuring Top N by Duration Reports

Top N By Charge or Duration Report Results, page 11-6

Configuring Top N by Number of Calls Reports

Bill Summary Report Results, page 11-2

Bill Detail Report Results, page 11-4

Configuring Individual Bills Reports