Cisco Unified CallManager Serviceability Administration Guide, Release 5.0(1)
Troubleshooting Trace Setting Configuration
Downloads: This chapterpdf (PDF - 141.0KB) | Feedback

Troubleshooting Trace Setting Configuration

Table Of Contents

Troubleshooting Trace Setting Configuration

Related Topics


Troubleshooting Trace Setting Configuration


The Troubleshooting Trace Setting window allows you to choose the services in Cisco CallManager for which you want to set predetermined troubleshooting trace settings. This chapter contains information on how to set and reset troubleshooting trace setting for specific services.


Note Leaving Troubleshooting trace enabled for a long time increases the size of the trace files and may impact the performance of the services.


Procedure


Step 1 Choose Trace > Troubleshooting Trace Settings.

Step 2 Do one of the following tasks:

To set troubleshooting trace, check the check box of the service(s) from the list of services for each node. If you want to check all services on a particular node, check the Check all Services for a Node check box under that node. If you want to check all services for all nodes, check the Check all Services for a Node check box in the services list.

Then, click the Apply Troubleshooting Traces button.


Note The services that are not activated on a Cisco CallManager node display as N/A.


To restore the original trace settings for the services in the cluster, click Reset Troubleshooting Traces.


Note The Reset Troubleshooting Traces button displays only if you have set troubleshooting trace for one or more services.



Additional Information

See the Related Topics.

Related Topics

Trace Configuration

Trace, Cisco CallManager Serviceability System Guide