Cisco Unified Communications Manager Security Guide, Release 9.1(1)
Certificate setup
Downloads: This chapterpdf (PDF - 213.0 KB) The complete bookPDF (PDF - 3.54 MB) | Feedback

Certificate setup

Certificate setup

This chapter provides information about certificate setup.

About certificate setup

Use the Certificate Configuration window to view the certificates on your system. All fields on the Certificate Configuration window are read-only, except Duration in Cache.

Find certificate

To find a certificate, perform the following procedure:

    Step 1   In Cisco Unified Communications Manager Administration, choose System > Security > Certificate.

    The Find and List Certificates window displays. Records from an active (prior) query may also display in the window.

    Step 2   To find all records in the database, ensure the dialog box is empty; go to Step 3.

    To filter or search records

    1. From the first drop-down list box, choose a search parameter.
    2. From the second drop-down list box, choose a search pattern.
    3. Specify the appropriate search text, if applicable.

      To add additional search criteria, click the + button. When you add criteria, the system searches for a record that matches all criteria that you specify. To remove criteria, click the button to remove the last added criterion or click the Clear Filter button to remove all added search criteria.

    Step 3   Click Find.

    All matching records display. You can change the number of items that display on each page by choosing a different value from the Rows per Page drop-down list box.

    Step 4   From the list of records that display, click the link for the record that you want to view.

    To reverse the sort order, click the up or down arrow, if available, in the list header.

    The window displays the item that you choose.

    Certificate settings

    All fields on the Certificate Management window are read-only, except Duration in Cache.

    Table 1 VPN Profile Configuration Settings



    Subject Name (read only)

    Displays the subject name for the certificate.

    Issuer Name (read only)

    Displays the issuer name for the certificate.

    Serial Number (read only)

    Displays the serial number (MAC address).

    IPv4 Address (read only)

    Displays the IPv4 address.

    IPv6 Address (read only)

    Displays the IPv6 address.

    Duration in Cache

    Enter the time, in hours, that the certificate can persist in the phone cache. A value of zero indicates that the certificate does not get cached. Leave blank to accept the system default value.

    Maximum: 720 hours

    Selected Roles

    Displays the roles currently associated with the certificate.

    Selected Services

    Displays the services currently associated with the certificate.