Release Notes for Cisco Unified Communications Manager, Release 9.1(1a)
Upgrading to IM and Presence 9.1(1a)
Downloads: This chapterpdf (PDF - 1.19MB) The complete bookPDF (PDF - 2.78MB) | The complete bookePub (ePub - 365.0KB) | Feedback

Upgrading to IM and Presence 9.1(1a)

Upgrading to IM and Presence 9.1(1a)

New system installation information

For new installations, you must order the IM and Presence Service system software and adhere to licensing requirements. To order the software, go to http:/​/​www.cisco.com/​en/​US/​ordering/​index.shtml or contact your Cisco sales representative.

Each IM and Presence Service shipment comes with an installation DVD, which is required for all new installations of IM and Presence Service. The IM and Presence Service operating system and application software is installed from the installation DVD. For example, for new installations of IM and Presence Service software, use the DVD that indicates this release of IM and Presence Service.


Note


If you fresh install the unrestricted version of IM and Presence Service Release 10.0(1), you will not be able to later perform a fresh install of the restricted version of this software.


System Upgrade

Supported Upgrade Paths to IM and Presence Service Release 9.1(1a)

IM and Presence Service supports the following software upgrade paths to Release 9.1(1a):

Supported Upgrade Paths from IM and Presence Service...

Installation Instructions

Release 8.0(1) through 8.6(x) and Release 9.0(1) to 9.1(1a)

Upgrades from Release 8.0(1) through 8.6(1) to Release 9.1(1a) require a Refresh Upgrade using the ciscocm.cup.refresh_upgrade_v1.01.cop.sgn file.

Upgrades from Release 8.6(2) and 8.6(3) to Release 9.1(1) require a Refresh Upgrade only.

Upgrades from Release 8.6(4), 8.6(5), and 9.0(1) to Release 9.1(1a) require a Standard Upgrade only.

Note   

For more information about Refresh Upgrades and Standard Upgrades, see the Upgrade Guide for Cisco Unified Communications Manager, Release 9.1(1).

Perform these steps to proceed with the upgrade:

  1. Go to http:/​/​www.cisco.com/​cisco/​software/​navigator.html.
  2. Navigate to Products > Voice and Unified Communications > Unified Communications Applications > Cisco Unified Presence > Cisco Unified Communications Manager IM and Presence Service Version 9.1 > Unified Presence Server (CUP) Updates-9.1(1).
  3. Download the complete ISO file: UCSInstall_CUP_9.1.1.10000-8.sgn.iso

Note


Direct upgrades from Cisco Unified Presence Release 6.0(x) to Release 9.1(1a) are not supported. You must first upgrade to at least Release 8.0(1) of Cisco Unified Presence. For more information about upgrading to Cisco Unified Presence Release 8.x, see the Release Notes for Cisco Unified Presence here: http:/​/​www.cisco.com/​en/​US/​products/​ps6837/​prod_​release_​notes_​list.html.


Upgrade from Cisco.com

Cisco does not support downloading major IM and Presence Service software releases from Cisco.com, for example, IM and Presence Service Release 9.0(1). You can download from Cisco.com upgrade-only software images that are used to upgrade from a previous major software release to a subsequent software maintenance release or point release of IM and Presence Service. For example, you can download Cisco Unified Presence Release 8.0(2) or Cisco Unified Presence Release 8.6(1) from Cisco.com.

To download this software, go to http:/​/​tools.cisco.com/​support/​downloads/​go/​Redirect.x?mdfid=278875240. You must have an account on Cisco.com to access the Software Center. The images that are posted at the Software Center require existing installations of IM and Presence Service.

Upgrade order

You must follow a specific order when upgrading Unified Communications Manager and IM and Presence Service. The order depends on the release from which you are upgrading. The preupgrade release determines the type of upgrade you must perform. There are two types of upgrades:

  • Standard Upgrade
  • Refresh Upgrade

For more information about these types of upgrades and the upgrade order that you must follow for each type, see the latest version of the Upgrade Guide for Cisco Unified Communications Manager here: http:/​/​www.cisco.com/​en/​US/​products/​sw/​voicesw/​ps556/​prod_​installation_​guides_​list.html.

Software licensing requirements for VMware

You can run this release of IM and Presence Service on a VMware virtual machine that is deployed on approved Cisco Unified Computing server hardware. For information about supported servers, see Hardware and Software Compatibility Information for IM and Presence Service on Cisco Unified Communications Manager. For information about the VMware licensing requirements, see the License Activation for Cisco Unified Communications on Cisco Unified Computing System Docwiki here: http:/​/​docwiki.cisco.com/​wiki/​License_​Activation_​for_​Cisco_​UC_​on_​UCS.

Recommendations for Release 8.0(x), 8.5(x), or 8.6(x) to 9.1(1) Upgrades

Before you upgrade from Cisco Unified Presence Release 8.0(x), 8.5(x), 8.6(x) to IM and Presence Service Release 9.1(1), Cisco strongly advises that you follow the recommended upgrade procedure in the Upgrade Guide for Cisco Unified Communications Manager, Release 9.1(1) here: http:/​/​www.cisco.com/​en/​US/​products/​sw/​voicesw/​ps556/​prod_​installation_​guides_​list.html.

Important Notes

  • Cisco Unified Presence Sync Agent Service

    Before you perform an upgrade, this service may be disabled on the cluster (which only runs on the Publisher node). This action will ensure that user-initiated changes from the corresponding Unified Communications Manager system during the upgrade do not compromise the upgrade process. The changes are reconciled when the IM and Presence Service Sync Agent is restarted in either the current or newer version.

  • Publisher node

    Switch versions and restart the publisher node before you begin a switch version and restart on the subscriber nodes. If the IM and Presence Service Administration GUI is operational on the publisher node, it is safe to initiate a switch version and restart on the subscriber node.


Note


Services on the publisher will not start until the subscribers are switched and restarted, and replication is successfully established on that cluster.


  • Contact List Size

    The default maximum value is 200; however, you can use higher value or specify the value as 0 to set it to an unlimited value. After you perform the upgrade, check that the contact list size for users has not reached the maximum value. If you have a large number of contacts per user, the number of users that an IM and Presence Service node supports is reduced.