Cisco Unified Communications Manager Managed Services Guide, Release 8.0(1)
New and Changed Information
Downloads: This chapterpdf (PDF - 610.0KB) The complete bookPDF (PDF - 17.53MB) | Feedback

New and Changed Information

Table Of Contents

New and Changed Information

Cisco Unified Communications Manager, Release 8.0(1)

Cisco Unified Serviceability

Alarm Additions and Changes

Obsolete Alarms

Cisco Unified Real-Time Monitoring Tool

Cisco Unified CDR Analysis and Reporting

New Cisco CAR DB Alarms

New CAR Object and Counters

Hunt/CTI Integration for CAR Reporting

CAR and CDRM Alarm Interface

System-Wide Call Tracking End-to-End Call Trace

Cisco Unified Call Detail Records

End-to-End Call Trace

Remote Destination to Number Mapping and CDRs

New CDR Fields to Support Call Control Discovery

New CDR Fields to Support External Call Control

New CDR Support for iSAC Codec

New CDR Fields for Hunt List Support

Cisco Unified Reporting

MIB Updates


New and Changed Information


This chapter describes new and changed information in Cisco Unified Communications Manager (Cisco Unified CM) for Release 8.0(1). It contains the following sections:

Cisco Unified Communications Manager, Release 8.0(1)

MIB Updates

For more information, refer to the latest release notes at http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_release_notes_list.html.

Cisco Unified Communications Manager, Release 8.0(1)

This section describes the new and changed information in Cisco Unified Communications Manager, Release 8.0. It contains the following subsections:

Cisco Unified Serviceability

Cisco Unified Real-Time Monitoring Tool

Cisco Unified CDR Analysis and Reporting

Cisco Unified Call Detail Records

Cisco Unified Reporting

Cisco Unified Serviceability

This section contains the following subsections:

Alarm Additions and Changes

Obsolete Alarms

Alarm Additions and Changes

Audit Log Catalog—The following new Audit Log alarms are added:

Alarm Name
Description

AdministrativeEvent

Failed to write into the primary file path. Audit Event is generated by this application. Severity level is Informational.

CriticalEvent

Failed to write into the primary file path. Audit Event is generated by this application. Severity level is Informational.

SecurityEvent

Failed to write into the primary file path. Audit Event is generated by this application. Severity level is Informational.


EM Alarm Catalog—The following new EM alarms are added:

Alarm Name
Description

EMAppInitializationFailed

EM Application not started. Error occurred while starting application. Severity level is Error.

EMAppStarted

EM Application started successfully. Severity level is Informational.

EMAppStopped

EM Application started. Application is shutting down gracefully because of an unloaded from Tomcat. Severity level is Notice.

EMCCFailedInLocalCluster

EMCC login failure occurred due to one of the following conditions:

Devices are incompatible with EMCC.

Unable to retrieve remote cluster information.

EMCC is restricted by the local cluster.

EMCC is restricted by the local cluster.

EMCCFailedInRemoteCluster

There was an EMCC login failure at a remote Unified CM. EMCC login could fail due to the following reasons:

User does not exist in any of the configured remote cluster.

User is not enabled for EMCC.

No free EMCC base device.

EMCC access was prevented by remote cluster.

Untrusted certificate received from the remote end while trying to establish a connection.

EMCCUserLoggedIn

EMCC login was successful. Severity level is Informational(6).

EMCCUserLoggedOut

EMCC logout was successful. Severity level is Informational(6).

EMServiceConnectionError

EM Service not reachable. EM Service might be down in one or more nodes in the cluster. Severity level is Error.

NodeNotTrusted

Untrusted Node was contacted. Severity level is Error.

UserInputFailure

EMCC login failure due to invalid user input due to invalid user credentials or the credentials have expired. Severity level is Warning(4).


TVS Alarm Catalog—The following new TVS alarms are added:

Alarm Name
Description

ConfigThreadChangeNotifyServerSingleFailed

Failed to allocate resources to handle configuration change notification from database.

ConfigThreadReadConfigurationFailed

Failed to retrieve enterprise parameter values from database at TVS service startup.

DefaultDurationInCacheModified

Default value of a Certificate duration in cache is modified in the Service Parameter page.

ITLFileRegenerated

New ITL File has been generated.

RollBackToPre8.0Disabled

Roll Back to Pre 8.0 has been disabled in the Enterprise Parameter page.

SDIControlLayerFailed

Failed to update trace logging or alarm subsystem for new settings.

TVSCertificateRegenerated

TVS Server certificate has been regenerated.

TVSServerListenBindFailed

Fail to connect to the network port through which file requests are received.

TVSServerListenSetSockOptFailed

Failed to increase the size of the network buffer for receiving file requests.


Call Manager Catalog—The following new Call Manager alarms are added:

Alarm Name
Description

CMVersionMismatch

One or more Unified CM nodes in a cluster are running different Cisco CallManager versions.

ConflictingDataIE

A call has been rejected because the incoming PRI/BRI Setup message had an invalid IE.

DbInfoCorrupt

Database information returned is corrupt. Database configuration error was encountered.

DbInfoError

Error in the database information retrieved. Database configuration error was encountered.

DbInfoTimeout

Database Information request timed out. Timeout was encountered while trying to read database configuration.

DbInsertValidatedDIDFailure

The Insertion of an IME provided E.164 DID has failed. A failure occurred attempting to insert a Cisco Unified Active Link learned DID.

EndPointRegistered

This alarm occurs when a device is successfully registered with Cisco Unified Communications Manager.

EndPointResetInitiated

This alarm occurs when a device is reset via the Reset button in Cisco Unified CM Administration.

EndPointRestartInitiated

Device restart initiated or Apply Config initiated on the specified device.

EndPointTransientConnection

End point transient connection attempt.

EndPointUnregistered

An endpoint that has previously registered with Cisco Unified Communications Manager has unregistered.

FirewallMappingFailure

Firewall unreachable.

IMEQualityAlertEntry

IME call quality problem.

IMEQualityAlertExit

IME call quality problem cleared.

IMEDistributedCacheInactive

Inactive IME distributed cache.

IMEOverQuota

Each IME server has a fixed quota on the total number of DIDs it can write into the IME distributed cache.

InsufficientFallbackIdentifiers

Cannot allocate fallback identifier.

InvalidSubscription

A message has been received from an IME server that contains a subscription identifier that is not handled by this node.

RouteRemoved

Route is removed automatically.

InvalidCredentials

Credential Failure to IME server.

PublicationRunCompleted

Completion of publication of published DID patterns.

PublishFailed

Unified CM attempted to store a number into the IME distributed cache, but the attempt failed. This is typically due to a transient problem in the IME distributed cache.

PublishFailedOverQuota

Each IME server has a fixed quota on the total number of DIDs it can write into the IME distributed cache.

RejectedRoutes

Rejected route due to Untrusted status.

TCPSetupToIMEFailed

Connection Failure to IME server.

TLSConnectionToIMEFailed

TLS Failure to IME service.

New SAF and CCD Alarms

LostConnectionToSAFForwarder

Connection to the SAF Forwarder has been lost.

SAFForwarderError

SAF Forwarder error response sent to Unified CM.

SAFUnknownService

Unified CM does not recognize the service ID in a publish revoke or withdraw message.

SAFPublishRevoke

A CLI command revoked the publish action for the specified service or subservice ID.

SAFResponderError

This is raised when SAF forwarder doesn't know the transaction ID within SAF response from this Cisco Unified CM.

DuplicateLearnedPattern

This alarm occurs when CCD requesting service received a duplicate Hosted DN.

CCDIPReachableTimeOut

CCD Requesting Service IP Reachable Duration times out.

CCDPSTNFailOverDurationTimeOut

The internal limit on PSTN failover has expired.

CCDPSTNFailOverDurationTimeOut

CCD has reached the maximum number of learned patterns allowed.

New Alarms in External Call Control

ConnectionFailureToPDP

A connection request from Unified CM to the policy decision point (PDP) failed.

ConnectionToPDPInService

A connection was successfully established between Cisco Unified Communications Manager (Unified CM) and the policy decision point (PDP).

AwaitingResponseFromPDPTimeout

Cisco Unified Communication Manager timed out waiting for the routing response from the policy decision point.

ErrorParsingResponseFromPDP

Cisco Unified Communications Manager failed to parse one or multiple optional elements or attributes in the call routing response from the policy decision point.

ErrorParsingDirectiveFromPDP

Cisco Unified Communications Manager (Unified CM) failed to parse the call routing directive or the diversion destination in the call routing response from the policy decision point (PDP).

FailureResponseFromPDP

The policy decision point (PDP) returned a 4xx (client) or 5xx (server) status code in the HTTP response.

CallAttemptBlockedByPolicy

A call was attempted but blocked or rejected by the policy decision point (PDP).

FailedToFulfillDirectiveFromPDP

Cisco Unified Communications Manager cannot fulfill the call routing directive returned by the PDP.

DigitAnalysisTimeoutAwaitingResponse

Cisco Unified Communications Manager sent a routing request to the policy decision point but the request timed out without a response.


Changed Alarms in Call Manager Catalog

The following existing CallManager alarms are updated:

Alarm Names
Alarm Changes

AnnunciatorNoMoreResourcesAvailable

Severity changed from Error to Warning

BChannelISV

Severity changed from Informational to Notice.

BChannelOOS

Severity changed from Error to Critical.

BeginThrottlingCallListBLFSubscriptions

Severity level is Warning.

CMInitializationStateTime

Severity level is Informational.

CMOverallInitTimeExceeded

Severity changed from Error to Alert.

CMTotalInitializationStateTime

Severity level is Informational.

CallManagerFailure

Severity changed from Error to Critical;

Enum Definitions are updated.

CallManagerOnline

Severity level is Notice.

CodeRedEntry

Severity changed from Error to Critical.

CodeYellowEntry

Severity changed from Error to Critical.

CodeYellowExit

Severity changed from Error to Notice.

ConferenceNoMoreResourcesAvailable

Changed severity level from Error to Warning.

ConnectionFailure

Severity level is Error (3).

DBLException

Severity changed from Error to Alert.

DChannelISV

Severity changed from Informational to Notice

DChannelOOS

Severity changed from Error to Critical.

DaTimeOut

Severity changed from Error to Warning.

DatabaseDefaultsRead

Severity changed from Notice to Informational.

DeviceApplyConfigInitiated

Severity level is Informational.

DeviceCloseMaxEventsExceeded

Severity level is Error (3).

DeviceDnInformation

Severity level is Informational (6).

DeviceInitTimeout

Severity level is Error (3)

DevicePartiallyRegistered

Following information is updated:

Enum Definitions for performance monitor object type

Enum Definitions for DeviceType

DeviceRegistered

Following information is updated:

Enum Definitions for Performance Monitor ObjType

Enum Definitions for Device type

Enum Definitions for IPAddrAttributes

Enum Definitions for IPV6AddrAttributes

DeviceResetInitiated

Enum Definitions for DeviceType are updated.

Parameters added: Product type [String]

DeviceRestartInitiated

Enum Definitions for DeviceType are updated.

Parameters added: Product type [String]

DeviceTransientConnection

Severity changed from Error to Warning.

Following information is updated:

Enum Definitions for DeviceType

Enum Definitions

Enum Definitions for IPAddrAttributes

Enum Definitions for IPV6AddrAttributes

DeviceTypeMismatch

Following information is updated:

Enum Definitions for DBDeviceType

Enum Definitions for DeviceType

DeviceUnregistered

Severity changed from Error to Warning.

Following information is updated:

Enum Definitions for DeviceType

Enum Definition

Enum Definitions for IPAddrAttributes

Enum Definitions for IPV6AddrAttributes

EndThrottlingCallListBLFSubscriptions

Severity changed from Warning to Informational.

H323Started

Severity changed from Informational to Notice.

Following information is updated:

Parameters

Enum Definitions for DeviceType

H323Stopped

Following information is updated:

Parameters

Enum Definitions for DeviceType

ICTCallThrottlingEnd

Severity changed from Error to Notice.

ICTCallThrottlingStart

Severity level is Error (3).

MGCPGatewayGainedComm

Severity changed from Informational to Notice.

MaliciousCall

Severity changed from Informational to Warning.

MaxCallDurationTimeout

Severity changed from Informational to Notice.

Following parameters added:

Originating Device name(String)

Destination Device name(String)

Call start time(UInt)

Call stop time(UInt)

Calling Party Number(String)

Called Party Number(String)

MaxCallsReached

Severity changed from Error to Critical.

MaxHoldDurationTimeout

Following parameters added:

Originating Device Name(String)

Destination Device Name(String)

Hold start time(UInt)

Hold stop time(UInt)

Calling Party Number(String)

Called Party Number(String)

MediaResourceListExhausted

Enum Definitions for MediaResourceType is updated.

MohNoMoreResourcesAvailable

Severity changed from Error to Warning.

MtpNoMoreResourcesAvailable

Severity changed from Error to Warning.

Media Resource List Name parameter added.

MultipleSIPTrunksToSamePeerAndLocalPort

Severity level is Error.

NoFeatureLicense

Severity changed from Error to Emergency.

NotEnoughChans

Severity changed from Error to Warning.

Device Name(String) is the only parameter.

NumDevRegExceeded

Severity level is Error (3).

PktCapOnDeviceStarted

Severity level is Informational (6).

PktCapOnDeviceStopped

Severity level is Informational (6).

PktCapServiceStarted

Severity level is Informational (6).

PktCapServiceStopped

Severity level is Informational (6).

RouteListExhausted

Severity level is Warning.

RsvpNoMoreResourcesAvailable

Media Resource List Name(String) parameter is added.

SDLLinkISV

Severity changed from Informational to Notice.

SDLLinkOOS

Severity changed from Error to Alert.

SIPLineRegistrationError

Severity changed from Error to Warning.

Enum Definitions for DeviceType are updated.

Enum Reasons table is updated

SIPStarted

Severity changed from Informational to Notice.

Enum Definitions for InTransportType and OutTransportType are updated

SIPStopped

Enum Definitions for InTransportType and OutTransportType are updated.

StationAlarm

Severity level is Informational (6).

StationConnectionError

Reason Code[Enum] parameter added.

Enum Definitions for Reason Code table added.

StationEventAlert

Severity changed from Error to Warning.

StationTCPInitError

Severity changed from Error to Critical.

Following parameters are removed:

Error Number [String]

ErrorCode [Int]

TimerThreadSlowed

Severity changed from Warning to Critical.

UserUserPrecedenceAlarm

Severity changed from Error to Warning.

Enum definitions updated.


CDRRep Alarm Catalog—The following existing CDRRep alarms are updated:

Alarm Name
Alarm Changes

CDRAgentSendFileFailed

Changed Data Collector Routing List element to Alert Manager.

CDRAgentSendFileFailureContinues

Severity level is Error (3).

CDRFileDeliveryFailed

Changed Data Collector Routing List element to Alert Manager.

CDRFileDeliveryFailureContinues

Severity level is Error (3).

CDRHWMExceeded

Changed Data Collector Routing List element to Alert Manager.

CDRMaximumDiskSpaceExceeded

Facility and sub-facility changed. Added Routing List and changed Data Collector to Alert Manager.


Certificate Monitor Alarm Catalog—The following new Certificate Monitor alarms are added:

Alarm Name
Description

CertValidLessthanADay

Certificate is about to expire in less than 24 hours or has expired.

CertValidfor7days

Alarm indicates that the certificate has expired or expires in less than seven days.

CertValidityOver30Days

Alarm indicates that the certificate expiry is approaching but the expiry date is more than 30 days.

CertValidLessThanMonth

Alarm indicates that the certificate will expire in 30 days or less.


CMI Alarm Catalog—The following new CMI alarms are added:

Alarm Name
Description

CMIException

Error while reading the database.

CMIServiceStatus

CMI service is running and working properly.

DBLException

Unable to connect to the database.

InvalidPortHandle

The handle for the opened serial port is invalid.

MemAllocFailed

CMI tried to allocate memory and failed.

ParityConfigurationError

The CMI service parameter, Parity, has an invalid configuration.

ReadingFileFailure

CMI failed to read SMDI messages from the serial port.

SMDICmdError

CMI receives an invalid incoming SMDI message.

SMDIMessageError

SMDI message contains invalid DN.

SerialPortGetStatusError

When CMI tries to get the status of serial port, the operating system returns an error.

SerialPortOpeningError

When CMI tries to open the serial port, the operating system returns an error.

SerialPortSetStatusError

When CMI tries to set the status of serial port, the operating system returns an error.

StopBitConfigurationError

The Cisco Messaging Interface service parameter, Stop Bits, has an invalid configuration.

ThreadKillingError

An error occurred when CMI tried to stop the CMI service.

UnknownException

Unknown error while connecting to database.

VMDNConfigurationError

The Voice Mail DN for CMI is invalid.

WritingFileFailure

CMI failed to write SMDI messages to the serial port.


CTI Manager Alarm Catalog—The following new CTI Manager alarms are added:

Alarm Name
Description

ApplicationConnectionDropped

Application has dropped the connection to CTIManager.

ApplicationConnectionError

CTIManager is unable to allow connections from Applications.

CtiDeviceClosed

Application closed a device.

CtiDeviceInService

Device is back in service.

CtiDeviceOpenFailure

Application is unable to open the device.

CtiDeviceOpened

Application opened a device.

CtiDeviceOutofService

Device is out of service.

CtiIncompatibleProtocolVersion

Incompatible protocol version.

CtiLineClosed

Application closed the line.

CtiLineInService

Line is back in service.

CtiLineOpenFailure

Application is unable to open the line.

CtiLineOpened

Application opened the line.

CtiLineOpened

Line is out of service.

CtiMaxConnectionReached

Maximum number of CTI connections has been reached, no new connection will be accepted unless an existing connection is closed.

CtiProviderCloseHeartbeatTimeout

CTI heartbeat timeout occurred causing CTIManager to close the application connection.

CtiProviderClosed

CTI application closed the provider. The IP address is shown in either IPv4 or IPv6 format depending on the IP addressing mode of the application.

CtiProviderOpenFailure

CTI application is unable to open the provider. The IP address is shown in either IPv4 or IPv6 format depending on the IP addressing mode of the application.

CtiProviderOpened

CTI Application opened the provider successfully. The IP address is shown in either IPv4 or IPv6 format depending on the IP addressing mode of the Application.

CtiQbeFailureResponse

The requested operation from the application could not be performed because of a normal or abnormal condition.

InvalidQBEMessage

QBE PDU from application is invalid.

MaxDevicesPerNodeExceeded

An application has opened more devices than the limit set in the CTIManager service parameter, Maximum Devices Per Node.

MaxDevicesPerProviderExceeded

An application has opened more devices than the limit set in the CTIManager service parameter, Maximum Devices Per Provider.

RedirectCallRequestFailed

CTIManager is unable to redirect a call.

UnableToRegisterwithCallManagerService

CTI cannot communicate with Cisco CallManager service to register supplementary service features.

UnableToSetorResetMWI

An error occurred when setting the message waiting indication (MWI) lamp.


DB Alarm Catalog—The following existing DB alarms are updated:

Alarm Name
Alarm Changes

ErrorChangeNotifyClientBlock

Changed severity level to Critical from Error.

ErrorReadingInstalledRPMS

Severity level is Error (3).

IDSEngineCritical

Changed severity level to Error from Critical.

IDSEngineDebug

Changed severity level to Informational from Debug.

IDSReplicationInformation

Severity level is Informational.


DRF Alarm Catalog—The following new DRF alarms are added:

-DRFBackupCompleted—DRF backup completed successfully.

-DRFLocalDeviceError—DRF unable to access local device.

-DRFNoBackupTaken—A valid backup of the current system was not found after an Upgrade, Migration, or Fresh Install.

-DRFRestoreCompleted—DRF restore completed successfully.

IMS Alarm Catalog—The following existing IMS alarms are updated:

Alarm Name
Alarm Changes

AdminPassword

Severity level is Informational.

authAdminLock

Severity level is Warning (4).

authExpired

Added Routing List element and updated the parameter list.

authFail

Changed severity level from Notice to Warning.

authHackLock

Updated the parameter list.

authInactiveLock

Updated the parameter list.

authLdapInactive

Severity level is Warning (4).

authMustChange

Parameter list is updated.

Routing List element is added.

authSuccess

Severity level is Informational (6).

credFullUpdateFailure

Severity level is Informational (6).

credFullUpdateSuccess

Severity level is Informational (6).

credReadFailure

Changed severity level to Notice from Informational. Updated parameter list and added Routing List element.

credReadSuccess

Severity level is Informational (6).

credUpdateFailure

Severity level is Informational (6).

credUpdateSuccess

Severity level is Informational (6).


IpVms Alarm Catalog—The following new IpVms alarm is added:

-kANNAudioFileMissing—Announcement file not found. The annunciator was unable to access an announcement audio file. This may be caused by not uploading a custom announcement to each server in the cluster or a locale has not been installed on the server.

Changed Alarms in IpVms Alarm Catalog

The following existing IpVms alarms are updated:

Alarm Name
Alarm Changes

ANNDeviceRecoveryCreateFailed

Added Routing List elements and Parameters.

CFBDeviceRecoveryCreateFailed

Added Routing List elements and Parameters.

MOHDeviceRecoveryCreateFailed

Severity changed from Error to Warning.

MTPDeviceRecoveryCreateFailed

Changed severity level from Error to Warning and added existing Routing List elements and Parameters.

SoftwareLicenseNotValid

Severity changed from Error to Warning.

SoftwareLicenseValid

Severity—Informational.

kANNAudioCreateDirFailed

Severity changed from Error to Warning.

Parameter list updated.

kANNAudioUndefinedAnnID

Severity changed from Error to Warning.

Parameter list removed.

kANNAudioUndefinedLocale

Severity changed from Error to Warning.

Parameter list is updated.

kANNDeviceRecordNotFound

Severity changed from Warning to Error.

kANNDeviceStartingDefaults

Severity changed from Informational to Warning.

Parameter list added.

kANNICMPErrorNotification

Parameter list updated.

kCFBDeviceRecordNotFound

Severity changed from Informational to Error.

kCFBDeviceStartingDefaults

Severity changed from Informational to Warning.

New parameters added:

Parameter Name(String)

Value Used(String)

kCFBICMPErrorNotification

Following parameters are removed:

Call ID [ULong] Party ID [ULong] IP Port [ULong]

kChangeNotifyServiceCreationFailed

Severity changed from Error to Warning.

Following parameters added:

OS Error Code(Int)

OS Error Description(String)

kChangeNotifyServiceGetEventFailed

Severity changed from Error to Warning.

Following parameters added:

OS Error Code(Int

OS Error Description(String)

kChangeNotifyServiceRestartFailed

Severity changed from Error to Warning.

Following parameters added:

OS Error Code(Int)

OS Error Description(String)

kCreateAudioSourcesFailed

Following parameters added:

OS Error Code(Int)

OS Error Description(String)

kCreateControlFailed

Following parameters added:

OS Error Code(Int)

OS Error Description(String)

kDeviceDriverError

Severity changed from Error to Warning.

kDeviceMgrCreateFailed

Severity changed from Error to Warning.

kDeviceMgrExitEventCreationFailed

Severity changed from Error to Warning.

kDeviceMgrLockoutWithCallManager

Severity changed from Error to Informational.

kDeviceMgrMoreThan50SocketEvents

Severity changed from Informational to Notice.

kDeviceMgrOpenReceiveFailedOutOfStreams

Severity changed from Error to warning.

kDeviceMgrRegisterKeepAliveResponseError

Severity changed from Error to Warning.

kDeviceMgrRegisterWithCallManager

Severity level is Informational (6).

kDeviceMgrRegisterWithCallManagerError

Severity changed from Error to Warning.

kDeviceMgrSocketDrvNotifyEvtCreateFailed

Severity changed from Error to Warning.

kDeviceMgrSocketDrvNotifyEvtCreateFailed

Severity changed to Warning from Error.

kDeviceMgrStartTransmissionOutOfStreams

Severity changed from Error to Warning.

kDeviceMgrThreadWaitFailed

Severity changed from Error to Informational.

Following parameters added:

OS Error Code [Int]

OS Error Description [String]

kDeviceMgrThreadxFailed

Severity changed from Error to Warning.

Following parameters added:

OS Error Code[Int]

OS Error Description [String]

kDeviceMgrUnregisterWithCallManager

Severity level is Informational (6).

kFixedInputCodecStreamFailed

Severity changed from Error to Warning.

Following parameters removed:

Audio Source ID [ULong]

System error code [ULong]

kFixedInputCreateControlFailed

Severity changed from Error to Warning.

Audio Source ID [ULong] parameter is removed.

kFixedInputCreateSoundCardFailed

Severity changed from Error to Warning.

Audio Source ID [ULong] parameter is removed

kFixedInputInitSoundCardFailed

Severity changed from Error to Warning.

Following parameters are removed:

Audio Source ID [ULong]

System error code [ULong]

kFixedInputTranscoderFailed

Severity changed from Error to Warning.

Following parameters are removed:

Audio Source ID [ULong

System error code [ULong]

kGetFileNameFailed

Severity changed from Error to Warning.

Audio Source ID [ULong] parameter is removed.

kIPVMSDeviceDriverNotFound

This alarm is available in 8.0(1).

kIPVMSMgrEventCreationFailed

Severity changed from Error to Warning.

kIPVMSMgrThreadxFailed

Severity changed from Error to Warning.

kIPVMSMgrWrongDriverVersion

Following parameters are removed:

Found [ULong]

Need [ULong]

kIPVMSStarting

ProcessID [ULong] parameter is removed.

kIPVMSStopping

ProcessID [ULong] parameter is removed.

kIpVmsMgrNoLocalHostName

Severity level is Error (3).

kIpVmsMgrNoLocalNetworkIPAddr

Severity level is Error (3).

kIpVmsMgrThreadWaitFailed

Severity changed from Error to Warning.

kMOHBadMulticastIP

Severity changed to Warning from Error.

Following parameters are removed:

Audio Source ID [ULong]

Call/Conference ID [ULong]

Multicast IP Port [ULong]

kMOHDeviceRecordNotFound

Severity changed from Informational to Warning.

kMOHICMPErrorNotification

Following parameters are removed:

Call ID [ULong] Party ID [ULong] IP Port [ULong]

kMOHMgrCreateFailed

Severity changed from Error to Warning.

OS Error Description(String) parameter is added.

kMOHMgrExitEventCreationFailed

Severity changed from Error to Warning.

kMOHMgrIsAudioSourceInUseThisIsNULL

Severity level is Informational (6).

kMOHMgrThreadWaitFailed

Severity changed from Error to Informational.

OS Error Description(String) parameter is added.

kMOHMgrThreadxFailed

Severity changed from Error to Warning.

OS Error Description(String) parameter is added

kMOHRewindStreamControlNull

Severity changed from Error to Informational.

Audio Source ID [ULong] parameter is removed.

kMOHRewindStreamMediaPositionObjectNull

Severity changed from Error to Informational.

Audio Source ID [ULong] parameter is removed.

kMOHTFTPGoRequestFailed

Following parameters added:

Error Description [String] Source Path [String]
Destination Path [String] OS Error Code [Int]
OS Error Description [String]

kMTPDeviceRecordNotFound

Severity changed from Informational to Warning.

kMTPDeviceStartingDefaults

MTP Run Flag(String) parameter is added.

kPWavMgrThreadxFailed

Severity level is Error (3).

kReadCfgIpTosMediaResourceToCmNotFound

Severity level is Informational (6).

kReadCfgMOHEnabledCodecsNotFound

Severity level is Informational (6).

kReadCfgUserLocaleEnterpriseSvcParm

Severity level is Error (3).

kRequestedANNStreamsFailed

Following parameters are removed:

Requested streams [ULong] Allocated streams [ULong]

kRequestedCFBStreamsFailed

Severity changed from Error to Warning.

kRequestedMOHStreamsFailed

Severity changed from Error to Warning.

kRequestedMTPStreamsFailed

Severity changed from Error to Warning.


JavaApplications Alarm Catalog—The following new JavaApplications alarms are added:

-CiscoHardwareLicenseInvalid—Installation on invalid or obsolete hardware. Cannot upload license files.

-CiscoLicenseFileInvalid—License File is invalid.

Changed Alarms in JavaApplications Alarm Catalog

The following existing JavaApplications Alarms are updated:

-IPMAFilteringDown—Severity level is Error (3).

-WDStopped—Severity changed from Alert to Warning.

Login Alarm Catalog—The following existing Login Alarm is updated:

-AuthenticationFailed—Severity Changed from Error to Warning.

LpmTct Alarm catalog—The following existing Login Alarms are updated:

Alarm Name
Description

CoreDumpFileFound

Severity level is Critical.

LogCollectionJobLimitExceeded

Severity changed from Informational to Warning.

LogFileSearchStringFound

Severity level is Informational.

LogPartitionHighWaterMarkExceeded

Severity changed from Error to Critical.

LogPartitionLowWaterMarkExceeded

Severity changed from Error to Warning.

SparePartitionHighWaterMarkExceeded

Severity changed from Error to Warning.

Note Spare Partition is not used for Intercompany Media Engine server. So this alert will not be triggered for Intercompany Media Engine

SparePartitionLowWaterMarkExceeded

Severity level is Error (3).

Note Spare Partition is not used for Intercompany Media Engine server. So this alert will not be triggered for Intercompany Media Engine


RTMT Alarm Catalog—The following new RTMT alarms are added:

-RTMT_ALERT—A Real-Time Monitoring Tool (RTMT) process in the AMC service uses the alarm mechanism to facilitate delivery of RTMT alerts in the RTMT AlertCentral or through email.

SystemAccess Alarm catalog—The following existing System Access Alarms are updated:

-TotalProcessesAndThreadsExceededThresholdEnd—Severity changed from Informational to Notice.

TFTP Alarm catalog—The following existing TFTP Alarms are updated:

Alarm Name
Description

CNFFBuffWriteToFilefopenfailed

Severity changed from Informational to Error.

CNFFBuffWriteToFilefwritefailed

Severity changed from Informational to Error.

ConfigItAllBuildFilesFailed

Severity changed from Informational to Error.

ConfigItAllReadConfigurationFailed

Severity changed from Informational to Error.

ConfigThreadBuildFileFailed

Severity changed from Informational to Error.

ConfigThreadCNCMGrpBuildFileFailed

Severity changed from Informational to Error.

ConfigThreadCNGrpBuildFileFailed

Severity changed from Informational to Error.

ConfigThreadChangeNotifyServerInstanceFailed

Severity changed from Error to Alert.

ConfigThreadChangeNotifyServerSingleFailed

Severity changed from Error to Alert.

ConfigThreadChangeNotifyServerStartFailed

Severity changed from Error to Alert.

ConfigThreadReadConfigurationFailed

Severity changed from Informational to Error.

CreateThreadFailed

Severity changed from Error to Alert.

NoCallManagerFound

Severity changed from Error to Warning.

SDIControlLayerFailed

Severity changed from Critical to Alert.


For more information on alarms, see Cisco Unified Serviceability Alarms and CiscoLog Messages, page 6-1.

Obsolete Alarms

The following alarms are obsoleted in this release:

Call Manager Catalog

ConferenceCreated

ConferenceDeleted

CtiCallAcceptTimeout

CtiStaleCallHandle

DatabaseAuditInfo_074

DatabaseDeviceNoDirNum

DatabaseInternalDataError_06e

DatabaseInternalDataError_06f

DatabaseInternalDataError_070

DatabaseInternalDataError_071

DatabaseInternalDataError_072

DatabaseInternalDataError_073

DatabaseInternalDataError_075

DnTimeout

GatewayAlarm

H323AddressResolutionError

H323CallFailureAlarm

MWIParamMisMatch

NoConnection

OutOfDnForAutoRegistration

PktCapDownloadFailed

PktCapDownloadOK

PktCapLoginFailed

PktCapLoginOK

Redirection

SIP IPPortConflict

ThrottlingSampleActivity

TotalCodeYellowEntry

CertMonitor Alarm Catalog

CertExpired

CertExpiryApproaching

CertExpiryDebug

CertExpiryError

CMI Alarm Catalog

CCMConnectionError

CMIDebugAlarm

CMIServiceStarted

CMIServiceStopped

COMException

ConfigParaNotFound

DisconnectionToCCM

WSAStartupFailed

CTI Manager Alarm Catalog

kCtiDeviceOpenFailAccessDenied

kCtiDirectoryLoginFailure

kCtiEnvProcDevListRegTimeout

kCtiExistingCallNotifyArrayOverflow

kCtiIllegalEnumHandle

kCtiIllegalFilterSize

kCtiIllegalQbeHeader

kCtiInvalidQbeSizeAndOffsets

kCtiLineCallInfoResArrayOverflow

kCtiLineOpenFailAccessDenied

kCtiMYTCPSendError

kCtiMytcpErrSocketBroken

kCtiNewCallNotifyArrayOverflow

kCtiNullTcpHandle

kCtiProviderOpenInvalidUserNameSize

kCtiQbeLengthMisMatch

kCtiQbeMessageTooLong

kCtiSdlErrorvException

kCtiSsRegisterManagerErr

kCtiTcpInitError

kCtiUnknownConnectionHandle

DB Alarm Catalog

ErrorChangeNotifyReconcile

IpVms Alarm Catalog

kANNAudioComException

kANNAudioOpenFailed

kANNAudioTftpFileMissing

kANNAudioTftpMgrCreate

kANNAudioTftpMgrStartFailed

kANNAudioThreadException

kANNAudioThreadWaitFailed

kANNAudioThreadxFailed

kANNAudioXmlLoadFailed

kANNAudioXmlSyntax

kAddIpVmsRenderFailed

kCfgListComException

kCfgListDblException

kCfgListUnknownException

kCreateGraphManagerFailed

kDeviceMgrThreadException

kDownloadMOHFileFailed

kFixedInputAddAudioCaptureDeviceFailed

kFixedInputAddG711AlawIpVmsRenderFailed

kFixedInputAddG711UlawIpVmsRenderFailed

kFixedInputAddG729IpVmsRenderFailed

kFixedInputAddMOHEncoderFailed

kFixedInputAddWideBandIpVmsRenderFailed

kFixedInputAudioCapMOHEncoderConnFailed

kFixedInputAudioCaptureCreateFailed

kFixedInputClassEnumeratorCreateFailed

kFixedInputCreateGraphManagerFailed

kFixedInputFindAudioCaptureDeviceFailed

kFixedInputGetEventNotificationFailed

kFixedInputGetFileNameFailed

kFixedInputGetG711AlawIpVmsRendInfFailed

kFixedInputGetG711AlawIpVmsRenderFailed

kFixedInputGetG711UlawIpVmsRendInfFailed

kFixedInputGetG711UlawIpVmsRenderFailed

kFixedInputGetG729IpVmsRendInfFailed

kFixedInputGetG729IpVmsRenderFailed

kFixedInputGetMOHEncoderFailed

kFixedInputGetMediaControlFailed

kFixedInputGetMediaPositionFailed

kFixedInputGetWideBandIpVmsRendInfFailed

kFixedInputGetWideBandIpVmsRenderFailed

kFixedInputMOHEncG711AlawRenderConnFail

kFixedInputMOHEncG711UlawRenderConnFail

kFixedInputMOHEncG729RenderConnFailed

kFixedInputMOHEncWidebandRenderConnFail

kFixedInputSetNotifyWindowFailed

kGetEventNotificationFailed

kGetIpVmsRenderFailed

kGetIpVmsRenderInterfaceFailed

kGetMediaControlFailed

kGetMediaPositionFailed

kMOHFilterNotifyError

kMOHMgrThreadCreateWindowExFailed

kMOHPlayStreamControlNull

kMOHPlayStreamMediaControlObjectNull

kMOHThreadException

kMTPICMPErrorNotification

kPWavMgrExitEventCreateFailed

kPWavMgrThreadException

kReadCfgANNComException

kReadCfgANNDblException

kReadCfgANNListComException

kReadCfgANNListDblException

kReadCfgANNListUnknownException

kReadCfgANNUnknownException

kReadCfgCFBComException

kReadCfgCFBDblException

kReadCfgCFBListComException

kReadCfgCFBListDblException

kReadCfgCFBListUnknownException

kReadCfgCFBUnknownException

kReadCfgDblGetChgNotifyFailed

kReadCfgDblGetNodeNameFailed

kReadCfgEnterpriseComException

kReadCfgEnterpriseDblException

kReadCfgEnterpriseException

kReadCfgEnterpriseUnknownException

kReadCfgMOHAudioSourceComException

kReadCfgMOHAudioSourceDblException

kReadCfgMOHAudioSourceUnknownException

kReadCfgMOHComException

kReadCfgMOHDblException

kReadCfgMOHListComException

kReadCfgMOHListDblException

kReadCfgMOHListUnknownException

kReadCfgMOHServerComException

kReadCfgMOHServerDblException

kReadCfgMOHServerUnknownException

kReadCfgMOHTFTIPAddressNotFound

kReadCfgMOHUnknownException

kReadCfgMTPComException

kReadCfgMTPDblException

kReadCfgMTPListComException

kReadCfgMTPListDblException

kReadCfgMTPListUnknownException

kReadCfgMTPUnknownException

kRenderFileFailed

kSetNotifyWindowFailed

Test Alarm Catalog

TestAlarmWindows

Cisco Unified Real-Time Monitoring Tool

This section contains the following subsections:

New Perfmon Counters

New Perfmon Counters

New perfmon counters are added for the following objects:

Cisco CallManager External Call Control—This feature provides information about the counters that are added to support the External Call Control feature. Table 2-1 contains information about the External Call Control counters.

Table 2-1 Cisco CallManager External Call Control

Counters
Counter Description

Cisco CallManager Object

ExternalCallControlEnabledCallsAttempted

This counter specifies the total number of calls to devices that have the External Call Control feature enabled. This is a cumulative count of all calls to intercept-enabled patterns or DNs since the last restart of the Cisco CallManager service.

ExternalCallControlEnabledCallsCompleted

This counter specifies the total number of calls that were connected to a device that had the External Call Control feature enabled. This is a cumulative count of all calls to intercept-enabled patterns or DNs since the last restart of the Cisco CallManager service.

ExternalCallControlEnabledFailureTreatmentApplied

This counter specifies the total number of calls that were cleared or routed based on failure treatments (such as Allow or Deny) that are defined in the External Call Control profile.

External Call Control Objects

PDPServersTotal

This counter defines the total number of PDP servers in all External Call Control Profiles configured in Cisco Unified CM Administration. This counter increments when a new PDP server is added and decrements when a PDP server is removed.

PDPServersInService

This counter defines the total number of in-service (active) PDP servers.

PDPServersOutOfService

This counter defines the total number of times that PDP servers have transitioned from in-service to out-of-service. This is a cumulative count of out-of-service PDP servers since the last restart of the Cisco CallManager service.

ConnectionsActiveToPDPServer

This counter specifies the total number of connections that Cisco Unified Communications Manager has established (currently active) with PDP servers.

ConnectionsLostToPDPServer

This counter specifies the total number of times that active connections between Cisco Unified Communications Manager and the PDP servers were disconnected. This is a cumulative count since the last restart of the Cisco CallManager service.


Cisco CallManager SAF—The Cisco SAF Client object provides information about SAF counters that are specific to each node. Table 2-2 contains information about Cisco  SAF Client object counters.

Table 2-2 Cisco CallManager SAF Client Object

Counters
Counter Description

SAFConnectionsSucceeded (range from 0 to 2)

Total number of SAF client connections currently active on this Unified CM node.

SAFFConnectionsFailed (range from 0 to 2)

Total number of SAF client connections that failed on the Unified CM node. A failed connection is a connection that did not register with the SAF Forwarder.



Note A Cisco Unified CM node restart causes a counter reset.


Cisco Extension Mobility—The Cisco Extension Mobility object provides information about the extension mobility application. Table 2-3 contains information about the newly added Cisco Extension Mobility counters.

Table 2-3 Cisco Extension Mobility Application 

Counters
Counter Description

Total Number of EMCC Messages

This represents the total number of messages related to EMCC Requests that came from remote clusters.

Number of Remote Devices

This represents the total number of devices from other clusters that are currently using a EMCC Base Device (EMCC Logged in).

Number of Unknown Remote Users

This represents the total number of users who were not found in any of the remote cluster during inter-cluster extension mobility login.

Active Inter-cluster Sessions

This represents the total number of inter cluster Extension Mobility requests that are currently in progress.

Total Number of Remote Users

This represents the total number of users from other cluster who use a local device of this cluster and have logged into a remote cluster.

EMCC Check User Requests Handled

This represents the total number of EMCC check user requests that came from remote clusters.


Cisco Feature Control Policy—The Cisco Feature Control feature provides information about the two new counters for TFTP. Table 2-4 contains information about the newly added Cisco Feature Control Policy feature counters.

Table 2-4 Cisco Feature Control Policy

Counters
Counter Description

BuildFeaturePolicyCount

Indicates the number of built FCP files

FeaturePolicyChangeNotifications

Indicates the number of sent FCP change notifications


Cisco IME Server—The Cisco IME Server provides information about the Performance Object and Counters for IME.

The following contains the Performance Object for Cisco IME Server:

VAPStatus (range from 0 to 2)—This flag indicates the overall health of the connection to the IME servers for a particular IME service. If 1, it means that Unified CM has successfully established a connection to its primary and, if configured, backup servers for the IME service. 2 = Unhealthy.

0 = Unknown.

The following contains the Performance Counters for Cisco IME Server. Table 2-5 contains information about the Performance Counters for Cisco IME Server.

Table 2-5 Cisco IME Server

Counters
Counter Description

PublishedRoutes

Total number of DIDs published successfully into the DHT across all IME services. It is a dynamic measurement, and as such, gives you an indication of your own provisioned usage in addition to a sense of how successful the system has been in storing them into the network.

RejectedRoutes

Number of learned routes which were rejected because the number or domain were blacklisted by the administrator. This provides an indication of the number of 'missed opportunities' - cases where a VoIP call could happen in the future, but will not due to the blocked validation.

LearnedRoutes

Total number of distinct phone numbers which have been learned by IME and are present as routes in Unified CM's routing tables. If this number grows too large, it may exceed the per-cluster limit, and require additional clusters for scale.

UniqueDomains

Number of unique domain names of peer enterprises discovered by IME. It is an indicator of overall usage of the system.

FailedB2BLinkSetups

Total number of call attempts for which a IME route was available, but which were set up through the PSTN due to a failure to connect to the target over the IP network.

B2BLinkCallsAttempted

Number of calls initiated by UCM through IME. This includes calls that are accepted, as well as busy, no-answer and failed calls. The metric is strictly on initiation.

B2BLinkCallsSetup

Number of IME calls successfully placed by Unified CM and answered by the remote party, resulting in an IP call.

FailedFallbackCalls

Total number of failed fallback attempts.

e164 DIDs Learned

Number of DIDs learned from the IME server.

B2BLinkCallsAccepted

Number of IME calls successfully received by UCM and answered by the called party, resulting in an IP call.

B2BLinkCallsReceived

Number of calls received by Unified CM through IME. This includes calls that are accepted, as well as busy, no-answer and failed calls. The metric is strictly on initiation.


For more information, see the Cisco Unified Real-Time Monitoring Tool Administration Guide.

Cisco Unified CDR Analysis and Reporting

The functionality of Call Detail Records (CDR) Analysis and Reporting (CAR) is primarily to generate reports on Unified CM users and system status with respect to call processing records that are loaded to CAR database. CAR also does some CAR database management activities. CAR automatically schedules required tasks to take place or you can manually perform the tasks by using the web interface.

This section contains the following subsections:

New Cisco CAR DB Alarms

New CAR Object and Counters

Hunt/CTI Integration for CAR Reporting

CAR and CDRM Alarm Interface

System-Wide Call Tracking End-to-End Call Trace

New Cisco CAR DB Alarms

New alarms for the CAR DB instance separation get added in this release. A new thread of [CARIDSAlarm] gets created in the existing CAR Scheduler Service to receive the IDS alarms. There are four new categories and alarms with information specific to the IDS based on the class IDs.

The following new alarms support the CAR database instance:

CARIDSEngineDebug—Indicates debug events from CAR IDS database engine. This alarm provides low-level debugging information from CAR IDS database engine. System administrator can disregard this alarm. Severity level is Debug(7).

CARIDSEngineInformation—No error has occurred but some routine event completed in CAR IDS database engine. Severity level is Informational(6).

CARIDSEngineCritical—This alarm does not compromise data or prevent the use of the system but does required attention. Severity level is Critical(2).

CARIDSEngineFailure—Combined alarm for emergency and error situations. Something unexpected occurred that might compromise data or access to data or cause CAR IDS to fail. Severity level is Error(3).


Note For any alarms with severity levels at or higher than Critical, an alert gets automatically generated.


For more information, see Cisco Unified CDR Analysis and Reporting Guide.

New CAR Object and Counters

The new CAR counters monitor the CAR database space and shared memory usage. The following CAR counters for the Cisco CAR DB object get supported:

RootDBSpaceUsed—Percentage of Root DB space consumed. The root DB space gets used by the IDS system tables in the CAR IDS instance.

CARDBSpaceUsed—Percentage of CAR DB space consumed. The CAR DB space gets used by the CAR database.

CARTempDBSpaceUsed—Percentage of CAR temporary DB space consumed. The CAR temporary DB space gets used by temporary tables in the CAR IDS instance and used by CAR applications.

FreeSharedMemory—Total free and shared memory expressed in kilobytes (KB). Shared memory gets used by the database system and all database applications in the CAR IDS instance.

UsedSharedMemory—Total used and shared memory expressed in kilobytes (KB). Shared memory gets used by the database system and all database applications in the CAR IDS instance.

There are no performance counters that monitor the CAR IDS processes individually because the counters get automatically added for each new process. The counters get implemented with a new thread/job of the CAR IDS performance in the existing CAR Scheduler service by using Java API (JNI based statsUpdate()).

Hunt/CTI Integration for CAR Reporting

CAR supports hunt groups and contains the following new reports:

Hunt Pilot Summary

Hunt Pilot Detailed Report

Hunt Pilot Summary

Only CAR administrators generate the Hunt Pilot Summary Report.The CDR Hunt Pilot Call Summary report displays the call details for the specified hunt pilot. This report displays an only an overview of the calls for the hunt pilots and hunt member information is not included. The CAR administrator can generate report for a maximum of five hunt pilot DNs.

Hunt Pilot Detailed Report

Only CAR administrators generate the Hunt Pilot Detailed Call Report. This report displays call details for a hunt pilot number or a hunt member DN.

CAR and CDRM Alarm Interface

CAR and CDRM allow the alarm interface to raise alerts. The alarm interface can generate Syslog events, SNMP traps, and e-mail notifications by using RIS/Collector/Alert Manager. CAR allows the performance interface to poll serviceability counters and to be monitored in Cisco Unified Real Time Monitoring Tool.

System-Wide Call Tracking End-to-End Call Trace

The End-to-End Call Trace feature facilitates tracing calls that traverse multiple Cisco voice products, such as Unified CM, Cisco IOS Gateways, and other products.

There are four new CDR fields added: CAR Loader, schema, CDR export, CDR search reports and migration.

For more information about System-Wide Call Tracking (SCT), see End-to-End Call Trace.

Cisco Unified Call Detail Records

This feature traces calls that traverse multiple Cisco voice products by using the call records collected from each platform generated for the same call.

This section contains information on the following topics:

End-to-End Call Trace

Remote Destination to Number Mapping and CDRs

New CDR Fields to Support Call Control Discovery

New CDR Fields to Support External Call Control

New CDR Support for iSAC Codec

New CDR Fields for Hunt List Support

End-to-End Call Trace

To support the End-to-End call trace, following new fields have been added in the CDR search reports:

IncomingProtocolID

IncomingProtocolCallRef

OutgoingProtocolID

OutgoingProtocolCallRef

Remote Destination to Number Mapping and CDRs

For an outgoing call to mobile users, the called party information in the CDR gets recorded based on the "Log Mobile Number in CDR" service parameter. The default equals False. If the service parameter is False, the enterprise number of the mobile user gets recorded in the CDR as the called party number. If the service parameter equals True, the mobile number gets recorded in CDR as the called party number.

New CDR Fields to Support Call Control Discovery

New codes display for the call control discovery feature, as described in Table 2-6. (For more information on call control discovery, see Cisco Unified CDR Guide.)

Table 2-6 Codes for Call Control Discovery

Value
Type
Description

464

Redirect Reason Code

Indicates that the call is redirected to a PSTN failover number

131

Call Termination Code

Call Control Discovery PSTN Failover (Cisco specific)

29

OnBehalfof Code

CCDRequestingService


New CDR Fields to Support External Call Control

Table 2-7 describes the new CDR fields for the external call control feature. Use Table 2-7 in conjunction with the Table 2-8, which describes the routing reason values that are specific to external call control. (For more information on external call control, see Cisco Unified CDR Guide.)

Table 2-7 CDR Fields for External Call Control

Field Name
Range of Values
Description

currentRoutingReason

Positive Integer

This field, which is used with the external call control feature, displays the reason why the call was intercepted for the current call. For a list of reasons, see Table 2-8.

Default value is 0.

origRoutingReason

Positive Integer

This field, which is used with the external call control feature, displays the reason why the call was intercepted for the first time. For a list of reasons, see Table 2-8.

Default value is 0.

lastRedirectingRoutingReason

Positive Integer

This field, which is used with the external call control feature, displays why the call was intercepted for the last time. For a list of reasons, see Table 2-8.

Default - Empty string.


Table 2-8 includes the reasons that can display for the currentRoutingReason, origRoutingReason, or lastRedirectingRoutingReason fields.

Table 2-8 Routing Reason Values for External Call Control

Value that Displays in the Field
Reason
Description

0

PDPDecision_NONE

This value indicates that the route server did not return a routing directive to the Cisco Unified Communications Manager.

1

PDPDecision_Allow_Fulfilled

This value indicates that Cisco Unified Communications Manager allowed a call.

2

PDPDecision_Allow_Unfulfilled

This value indicates that Cisco Unified Communications Manager disallowed a call.

3

PDPDecision_Divert_Fulfilled

This value indicates that Cisco Unified Communications Manager diverted the call.

4

PDPDecision_Divert_Unfulfilled

This value indicates that Cisco Unified Communications Manager was not able to divert the call.

5

PDPDecision_Forward_Fulfilled

This value indicates that Cisco Unified Communications Manager forwarded the call.

6

PDPDecision_Forward_Unfulfilled

This value indicates that Cisco Unified Communications Manager was unable to forward the call.

7

PDPDecision_Reject_Fulfilled

This value indicates that Cisco Unified Communications Manager rejected the call.

8

PDPDecision_Reject_Unfulfilled

This value indicates that Cisco Unified Communications Manager was not able to reject the call.


CAR supports the new fields from the loader, CDR export, and CDR search reports on display and migration.

New CDR Support for iSAC Codec

The codec fields can now support the iSAC (Media_Payload_ISAC) with the value of 89.

New CDR Fields for Hunt List Support

Table 2-9 describes the new CDRs for the hunt list support (see Cisco Unified CDR Guide for more information).

Table 2-9 CDR Fields for Hunt Lists

Field Name
Range of Values
Description

huntPilotDN

Text String

This field indicates the hunt pilot DN through which the call is routed.

Default - Empty string.

huntPilotPartition

Text String

This field indicates the partition for the hunt pilot DN.

Default - Empty string.

huntPilotDN

Text String

This field indicates the hunt pilot DN through which the call is routed.

Default - Empty string.


Cisco Unified Reporting

There are no updates for Cisco Unified Reporting Guide in the Release 8.0(1).

MIB Updates

Table 2-10 lists the deprecated and replaced MIBs.

Table 2-10 Updated MIB

Action
Description

Deprecated

CcmDevFailCauseCode;

Added CcmDevRegFailCauseCode and

CcmDevUnregCauseCode

Deprecated

ccmPhoneStatusReason;

Added ccmPhoneUnregReason and

ccmPhoneRegFailReason in ccmPhoneTable

Deprecated

ccmPhoneFailCauseCode;

Added ccmPhoneFailedRegFailReason in ccmPhoneFailedTable

Deprecated

ccmPhoneStatusUpdateReason;

Added ccmPhoneStatusUnregReason and ccmPhoneStatusRegFailReason in ccmPhoneStatusUpdateTable

Deprecated

ccmGatewayStatusReason;

Added ccmGatewayUnregReason and

ccmGatewayRegFailReason in ccmGatewayTable.

Deprecated

ccmMediaDeviceStatusReason;

Added ccmMediaDeviceUnregReason and ccmMediaDeviceRegFailReason in ccmMediaDeviceTable.

Deprecated

ccmCTIDeviceStatusReason;

Added ccmCTIDeviceUnregReason and ccmCTIDeviceRegFailReason in ccmCTIDeviceTable

Deprecated

ccmH323DevStatusReason;

Added ccmH323DevUnregReason and ccmH323DevRegFailReason in ccmH323DeviceTable.

Deprecated

ccmVMailDevStatusReason;

Added ccmVMailDevUnregReason and

ccmVMailDevRegFailReason in ccmVoiceMailDeviceTable.

Deprecated

ccmGatewayFailCauseCode;

Added ccmGatewayRegFailCauseCode in ccmNotificationsInfo.

Deprecated the following Notification Type

ccmGatewayFailed and added ccmGatewayFailedReason.

Deprecated following OBJECT_GROUPS

ccmPhoneInfoGroupRev5,

ccmNotificationsInfoGroupRev4, ccmGatewayInfoGroupRev3,

ccmMediaDeviceInfoGroupRev3, ccmCTIDeviceInfoGroupRev3, ccmH323DeviceInfoGroupRev2, ccmVoiceMailDeviceInfoGroupRev1 and ccmNotificationsGroupRev2;

Added following OBJECT_GROUPS:

ccmPhoneInfoGroupRev6,

ccmNotificationsInfoGroupRev5,

ccmGatewayInfoGroupRev4,

ccmMediaDeviceInfoGroupRev4,

ccmCTIDeviceInfoGroupRev4,

ccmH323DeviceInfoGroupRev3,

ccmVoiceMailDeviceInfoGroupRev2,

ccmNotificationsGroupRev3.

Deprecated following MODULE-COMPLIANCE

ciscoCcmMIBComplianceRev6;

Added ciscoCcmMIBComplianceRev7.

Obsoleted following OBJECT_GROUPS

ccmInfoGroupRev3,

ccmH323DeviceInfoGroupRev1