Cisco Unified JTAPI Developers Guide for Cisco Unified Communications Manager Release 9.0(1)
New and Changed Information
Downloads: This chapterpdf (PDF - 121.0KB) The complete bookPDF (PDF - 13.1MB) | Feedback

New and Changed Information

Table Of Contents

New and Changed Information

Cisco Unified Communications Manager Release 9.0(1)

Features Supported in Previous Releases

Cisco Unified Communications Manager Release 8.6(1)

Cisco Unified Communications Manager Release 8.5(1)

Cisco Unified Communications Manager Release 8.0(1)

Cisco Unified Communications Manager Release 7.1(3)

Cisco Unified Communications Manager Release 7.1(2)

Cisco Unified Communications Manager Release 7.0(1)

Cisco Unified Communications Manager Release 6.1

Cisco Unified Communications Manager Release 6.0

Cisco Unified Communications Manager Release 5.1

Cisco Unified Communications Manager Release 5.0


New and Changed Information


This chapter describes new and changed JTAPI information for Cisco Unified Communications Manager, release 9.0(1) and features supported in the previous releases. It contains the following sections:

Cisco Unified Communications Manager Release 9.0(1)

Features Supported in Previous Releases

For more information, go to the Programming Guides website at http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_programming_reference_guides_list.html.

Cisco Unified Communications Manager Release 9.0(1)

This section describes the new and changed features in Cisco Unified Communications Manager Release 9.0(1):

Cius Persistency, page 3-27

CTI Remote Device for JTAPI, page 3-36

E911 Teleworker, page 3-52

Hunt list Connected Number, page 3-65

Native Queuing, page 3-86

URI Dialing, page 3-159

Features Supported in Previous Releases

This section describes the features supported in the releases prior to 8.6(1) and contains the following sections:

Cisco Unified Communications Manager Release 8.6(1)

Cisco Unified Communications Manager Release 8.5(1)

Cisco Unified Communications Manager Release 8.0(1)

Cisco Unified Communications Manager Release 7.1(3)

Cisco Unified Communications Manager Release 7.1(2)

Cisco Unified Communications Manager Release 7.0(1)

Cisco Unified Communications Manager Release 6.1

Cisco Unified Communications Manager Release 6.0

Cisco Unified Communications Manager Release 5.1

Cisco Unified Communications Manager Release 5.0

Cisco Unified Communications Manager Release 8.6(1)

This section describes the new and changed features in Cisco Unified Communications Manager Release 8.6(1):

Account lockout, page 3-1

EnergyWise Deep Sleep Mode, page 3-53

FIPS Compliance, page 3-57

Password expiry, page 3-95

New JTAPI x64 client for 64-bit operating systems.

Cisco Unified Communications Manager Release 8.5(1)

This section describes the new and changed features in Cisco Unified Communications Manager Release 8.5(1):

"Agent Greeting" section on page 3-1

"API for Exposing Built-In-Bridge Status" section on page 3-3

"Play Zip Tone" section on page 3-95

"Single Sign-On" section on page 3-123

"Support for VMware" section on page 3-138

"Support for VMware" section on page 3-138

Cisco Unified Communications Manager Release 8.0(1)

This section describes the new and changed features in Cisco Unified Communications Manager Release 8.0(1):

Call Control Discovery, page 3-8

Call Pickup, page 3-10

CallFwdAll Key Press Notification, page 3-13

End to End Call Tracing, page 3-53

Extension Mobility Cross Cluster, page 3-55

External Call Control, page 3-56

Hunt List, page 3-64

iSac Codec, page 3-69

Secured Monitoring and Recording, page 3-118

Support for Cisco Unified IP Phone 6901, page 3-135

Support for 100+ Directory Numbers, page 3-137

Support for VMware, page 3-138

Verification Involving PSTN Reachability, page 3-160

Cisco Unified Communications Manager Release 7.1(3)

This section describes the new and changed features in Cisco Unified Communications Manager Release 7.1(3):

Terminal and Address Capability Settings, page 3-141.

Cisco Unified Communications Manager Release 7.1(2)

This section describes the new and changed features in Cisco Unified Communications Manager Release 7.1(2):

Component Updater, page 3-30

Direct Transfer Across Lines, page 3-42

Drop Any Party, page 3-50

IPv6 Support, page 3-68

Join Across Lines or Connected Conference Across Lines, page 3-71

Logical Partitioning, page 3-80

Message Waiting Indicator Enhancement, page 3-83

Park Monitoring and Assisted DPark Support, page 3-90

Interface Changes, page 3-136

Swap or Cancel and Transfer or Conference Behavior, page 3-140

Cisco Unified Communications Manager Release 7.0(1)

This section describes the new and changed features in Cisco Unified Communications Manager from Release 6.1 to Release 7.0(1) and Cisco Unified JTAPI enhancements. It has the following sections:

Call Pickup, page 3-10

Calling Party Normalization, page 3-13

Click to Conference, page 3-28

Do Not Disturb-Reject, page 3-49

Extension Mobility Username Login, page 3-56

Java Socket Connect Timeout, page 3-69

Join Across Lines with Conference Enhancements (SCCP and SIP), page 3-76

Locale Infrastructure Development, page 3-79

selectRoute() with Calling Search Space and Feature Priority, page 3-120


Note Cisco Unified Communications Manager Release 7.0(1) does not support the following IPv6 related methods:

canSupportIPv6()
setProviderOpenRetryAttempts (int retryAttempts)
getProviderOpenRetryAttempts()
getIPAddressingMode() (available on CiscoMediaTerminal and CiscoRouteTerminal interfaces)
register(java.net.InetAddress address, int port, CiscoMediaCapability [] capabilities, int[] algorithmIDs, java.net.InetAddress address_v6, int activeAddressingMode)
register(CiscoMediaCapability [] capabilities, int[] int registration Type, int[] algorithmIDs, int activeAddressingMode)
getTerminals() (available on new interface CiscoProviderTermCapabilityChangedEv)
getAddressingModeForMedia()
getCallingPartyIpAddr_v6() (available on CiscoCallCtlConnOfferedEv and CiscoRouteEvent interfaces)
CTIERR_IPADDRMODEMISMATCH
CTIERR_DYNREG_IPADDRMODE_MISMATCH
hasIPv6CapabilityChanged()
CiscoTerminal.IP_ADDRESSING_MODE_IPv4
CiscoTerminal.IP_ADDRESSING_MODE_IPv6
CiscoTerminal.IP_ADDRESSING_MODE_IPv4_v6
CiscoTerminal.IP_ADDRESSING_MODE_Unknown
CiscoTermRegistrationFailedEv.IP_ADDRESSING_MODE_MISMATCH



Note For the features, Join Across Lines, Do Not Disturb-Reject, and Calling Party Normalization, each Cisco JTAPI must be upgraded to a version that supports these features. Additionally, if you are upgrading from Release 5.1 and you use Join Across Lines, the Conference Chaining feature must not be enabled or used until all applications are either upgraded to a version compatible with the new unified CM version. Also, you should verify that the applications are not impacted by the Conference Chaining feature.


Cisco Unified Communications Manager Release 6.1

This section describes the new and changed features in Cisco Unified Communications Manager from Release 6.0 to Release 6.1 and Cisco Unified JTAPI enhancements. It has the following sections:

Certificate Download API Enhancement, page 3-14

Intercom Support for Extension Mobility, page 3-67

Join Across Lines, page 3-70

Cisco Unified Communications Manager Release 6.0

This section describes the new and changed features in Cisco Unified Communications Manager, Release 6.0 and Cisco Unified JTAPI enhancements. It has the following sections:

Arabic and Hebrew Language Support, page 3-3

Calling Party IP Address, page 3-11

CiscoRTPHandle Interface on Cisco RTP Events, page 3-24

Cisco Unified IP 7931G Phone Interaction, page 3-20

Conference Chaining, page 3-34

Directed Call Park, page 3-46

Do Not Disturb, page 3-47

Forwarding on No Bandwidth and Unregistered DN, page 3-61

Hold Reversion, page 3-64

Intercom, page 3-66

Multilevel Precedence and Preemption Support, page 3-86

Noncontroller Adding of Parties to Conferences, page 3-89

Recording and Silent Monitoring, page 3-101

Secure Conferencing, page 3-110

Translation Pattern Support, page 3-149

Version Format Change, page 3-159

Voice MailBox Support, page 3-160

Cisco Unified Communications Manager Release 5.1

This section describes the new and changed features in Cisco Unified Communications Manager, from Release 5.0 to Release 5.1 and Cisco Unified JTAPI enhancements. It has the following sections:

Call Forward Override, page 3-9

Join Across Lines (Only SCCP), page 3-70

New Error Code in CiscoTermRegistrationFailedEv, page 3-89

Star (*) 50 Update, page 3-132

Cisco Unified Communications Manager Release 5.0

This section describes the new and changed features in Cisco Unified Communications Manager, from Release 4.x to Release 5.0 and Cisco Unified JTAPI enhancements. It has the following:

Auto Updater for Linux, page 3-4

Call Select Status, page 3-10

Command Line Invocation, page 3-30

Hairpin Support, page 3-62

Half-Duplex Media Support, page 3-62

JRE 1.2 and JRE 1.3 Support Removal, page 3-77

JTAPI Client Installer, page 3-77

JTAPI Version Information, page 3-78

Linux and Windows Installation, page 3-78

Network Alerting, page 3-88

Partition Support, page 3-92

QoS Support, page 3-98

Secure Real-Time Protocol Key Material, page 3-111

Silent Install, page 3-123

SIP 3XX Redirection, page 3-125

SIP REFER or REPLACE, page 3-128

SIP Phone Support, page 3-126

Superprovider and Change Notification, page 3-133

Terminal and Address Restrictions, page 3-142

Transport Layer Security (TLS), page 3-150

Unicode Support, page 3-156