Cisco Unified JTAPI Developers Guide for Cisco Unified Communications Manager Release 8.0(1)
New and Changed Information
Downloads: The complete bookPDF (PDF - 10.72MB) | Feedback

New and Changed Information

Table Of Contents

New and Changed Information

Cisco Unified Communications Manager Release 8.0(1)

Features Supported in Previous Releases

Cisco Unified Communications Manager Release 7.1(3)

Cisco Unified Communications Manager Release 7.1(2)

Cisco Unified Communications Manager Release 7.0(1)

Cisco Unified Communications Manager Release 6.1

Cisco Unified Communications Manager Release 6.0

Cisco Unified Communications Manager Release 5.1

Cisco Unified Communications Manager Release 5.0


New and Changed Information


This chapter describes new and changed JTAPI information for Cisco Unified Communications Manager, release 8.0(1) and features supported in the previous releases. It contains the following sections:

Cisco Unified Communications Manager Release 8.0(1)

Features Supported in Previous Releases

For more information, go to the Programming Guides website at http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_programming_reference_guides_list.html.

Cisco Unified Communications Manager Release 8.0(1)

This section describes the new and changed features in Cisco Unified Communications Manager Release 8.0(1):

Call Control Discovery—Facilitates provisioning for inter-call agent communications. For more information, see Call Control Discovery, page 3-6.

Call Pickup—Enables devices to receive alerts within Call Pickup Groups and events and enable them to act on these alerts by invoking APIs that support variations of Call Pickup. For more information, see Call Pickup, page 3-8.

CallFwdAll Key Press Notification—Enables applications to know whether the call is a normal call or a temporary call, when CallFwdAll key is enabled. For more information, see CallFwdAll Key Press Notification, page 3-11.

End to End Call Tracing—Enables the application to track any call uniquely. JTAPI associates a uniqueID with every Connection object. For more information, see End to End Call Tracing, page 3-43.

Extension Mobility Cross Cluster—Allows users to log in to an IP phone registered to a cluster with a user profiles configured with another cluster. For more information, see Extension Mobility Cross Cluster, page 3-44.

External Call Control—Enables Cisco Unified Call Manager to route calls based on enterprise policies and presence-based routing rules of individual users. For more information, see External Call Control, page 3-45.

Hunt List—Enables the JTAPI application to observe addresses and terminals that are HuntList LineGroup members. For more information, see Hunt List, page 3-51.

iSac Codec—Enables the application to register CiscoMediaTerminal or CiscoRouteTerminal with iSac codec capability. For more information see, iSac Codec, page 3-56.

Secured Monitoring and Recording—Enhances the ability to monitor or record calls in a secure environment. For more information, see Secured Monitoring and Recording, page 3-103.

Support for Cisco Unified IP Phone 6901 and 6911—Provides support for the new Cisco Unified IP Phone 6901. For more information, see Support for Cisco Unified IP Phone 6901, page 3-117.

Support for Hundred Plus Directory Numbers—Enables users to have more than 100 Directory Numbers associated with a Device (Phones, CTI Ports and Route Points). For more information, see Support for Hundred Plus Directory Numbers, page 3-119.

Support for VMWare—Cisco JTAPI can be used on VMware ESXi version 4.0. For more information, see Support for VMware, page 3-119.

Verification Involving PSTN Reachability—Routes calls over Internet that are currently routed over PSTN. For more information, see Verification Involving PSTN Reachability, page 3-139.

Features Supported in Previous Releases

This section describes the features supported in the releases prior to 8.0(1) and contains the following

sections:

Cisco Unified Communications Manager Release 7.1(3)

Cisco Unified Communications Manager Release 7.1(2)

Cisco Unified Communications Manager Release 7.0(1)

Cisco Unified Communications Manager Release 6.1

Cisco Unified Communications Manager Release 6.0

Cisco Unified Communications Manager Release 5.1

Cisco Unified Communications Manager Release 5.0

Cisco Unified Communications Manager Release 7.1(3)

This section describes the new and changed features in Cisco Unified Communications Manager Release 7.1(3):

Terminal and Address Capability Settings, page 3-122.

Cisco Unified Communications Manager Release 7.1(2)

This section describes the new and changed features in Cisco Unified Communications Manager Release 7.1(2):

Component Updater, page 3-25

Direct Transfer Across Lines, page 3-33

Drop Any Party, page 3-41

IPv6 Support, page 3-55

Join Across Lines or Connected Conference Across Lines, page 3-58

Logical Partitioning, page 3-67

Message Waiting Indicator Enhancement, page 3-70

Park Monitoring and Assisted DPark Support, page 3-75

Interface Changes, page 3-118

Swap or Cancel and Transfer or Conference Behavior, page 3-120

Cisco Unified Communications Manager Release 7.0(1)

This section describes the new and changed features in Cisco Unified Communications Manager from Release 6.1 to Release 7.0(1) and Cisco Unified JTAPI enhancements. It has the following sections:

Call Pickup, page 3-8

Calling Party Normalization, page 3-11

Click to Conference, page 3-23

Do Not Disturb-Reject, page 3-40

Extension Mobility Username Login, page 3-45

Java Socket Connect Timeout, page 3-56

Join Across Lines with Conference Enhancements, page 3-62

Locale Infrastructure Development, page 3-66

selectRoute() with Calling Search Space and Feature Priority, page 3-105


Note Cisco Unified Communications Manager Release 7.0(1) does not support the following IPv6 related methods:

canSupportIPv6()
setProviderOpenRetryAttempts (int retryAttempts)
getProviderOpenRetryAttempts()
getIPAddressingMode() (available on CiscoMediaTerminal and CiscoRouteTerminal interfaces)
register(java.net.InetAddress address, int port, CiscoMediaCapability [] capabilities, int[] algorithmIDs, java.net.InetAddress address_v6, int activeAddressingMode)
register(CiscoMediaCapability [] capabilities, int[] int registration Type, int[] algorithmIDs, int activeAddressingMode)
getTerminals() (available on new interface CiscoProviderTermCapabilityChangedEv)
getAddressingModeForMedia()
getCallingPartyIpAddr_v6() (available on CiscoCallCtlConnOfferedEv and CiscoRouteEvent interfaces)
CTIERR_IPADDRMODEMISMATCH
CTIERR_DYNREG_IPADDRMODE_MISMATCH
hasIPv6CapabilityChanged()
CiscoTerminal.IP_ADDRESSING_MODE_IPv4
CiscoTerminal.IP_ADDRESSING_MODE_IPv6
CiscoTerminal.IP_ADDRESSING_MODE_IPv4_v6
CiscoTerminal.IP_ADDRESSING_MODE_Unknown
CiscoTermRegistrationFailedEv.IP_ADDRESSING_MODE_MISMATCH



Note For the features, Join Across Lines, Do Not Disturb-Reject, and Calling Party Normalization, each JTAPI application must be upgraded to a version that is compatible with these features. Additionally, if you are upgrading from Release 5.1 and you use Join Across Lines, the Conference Chaining feature must not be enabled or used until all applications are either upgraded to a version compatible with the new CUCM version. Also, you should verify that the applications are not impacted by the Conference Chaining feature.


Cisco Unified Communications Manager Release 6.1

This section describes the new and changed features in Cisco Unified Communications Manager from Release 6.0 to Release 6.1 and Cisco Unified JTAPI enhancements. It has the following sections:

Certificate Download API Enhancement, page 3-12

Intercom Support for Extension Mobility, page 3-54

Join Across Lines, page 3-57

Cisco Unified Communications Manager Release 6.0

This section describes the new and changed features in Cisco Unified Communications Manager, Release 6.0 and Cisco Unified JTAPI enhancements. It has the following sections:

Arabic and Hebrew Language Support, page 3-1

Calling Party IP Address, page 3-9

CiscoRTPHandle Interface on Cisco RTP Events, page 3-20

Cisco Unified IP 7931G Phone Interaction, page 3-18

Conference Chaining, page 3-29

Directed Call Park, page 3-37

Do Not Disturb, page 3-38

Forwarding on No Bandwidth and Unregistered DN, page 3-48

Hold Reversion, page 3-51

Intercom, page 3-52

Multilevel Precedence and Preemption Support, page 3-73

Noncontroller Adding of Parties to Conferences, page 3-74

Recording and Silent Monitoring, page 3-86

Secure Conferencing, page 3-95

Translation Pattern Support, page 3-130

Version Format Change, page 3-139

Voice MailBox Support, page 3-140

Cisco Unified Communications Manager Release 5.1

This section describes the new and changed features in Cisco Unified Communications Manager, from Release 5.0 to Release 5.1 and Cisco Unified JTAPI enhancements. It has the following sections:

Call Forward Override, page 3-7

Join Across Lines, page 3-57

New Error Code in CiscoTermRegistrationFailedEv, page 3-74

Star (*) 50 Update, page 3-114

Cisco Unified Communications Manager Release 5.0

This section describes the new and changed features in Cisco Unified Communications Manager, from Release 4.x to Release 5.0 and Cisco Unified JTAPI enhancements. It has the following:

Auto Updater for Linux, page 3-2

Call Select Status, page 3-8

Command Line Invocation, page 3-25

Hairpin Support, page 3-49

Half-Duplex Media Support, page 3-50

JRE 1.2 and JRE 1.3 Support Removal, page 3-64

JTAPI Client Installer, page 3-64

JTAPI Version Information, page 3-65

Linux, Windows, and Solaris Installation, page 3-65

Network Alerting, page 3-73

Partition Support, page 3-77

QoS Support, page 3-83

Secure Real-Time Protocol Key Material, page 3-96

Silent Install, page 3-108

SIP 3XX Redirection, page 3-109

SIP REFER or REPLACE, page 3-113

SIP Phone Support, page 3-110

Superprovider and Change Notification, page 3-115

Terminal and Address Restrictions, page 3-123

Transport Layer Security (TLS), page 3-131

Unicode Support, page 3-137