Installing Cisco Unified Communications Manager, Release 10.0(1)
Reference Information
Downloads: This chapterpdf (PDF - 1.14MB) The complete bookPDF (PDF - 2.73MB) | The complete bookePub (ePub - 311.0KB) | Feedback

Reference Information

Reference Information

Access Cisco Unified CM IM and Presence Administration

Complete the following procedure to access the Cisco Unified CM IM and Presence Administration interface.

Procedure
    Step 1   Open a browser and enter https://<server name or IP address>, where the server name or IP address equals the server where the IM and Presence Service is installed.
    Step 2   From Administrative Applications, select Cisco Unified Communications Manager IM and Presence.
    Step 3   If the system prompts you about certificates, you must enable HTTPS to secure communications between the browser client and the web server. See the Release Notes for Cisco Unified Communications Manager for more information about how to load the required certificates for the HTTPS connection.
    Step 4   Enter the application username and application user password that you specified during installation when the system prompts you for a user name and password. The Cisco Unified CM IM and Presence Administration interface displays.
    Step 5   To access other IM and Presence interfaces, select an interface from the Navigation drop-down list and select Go.

    Access Cisco Unified CM Administration

    Procedure
      Step 1   Open a browser and enter https://<server name or IP address>, where the server name or IP address equals the server where Cisco Unified Communications Manager is installed.
      Step 2   From the list of Installed Applications, select Cisco Unified Communications Manager.
      Step 3   If the system prompts you about certificates, you must enable HTTPS to secure communications between the browser client and the web server.
      Step 4   Enter the application username and application user password that you specified during installation and log in to the interface.
      Step 5   To access other Cisco Unified Communications Manager interfaces, select an interface from the Navigation drop-down list and click Go.