IP Address, Domain and Hostname for IM and Presence Service on Cisco Unified Communications Manager, Release 9.0(1)
Validating IM and Presence and MOC Interoperability after an IP Address Change
Downloads: This chapterpdf (PDF - 65.0KB) The complete bookPDF (PDF - 586.0KB) | Feedback

Validating IM and Presence and MOC Interoperability after an IP Address Change

Table Of Contents

Validating IM and Presence and MOC Interoperability after an IP Address Change


Validating IM and Presence and MOC Interoperability after an IP Address Change


November 30, 2012

Perform the steps in this procedure only if you change the hostname or IP address on a IM and Presence server that was previously integrated with Microsoft LCS/OCS. You need to do this to ensure the Microsoft Office Communicator (MOC) server and clients reflect the correct IM and Presence IP address and hostname (after your changes) and the new FQDN.

Before You Begin

Complete the Post-Change Task List.

Procedure


Step 1 Sign out of any existing MOC client session that you may have running.

Step 2 Sign in to the OCS or LCS server.

Step 3 Edit the Front End properties, in the following tabs on the OCS or LCS server:

Tab
Action

Routing Tab

a. Update the renamed IM and Presence server with its new FQDN and IP address.

b. Change the `Next Hop' IP address of the wild carded IM and Presence domain to be the new IM and Presence IP address.

Host Authorization Tab

Ensure that the new IM and Presence IP address and new FQDN is listed as follows:

Outbound only - N

Throttle As Server -Y

Treat As Authenticated - Y


Step 4 Right-click on the LCS/OCS Users, and edit as follows:

a. Change the `Server URI' to be the new IM and Presence FQDN.

b. Select OK.

Step 5 Stop the OCS/LCS Front End Service.

Step 6 Restart the OCS/LCS Front End Service.

Step 7 Sign in to the MOC client, and confirm control of a Cisco device.