Cisco Unified Communications Operating System Administration Guide, Release 9.0(1)
Component status in Cisco Unified Operating System
Downloads: This chapterpdf (PDF - 1.1MB) The complete bookPDF (PDF - 3.21MB) | Feedback

Component status in Cisco Unified Operating System

Component status in Cisco Unified Operating System

View cluster nodes status

Procedure
    Step 1   Sign in to Cisco Unified IM and Presence Operating System Administration.
    Step 2   Select Show > Cluster.
    Step 3   Review the fields in the Cluster window.
    Table 1 Cluster Nodes Field Descriptions

    Field

    Description

    Hostname

    The complete hostname of the server.

    IP Address

    The IP address of the server.

    Alias

    The alias name of the server, when defined.

    Type of Node

    Indicates whether the server is a publisher node or a subscriber node.


    View hardware status

    Procedure
      Step 1   Sign in to Cisco Unified IM and Presence Operating System Administration.
      Step 2   Select Show > Hardware.
      Step 3   Review the fields in the Hardware Status window, as described in the table below.
      Table 2 Hardware Status Field Descriptions

      Field

      Description

      Platform Type

      The model identity of the platform server.

      Serial Number

      The serial number of the platform server.

      Processor Speed

      Processor speed (measured in MHz) in the platform server.

      CPU Type

      The type of processor in the platform server.

      Memory

      The total amount of memory in MBytes.

      Object ID

      Used by SNMP to identify an object.

      OS Version

      The version of the platform operating system.

      RAID Details

      Status of the RAID controller and logical drive if the machine is RAID enabled.


      View network status

      Before You Begin

      The network status information that displays depends on whether Network Fault Tolerance is enabled. When Network Fault Tolerance is enabled, Ethernet port 1 automatically takes over network communications if Ethernet port 0 fails. If Network Fault Tolerance is enabled, network status information displays for the network ports Ethernet 0, Ethernet 1, and Bond 0. If Network Fault Tolerance is not enabled, status information displays only for Ethernet 0.

      Procedure
        Step 1   Sign in to Cisco Unified IM and Presence Operating System Administration.
        Step 2   Select Show > Network.
        Step 3   Review the fields in the Network Configuration window, as described in the table below.
        Table 3 Network Settings Field Descriptions

        Field

        Description

        DHCP

        Indicates whether DHCP is enabled for Ethernet port 0.

        Status

        Indicates whether the port is Up or Down for Ethernet ports 0 and 1.

        IP Address

        The IP address of Ethernet port 0 (and Ethernet port 1 if Network Fault Tolerance (NFT) is enabled).

        IP Mask

        The IP mask of Ethernet port 0 (and Ethernet port 1 if NFT is enabled).

        Link Detected

        Indicates whether an active link exists.

        Queue Length

        The length of the queue.

        MTU

        The maximum transmission unit.

        Mac Address

        The hardware address of the port.

        Receive Statistics

        Information about received bytes and packets.

        Transmit Statistics

        Information about transmitted bytes and packets.

        Primary DNS

        The IP address of the primary domain name server.

        Secondary DNS

        The IP address of the secondary domain name server.

        Domain

        The domain of the server.

        Gateway

        The IP address of the network gateway on Ethernet port 0.


        View installed software

        You can view the software versions and installed software options.

        Procedure
          Step 1   Sign in to Cisco Unified IM and Presence Operating System Administration.
          Step 2   Select Show > Software.
          Step 3   Review the fields in the Software Packages window described in the table below.
          Table 4 Software Packages Field Descriptions

          Field

          Description

          Partition Versions

          The software version that is running on the active and inactive partitions.

          Active Version Installed Software Options

          The versions of installed software options, including locales and dial plans, that are installed on the active version.

          Inactive Version Installed Software Options

          The versions of installed software options, including locales and dial plans, that are installed on the inactive version.


          View system status

          Procedure
            Step 1   Sign in to Cisco Unified IM and Presence Operating System Administration.
            Step 2   Select Show > System.
            Step 3   Review the fields in the System Status window, as described in the table below.
            Table 5 Platform Status Field Descriptions

            Field

            Description

            Host Name

            The name of the Cisco MCS host where Cisco Unified Operating System is installed.

            Date/Time

            The date and time based on the continent and region that were specified during operating system installation.

            Time Zone

            The time zone that was chosen during installation.

            Locale

            The language that was chosen during operating system installation.

            Product Version

            The operating system version.

            Platform Version

            The platform version.


            View IP preferences

            Procedure
              Step 1   Sign in to Cisco Unified IM and Presence Operating System Administration.
              Step 2   Select Show > IP Preferences.
              Step 3   To filter or search records, perform one of the following actions:
              1. From the first list box, select a search parameter.
              2. From the second list box, select a search pattern.
              3. Specify the appropriate search text, if applicable.
              Step 4   Select Find.
              Step 5   Review the fields in the System Status window.
              Table 6 IP Preference Field Descriptions

              Field

              Description

              Application

              The name of the application.

              Protocol

              The type of protocol that this application will use, for example, TCP or UDP.

              Port Number

              The port number that is configured for this application.

              Type

              The type of transport that this application will use:

              • Public
              • Private
              • Translated

              Translated Port

              The translated port number that is configured for this application.

              Status

              Indicates whether the application is enabled or disabled.

              Description

              The description of the application.