Command Line Interface Guide for Cisco Unified Communications Solutions, Release 9.1(1)
Unset Commands
Downloads: This chapterpdf (PDF - 1.22MB) The complete bookPDF (PDF - 3.9MB) | Feedback

Unset Commands

Unset Commands

unset ipsec*

unset ipsec policy_group

This command disables the ipsec policy on the specified group.

unset ipsec policy_group policy_group

Syntax Description

Parameters Description
policy_group

Specifies the group name.

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: No

Applies to: Unified Communications Manager, IM and Presence service on Unified Communications Manager, Cisco Unity Connection

unset ipsec policy_name

This command disables the ipsec policy with the specified name.

unset ipsec policy_name policy_name

Syntax Description

Parameters Description
policy_name

Specifies the policy name to disable.

Command Modes

Administrator (admin:)

Usage Guidelines

Enter ALL for policy_name to disable all policy names.

Requirements

Command privilege level: 1

Allowed during upgrade: No

Applies to: Unified Communications Manager, IM and Presence service on Unified Communications Manager, Cisco Unity Connection

unset network*

unset network dns options

This command unsets DNS options.

unset network dns options [ timeout ] [ attempts ] [ rotate ]

Syntax Description

Parameters Description
timeout

Sets the wait time before the system considers a DNS query as failed to the default.

attempts

Sets the number of DNS attempts to make before the system fails to the default.

rotate

Sets the method for selecting a nameserver to the default. This affects how loads are distributed across nameservers.

Command Modes

Administrator (admin:)

Usage Guidelines

You are asked to confirm that you want to execute this command.


Caution


If you continue, the system loses network connectivity temporarily.

Requirements

Applies to: Unified Communications Manager, IM and Presence service on Unified Communications Manager, Cisco Unity Connection

unset network domain

This command unsets the domain name and restarts the server.

unset network domain

Command Modes

Administrator (admin:)

Usage Guidelines

You are asked to confirm that you want to execute this command.

Requirements

Applies to: Unified Communications Manager, IM and Presence service on Unified Communications Manager, Cisco Unity Connection

Example

admin: unset network domain
cmdSetIp.domain.name.change.warning
Continue (y/n)?
trying to restart system...
Warning: Restart could take up to 5 minutes...
Shutting down Service Manager. Please wait...

unset network ipv6 static_address

This command unsets the IPV6 static address.

unset network ipv6 static_address [ reboot ]

Syntax Description

Parameters Description
reboot

Reboots the server after applying the change.

Command Modes

Administrator (admin:)

Requirements

Command privilege level: 1

Allowed during upgrade: No

Applies to: Unified Communications Manager, Cisco Unity Connection

Example

admin: admin:unset network ipv6 static_address
    W A R N I N G
The Server must be rebooted for these changes to take effect.
Please make sure that you reboot this server.
IPv6 static address was removed.