Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
Extension Mobility Cross Cluster template
Downloads: This chapterpdf (PDF - 295.0KB) The complete bookPDF (PDF - 6.68MB) | Feedback

Extension Mobility Cross Cluster template

Extension Mobility Cross Cluster template

This chapter provides information to use Cisco Unified Communications Manager Bulk Administration (BAT) to insert, update, or delete Extension Mobility Cross Cluster (EMCC) in batches, rather than performing individual updates through Cisco Unified Communications Manager Administration.

EMCC templates

Use BAT EMCC templates to define the common EMCC attributes to add a group of new EMCC. Prior to creating the template, make sure EMCC settings have already been configured in Cisco Unified Communications Manager Administration. You cannot create new settings in BAT.

Find EMCC template

Because you might have several EMCC templates, Cisco Unified Communications Manager lets you locate specific templates on the basis of specific criteria. Use the following procedure to locate templates.


Note


During your work in a browser session, your find/list search preferences are stored in the cookies on the client machine. If you navigate to other menu items and return to this menu item, or if you close the browser and then reopen a new browser window, your Cisco Unified Communications Manager search preferences are retained until you modify your search.


Procedure
    Step 1   Choose Bulk Administration > EMCC > EMCC Template. The EMCC Template Find and List window displays. Use the two drop-down list boxes to search for a template.
    Step 2   From the first Find EMCC Template where drop-down list box, choose one of the following criteria:
    • Template Name
    • Description

    From the second Find EMCC Template where drop-down list box, choose one of the following criteria:

    • begins with
    • contains
    • is exactly
    • ends with
    • is empty
    • is not empty
    Step 3   Specify the appropriate search text, if applicable, and click Find.
    Tip   

    To find all EMCC Templates that are registered in the database, click Find without entering any search text.

    A list of discovered templates displays.

    Step 4   From the list of records, click the device name that matches your search criteria. The window displays the EMCC template that you choose.

    Related Information

    Create new EMCC template

    Use BAT to create an EMCC template.

    Procedure
      Step 1   Choose Bulk Administration > EMCC > EMCC Template. The EMCC Template Find and List window displays.
      Step 2   Click Add New. The EMCC Template Configuration window displays.
      Step 3   Enter the EMCC settings that this batch has in common. See Table 1 for field descriptions.
      Step 4   After you have entered all the settings for this EMCC template, click Save. This creates the template.

      What to Do Next

      After creating the template, set a default template from the Insert page. You can access the Insert page through Bulk Administration > EMCC > Insert/Update EMCC.

      Related Information

      Delete EMCC template

      You can delete EMCC BAT templates when you no longer require them.


      Note


      The template that is set as the default EMCC template cannot be deleted from the system. You can find the default EMCC template from the Insert/Update EMCC page, or from the Delete EMCC page. You can also find it from the EMCC Template Find List page. On the Find List page, no check box displays against the default template.


      Procedure
        Step 1   Find the EMCC Template that you want to delete.
        Step 2   In the EMCC Template Configuration window, verify that this is the template that you want to delete and click Delete.
        Note   

        You can also delete the EMCC template from the EMCC Template Find and List window. Check the check box next to the template that you want to delete and click Delete Selected.

        A message displays that asks you to confirm the delete operation.
        Step 3   To delete the template, click OK. The template name disappears from the list of EMCC templates list on the Find and List EMCC Templates window.
        Caution   

        If you submit a job that uses a particulate EMCC template and if you delete the template, the job also gets deleted.


        Related Tasks
        Related Information

        BAT EMCC template field descriptions

        The following table provides descriptions of all possible fields that display when you are adding an EMCC template.

        Some fields display the values that were configured in Cisco Unified Communications Manager Administration.

        In the BAT user interface, field names that have an asterisk require an entry. Treat fields that do not have an asterisk as optional.

        Table 1 Field descriptions for an EMCC template

        Field

        Description

        Device Information

        Template Name

        Enter the name for the template.

        Description

        Enter a description for the EMCC template that you want to create. The description can include up to 50 characters in any language, but it cannot include double-quotes ("), percentage sign (%), ampersand (&), back-slash (\), or angle brackets (<>).

        Device Pool

        Choose the device pool for this EMCC.

        For devices, a device pool defines sets of common characteristics, such as region, date/time group, Cisco Unified Communications Manager group, and calling search space for auto-registration.

        SIP Profile

        Choose the default SIP profile or a specific profile that was previously created. SIP profiles provide specific SIP information for the phone such as default telephony event payload type, registration and keepalive timers, media ports, Iris, and dynamic DNS server addresses.

        Common Device Configuration

        Choose the common device configuration to which you want this EMCC assigned. The common device configuration includes the attributes (services or features) that are associated with a particular user. You configure the Common device configurations in the Common Device Configuration window. See Common Device Setup in the Cisco Unified Communications Manager Administration Guide for more information.

        To see the common device configuration settings, click the View Details link.

        Common Phone Profile

        From the drop-down list box, choose a common phone profile from the list of available common phone profiles.