Cisco Unified Communications Manager Bulk Administration Guide, Release 9.0(1)
Tool for Auto-Registered phone support (TAPs) user locales
Downloads: This chapterpdf (PDF - 411.0KB) The complete bookPDF (PDF - 6.72MB) | Feedback

Tool for Auto-Registered phone support (TAPs) user locales

Tool for Auto-Registered phone support (TAPs) user locales

The chapter provides information to add or remove languages for TAPS prompts.

You have to select at least one user locale for TAPS to work. Use the Locale Installer to install user locale support. For more information on the Cisco Unified Communications Manager Locale Installer, refer to the specific locale installer documentation.

User locales for Tool for Auto-Registered phone support

Administrators can specify the languages for TAPs voice prompts by using the User Locales for TAPS option. You can configure user prompts for TAPS in several languages.

You must run the Locale Installer to install user locale support.


Note


Be aware that after you run the Cisco Unified Communications Manager Locale Installer on every Cisco Unified Communications Manager server, you must install the locale specific AAR file on Cisco Unified Contact Center Express (Cisco UCCX) server in the cluster.


Using the locale installer ensures that you have the latest translated text, translated voice prompts, country-specific phone tones, and country-specific gateways tones that are available for the phones. For more information on the Cisco Unified Communications Manager Locale Installer, refer to the specific locale installer documentation.


Note


You have to select at least one user locale for TAPS to work.


Add languages to Tool for Auto-Registered phone support prompts

You can add languages for TAPS prompts.

Procedure
    Step 1   In the Cisco Unified Communications Manager Administration window, choose Bulk Administration > TAPS > User Locales for TAPS. The User Locales Configuration window displays.
    Step 2   In the User Locales list box, choose the languages that you want to use for user prompts. Click the arrow to move the chosen language to the Selected User Locales list box.

    The User Locales list box is the list of languages that are installed on Cisco Unified Communications Manager. You can choose as many languages as you need for user prompts and move them to the Selected User Locales list box.

    Note   

    All the languages that you add to the Locales pane are offered as options to the user. The order of the locales in the Locales pane does not matter because users set the support prompt language preference on their phone.

    Step 3   After you have chosen the languages for user prompts, click Save to create a job.
    Note   

    For detailed steps to install Locales, refer to the Software Upgrades section of the Cisco Unified Communications Operating System Administration Guide.

    Step 4   Use the Job Scheduler option in the Bulk Administration main menu to schedule and/or activate this job.

    Related References

    Remove languages from Tool for Auto-Registered phone support prompts

    You can remove languages for TAPS prompts.

    Procedure
      Step 1   Choose Bulk Administration > TAPS > User Locales for TAPS. The Select User Locales window displays.
      Step 2   In the Selected User Locales list box, choose the language that you want to remove. Click the arrow to move the chosen language to the User Locales list box.

      The Selected User Locales list box is the list of languages that is chosen for user prompts. You can choose one or many languages from user prompts and move them to the User Locales list box.

      Step 3  
      Step 4   Click Save. A status message indicates that the update is complete.

      What to Do Next

      To return to the TAPS Options window, click Back.

      Select language of TAPs prompts on new phone

      End users can select the language of TAPs prompts for their phones.

      Procedure
        Step 1   Plug the phone into a port.

        The phone automatically registers and displays a number.

        Note   

        It takes around 20-25 seconds for downloading phone profile and making necessary updates in first node and directory.

        Step 2   Dial the CTI Route Point number provided by your system administrator and follow the prompts.
        Step 3   Dial the TAPS extension that your system administrator provided.
        Step 4   A voice prompts you to choose the language that you want to use. Choose appropriately.
        Step 5   Dial your personal extension number, that your system administrator provided, followed by #.
        Note   

        You may be instructed to enter the complete telephone number (including area code).

        Step 6   To confirm, enter your personal extension number again, followed by #.
        Step 7   You will receive confirmation prompt.
        Step 8   Hang up the phone.

        The phone resets and displays your extension number.


        What to Do Next

        If you experience any problems, contact your system administrator.