Cisco Unified Communications Manager Bulk Administration Guide, Release 9.0(1)
Insert, update, and delete EMCC devices
Downloads: This chapterpdf (PDF - 371.0KB) The complete bookPDF (PDF - 6.72MB) | Feedback

Insert, update, and delete EMCC devices

Insert, update, and delete EMCC devices

This chapter provides information to use Cisco Unified Communications Manager Bulk Administration (BAT) to insert, update, and delete EMCC devices in the Cisco Unified Communications Manager database.

Insert EMCC devices

Use BAT to add EMCC devices to the Cisco Unified Communications Manager database.

Each EMCC device bears a unique name in the format: EMCC1, EMCC2, and so on. BAT assigns EMCC device numbers by obtaining the last one used. If any other entity like, Phone, UDP, RDP, or EMCC Templates are named in the same format (EMCC1, EMCC2), then BAT Insert EMCC generates an error for duplicate naming. Therefore, ensure that the above entities with the same name format, are renamed before inserting EMCC Devices.

Example

The Admin user wants to insert 27 numbers of EMCC devices. First, BAT searches for the last EMCC device serial number used in the UCM say, EMCC123. Then it starts inserting devices from the next number onwards: EMCC124 to EMCC150. If UDP devices have already used the following names: EMCC135, EMCC137, and EMCC150, then BAT Insert EMCC will generate a naming error. EMCC devices with the above names do not get created unless the UDP devices are renamed.

Before You Begin

Before you insert EMCC devices, you must have a valid EMCC template set as default. Set the default template following the update EMCC devices procedure.

Procedure
    Step 1   Choose Bulk Administration > EMCC > Insert/Update EMCC. The Insert/Update EMCC Configuration window displays.
    Step 2   Make sure that the Insert EMCC Devices radio button is selected.
    Step 3   Enter the number of devices in the Number of EMCC Devices to be added field.
    Step 4   In the Job Information area, enter the Job description.

    Insert EMCC Devices is the default description.

    Step 5   To insert the EMCC devices immediately, click the Run Immediately radio button. Click Run Later to insert the devices at a later time.
    Step 6   To create a job for inserting the EMCC devices, click Submit.
    Step 7   Use the Job Scheduler option in the Bulk Administration main menu to schedule and/or activate this job.

    Related Tasks
    Related References
    Related Information

    Update EMCC devices

    Use BAT to update EMCC devices in the Cisco Unified Communications Manager database.

    Procedure
      Step 1   Choose Bulk Administration > EMCC > Insert/Update EMCC. The Insert/Update EMCC Configuration window displays.
      Step 2   Select the Update EMCC Devices radio button.
      Step 3   To set the default template, choose an EMCC template from the Default EMCC Template drop-down list box.
      Step 4   Select the Reset radio button to reset all devices, select Don't Reset if you do not wish to reset all devices.
      Step 5   In the Job Information area, enter the Job description.

      Update EMCC Devices is the default description.

      Step 6   To update the EMCC records immediately, click the Run Immediately radio button. Click Run Later to update the records at a later time.
      Step 7   To create a job for updating the EMCC devices, click Submit.
      Step 8   Use the Job Scheduler option in the Bulk Administration main menu to schedule and/or activate this job.

      Related References
      Related Information

      Delete EMCC devices

      You can use BAT to delete EMCC devices in bulk. Use the procedures to delete EMCC devices.

      Procedure
        Step 1   Choose Bulk Administration > EMCC > Delete EMCC.

        The Delete EMCC Configuration window displays.

        Step 2   Enter the number of devices to that you wish to delete in the Number of EMCC Devices to be deleted field.
        Step 3   In the Job Information area, enter the Job description.

        Delete EMCC is the default description.

        Step 4   To delete the EMCC devices immediately, click the Run Immediately radio button. Click Run Later to delete the devices at a later time.
        Step 5   To create a job for deleting the EMCC devices, click Submit.
        Step 6   Use the Job Scheduler option in the Bulk Administration main menu to schedule and/or activate this job.

        Related References
        Related Information