Cisco Unified CallManager Bulk Administration Guide, Release 5.0(2)
Deleting Forced Authorization Codes and Client Matter Codes
Downloads: This chapterpdf (PDF - 173.0KB) The complete bookPDF (PDF - 4.11MB) | Feedback

Deleting Forced Authorization Codes and Client Matter Codes

Table Of Contents

Deleting Forced Authorization Codes and Client Matter Codes

Deleting Code Settings

Deleting Forced Authorization Codes and Client Matter Codes

Related Topics


Deleting Forced Authorization Codes and Client Matter Codes


You can delete codes from the system by using a custom file that contains the codes that you want to delete. You can edit a custom file where you previously inserted or updated authorization codes, or you can create a new CSV file where you manually enter the codes that you want to delete.

To delete Forced Authorization Codes and Client Matter Codes, use the following procedures.

Deleting Code Settings

Deleting Forced Authorization Codes and Client Matter Codes

Deleting Code Settings

If you plan to edit an existing CSV file, you must update the file, so only the lines that contain the codes that you want to delete remain in the file.

Example for CMC (Existing CSV File)

You obtain a file that contains the following information, and you decide to delete the client matter codes, 5550, 5551, and 5555:

5550,Phil Jones DDS

5551,Southwest Shades

5552,Happy Pharmaceuticals

5553,Weddings by Joyce

5554,Peterson Plumbing

5555,Acme Toys

5556,Chicago Paralegals

Before you delete the entries, the file must contain only the following entries:

5550,Phil Jones DDS

5551,Southwest Shades

5555,Acme Toys

Example for CMC (New CSV File)

If you create a new file to delete the codes, list only the codes, separated by lines, as shown in the following example:

5550

5551

5555

Example for FAC (Existing CSV File)

You obtain a file that contains the following information, and you decide to delete the authorization codes that are assigned to John, Dave, and Bill:

1233,Sandy Brown,30

1234,John Smith,20

1235,Dave Green,30

1236,John David,20

1237,Alex Anderson,30

1238,Bill Jones,20

1239,Jennifer Summers,20

Before you can delete the entries for John, Dave, and Bill, the file must contain only the following entries:

1234,John Smith,20

1235,Dave Green,30

1238,Bill Jones,20

Example for FAC (New File)

If you create a new file to delete the codes, list only the codes, separated by lines, as shown in the following example:

1234

1235

1238

To delete batches of codes, see the "Deleting Forced Authorization Codes and Client Matter Codes" section.

Additional Topics

See the "Related Topics" section.

Deleting Forced Authorization Codes and Client Matter Codes

Before you Begin

Perform one of the following tasks:

Create a new file for codes that you want to delete, as described in the "Example for CMC (New CSV File)" section and "Example for FAC (Existing CSV File)" section.

On the Cisco Unified CallManager server download the appropriate CSV files from the first node of the Cisco Unified CallManager server. For more information, see "Uploading a File" section.

In Notepad, open and edit the existing CSV file to delete the entries.

Upload the modified CSV files to the first node of the Cisco Unified CallManager server. For more information, see "Uploading a File" section:

Procedure


Step 1 In Cisco Unified CallManager Administration, choose one of the following options, depending on whether you plan to delete client matter codes or forced authorization codes:

For CMC—Bulk Administration > Client Matter Codes > Delete Client Matter Codes

For FAC—Bulk Administration > Forced Authorization Codes > Delete Forced Authorization Codes

Step 2 Choose a custom file from the drop-down list box and click Find.

Step 3 The Find and List Client Matter Codes window or Find and List Forced Authorization window displays.

Step 4 In the Job Information area, enter the Job description.

Step 5 Click the Run Immediately radio button to generate a report immediately or, click Run Later to generate reports at a later time.

Step 6 Click Submit to create a job for deleting FAC and CMC.


Note Make sure that you browse the entire list of the displayed results before submitting the job for deletion.


Step 7 Use the Job Scheduler option in the Bulk Administration main menu to schedule and/or activate this job.

For more information on jobs, see the Chapter 51, "Scheduling Jobs."

For information on log files, see "BAT Log Files" section on page 54-3.


Additional Topics

See the "Related Topics" section.

Related Topics

CMC and FAC Configuration Checklist

Important BAT Considerations

Creating a CSV File by Using BAT.xlt

Using a Text Editor to Create the CSV Data File for Client Matter Codes and Forced Authorization Codes

Editing an Existing CMC or FAC CSV File

CMC and FAC CSV File Settings

Using BAT to Update the Cisco Unified CallManager Database

Deleting Code Settings