Bulk Administration Tool User Guide, Release 4.0(1)
Installing BAT
Downloads: This chapterpdf (PDF - 111.0 KB) The complete bookPDF (PDF - 902.0 KB) | Feedback

Installing BAT

Table Of Contents

Installing BAT

Prerequisites for BAT Installation

Running the BAT Installer

Uninstalling BAT

Installing BAT

This chapter provides the steps required for installing BAT. The BAT installation process now includes BAT Excel template files located in the BAT/Excel template folder. Copy and paste these templates where you have Microsoft Excel installed and use the templates from that location.

During the BAT installation or reinstallation, the setup program halts the following services:

IIS Admin

World Wide Web publishing

FTP publishing

These services automatically restart once the installation is complete.

Also, this chapter includes the uninstall procedure.

See "Tool for Auto-Registered Phones Support," for instructions on installing the Tool for Auto-Registered Phones Support (TAPS).

Related Topics

"Tool for Auto-Registered Phones Support"

Prerequisites for BAT Installation

Install BAT on the Cisco CallManager 3.0 with the primary publisher database. If BAT is installed on a database server, it must be on the primary publisher database server.

Running the BAT Installer

Follow these steps to install BAT:

Step 1 Log on to the system with administrator privileges.

Step 2 Double click on the BulkAdministrationTool.exe file.

Step 3 If you are reinstalling BAT, a dialog box displays the question
Do you want to reinstall BAT?
Click Yes to reinstall BAT.
Click No to exit the installation.

Step 4 Within the setup, click Next.

Step 5 The Choose Destination Folder dialog box displays.
Click Next to install the default destination folder C:\CiscoWebs\BAT.
To install into another folder, click Browse and select the required path.

Step 6 Click OK.

Step 7 Click Next.

Step 8 The installer displays a summary of your selections.
Click Next to continue.
Click Back to change your selections.

Step 9 Click OK. Display returns:
"Do you wish to install Tool for Auto-Registered Phones Support?"

Step 10 Click Yes or No to indicate whether you want to install TAPS.

Step 11 Click Finish once the installation process completes.

Uninstalling BAT

Perform the following steps to uninstall BAT.

Note Uninstalling BAT does not remove the available phone templates and datafiles.

Step 1 Choose Start Menu > Program Files > Cisco CallManager 3.0 > Bulk Admin Tool > UnInstall BAT.

A dialog box displays "Are you sure you want to completely remove BAT and all of its components?"

Step 2 Click Yes to uninstall BAT

A dialog box displays "Uninstall successfully completed." Continue to Step 3.

Click No to exit the uninstaller.

Step 3 Click OK.