Cisco Unified Communications Manager Administration Guide, Release 9.1(1)
E911 messages
Downloads: This chapterpdf (PDF - 1.03MB) The complete bookPDF (PDF - 9.6MB) | Feedback

E911 messages

E911 messages

Users of devices designated for off-premises use are first presented with various messages, which assure that users are aware of the need to provide correct location information.

The E911 Messages page allows you to view and edit the messages that can be displayed on an off-premise device. The Find-List for these messages is different than the traditional Find-List. Instead of listing individual messages, the list is shown as message sets based on the language, for example English, American. Selecting a language takes you to the page where you can edit and save the messages.

E911 messages setup

Users of devices designated for off-premises use are first presented with various messages, which assure that users are aware of the need to provide correct location information.

The E911 Messages page allows you to view and edit the messages that can be displayed on an off-premise device. The Find-List for these messages is different than the traditional Find-List. Instead of listing individual messages, the list is shown as message sets based on the language, for example English, American. Selecting a language takes you to the page where you can edit and save the messages.

Set up E911 Messages

Use the following procedure to select and edit E911 messages for off-premises devices using Unified CM.

Procedure
    Step 1   Choose System > E911 Messages.
    Step 2   Select the required language link of the E911 messages.

    The E911 Messages Configuration page displays the Agreement, Disclaimer, and Error messages.

    Step 3   Optionally, you can edit the E911 messages to be displayed on off-premises devices.
    Step 4   Click Save.