This chapter provides information about Cisco Unified
Communications. Multiple communication networks exist as entirely separate
entities, each serving a specific application. The traditional public switched
telephone network (PSTN) time-division multiplexing (TDM) network serves the
voice application; the Internet and intranets serve data communications.
Business requirements often force these networks to
interoperate. As a result, deploying multiservice (data, voice, and video)
applications such as unified messaging or web-based customer contact centers
requires expensive and complex links between proprietary systems, such as
private branch exchanges (PBXs) and standards-based data networks.
The traditional enterprise communication takes place on two
Over time, the Internet (and data networking technology in
general) encompassed the traditional traffic types. This convergence recently
started to absorb voice and video as applications into the data network.
Several large Post, Telephone, and Telegraph (PTT) carriers use packet
switching or voice over ATM as their backbone technology, and enterprise
customers accept virtual trunking, or connect their disparate PBXs via their
wide-area data network, to avoid long-distance charges.
Converging these previously disparate networks into a single,
unified network realizes savings in multiple areas, including lower total cost
of ownership, toll savings, and increased productivity.
Cisco Unified Communications Manager (formerly Cisco Unified CallManager) and
Cisco Unified IP Phones provide an IP telephony solution that operates on an IP
The clustering architecture of
Cisco Unified Communications Managers allows you to scale to a highly available
voice-over-IP (VoIP) network.
Cisco Unified Communications Support
Cisco Unified Communications support encompasses the following components:
Converged client devices
Service and support
Cisco Unified Communications solutions enable you to
Deploy IP-enabled business applications
Implement a standards-based open architecture
Migrate to a converged network in your own time frame
Cisco Unified Communications support enables you to move from maintaining a separate data network and a closed, proprietary voice PBX system to maintaining one open and standards-based, converged network for all your data, voice, and video needs.
Cisco Unity Connection-For more information about
Cisco Unity Connection, see the applicable
Cisco Unified Communications Manager SCCP Integration Guide for
Cisco Unity Connection or the
Cisco Unified Communications Manager SIP Trunk Integration Guide for
Cisco Unity Connection.
Video-IP-TV and IP-video conferencing products enable distance
learning and workgroup collaboration.
Cisco Unified IP-IVR-As an IP-powered interactive voice response
(IVR) solution, Cisco Unified IP-IVR, combined with Cisco IP Auto-Attendant,
provides an open and feature-rich foundation for delivering IVR solutions over
an IP network.
Cisco IP Communicator-The
Cisco IP Communicator, a software, computer-based phone, provides
communication capabilities that increase efficiency and promote collaboration.
Cisco Unified Communications Manager, a software-only call-processing application,
distributes calls and features and provides scalability.
Cisco Unified Communications Manager provides signaling and call-control services
to Cisco-integrated applications, as well as to third-party applications.
The following list shows the components of the infrastructure layer of Cisco Unified Communications:
Media convergence servers
General voice products for Cisco Unified Communications Solutions
Integrated IP telephony solution
Toll bypass products
IP protocols such as MGCP, H.323, and SIP
Cisco delivers the following IP-enabled communication devices:
Cisco Unified IP Video Phone 7985-supports SCCP
Cisco Unified IP Phone 7975-supports SCCP and SIP
Cisco Unified IP Phone 7970/7971-supports SCCP and SIP
Cisco Unified IP Phone 7962/7965-supports SCCP and SIP
Cisco Unified IP Phone 7960/7961-supports SCCP and SIP
Cisco Unified IP Phone 7942/7945-supports SCCP and SIP
Cisco Unified IP Phone 7940/7941-supports SCCP and SIP
Cisco Unified IP Phone 7931-supports SCCP
Cisco Unified Wireless IP Phone 7921-supports SCCP
Cisco Unified Wireless IP Phone 7920-supports SCCP
Cisco Unified IP Phone 7912-supports SCCP and SIP
Cisco Unified IP Phone 7911-supports SCCP and SIP
Cisco Unified IP Phone 7910-supports SCCP
Cisco Unified IP Phone 7906-supports SCCP and SIP
Cisco Unified IP Phone 7905-supports SCCP and SIP
Cisco Unified IP Phone 7902-supports SCCP
Cisco Unified IP Conference Station 7936
Cisco Unified IP Conference Station 7935
Cisco IP Communicator
Cisco Unified IP Phone Expansion Module 7914/7915/7916
Cisco also supports various third-party phones that are
running SIP. Contact your Cisco representative for more information.
Cisco Unified Communications Network
The Cisco Unified Communications network includes the following components:
Cisco Unified Communications Manager
Cisco Unified IP Phones
Power Over Ethernet (POE) switches
Digital gateways and trunks
Media Termination Point (MTP)
Music On Hold (MOH)
Inline power modules (10/100 Ethernet switching modules)
Cisco IP Communicator
Control from the Cisco Unified IP Phone to Cisco Unified Communications Manager uses SCCP client control protocol and, independently, desktop computer to Cisco Unified Communications Manager, as an H.323 gatekeeper that is using H.225/H.245 over transmission control protocol (TCP).