Cisco Unified Communications Manager Administration Guide, Release 9.0(1)
Resource Priority Namespace List setup
Downloads: This chapterpdf (PDF - 330.0KB) The complete bookPDF (PDF - 8.34MB) | Feedback

Resource Priority Namespace List setup

Resource Priority Namespace List setup

This chapter provides information to add, update, or delete Resource Priority Namespace Lists.

About Resource Priority Namespace List setup

In Cisco Unified Communications Manager Administration, use the System > MLPP > Namespace > Resource Priority Namespace List menu path to configure Resource Priority Namespace Lists.

Cisco Unified Communications Manager uses Resource Priority Namespace Lists to configure a default group of Resource Priority Namespace Network Domains to add to a SIP profile for validating incoming Resource Priority Namespace Network Domains.

Resource Priority Namespace List deletion

You cannot delete a Resource Priority Namespace List that any device is using. To find out which devices are using the Resource Priority Namespace List, from the Resource Priority Namespace List Configuration window, choose Dependency Records from the Related Links drop-down list box and click Go. If the dependency records are not enabled for the system, the dependency records summary window displays a message. If you try to delete an Resource Priority Namespace List that is in use, Cisco Unified Communications Manager displays an error message. Before deleting an Resource Priority Namespace List that is currently in use, you must perform either or both of the following tasks:

  • Assign a different Resource Priority Namespace List to any devices that are using the Resource Priority Namespace List that you want to delete.
  • Delete the devices that are using the Resource Priority Namespace List that you want to delete.

Resource Priority Namespace List settings

The following table describes the Resource Priority Namespace List settings.

Table 1 Resource priority namespace list settings

Field

Description

Name

Enter the name for the Resource Priority Namespace List. The maximum number of characters is 50.

Description

Enter a description for the list. The description can include up to 50 characters in any language, but it cannot include double-quotes ("), percentage sign (%), ampersand (&), back-slash (\), or angle brackets (<>).

Available Resource Priority Namespaces

Use the Up and Down Arrows to select or deselect already configured Resource Priority Namespace Network Domains.

Selected Resource Priority Namespaces

Displays the selected Resource Priority Namespace Network Domains.

Related Information