Cisco Unified Communications Manager Administration Guide, Release 8.6(1)
Called Party Transformation Pattern Configuration
Downloads: This chapterpdf (PDF - 99.0KB) The complete bookPDF (PDF - 14.14MB) | Feedback

Called Party Transformation Pattern Configuration

Table Of Contents

Called Party Transformation Pattern Configuration

Called Party Transformation Pattern Configuration Settings

Related Topics


Called Party Transformation Pattern Configuration


Use the following topics to configure a called party transformation pattern:

Called Party Transformation Pattern Configuration Settings

Related Topics

Called Party Transformation Pattern Configuration Settings

In Cisco Unified Communications Manager Administration, use the Call Routing > Transformation Pattern > Called Party Transformation Pattern menu path to configure called party transformation patterns.

The parameters in the Called Party Transformation Patterns window provide appropriate caller information by using the Called Party Transformation calling search space on the destination device. Be aware that calls through transformation patterns are not routable. When this pattern is matched, the call does not route to any device.


Note See the Local Route Groups chapter in the Cisco Unified Communications Manager Features and Services Guide for a discussion of called party transformation patterns and their use and configuration when the Local Route Group feature is configured.

Using the GUI

For instructions on how to use the Cisco Unified Communications Manager Administration Graphical User Interface (GUI) to find, delete, configure, or copy records, see the "Navigating the Cisco Unified Communications Manager Administration Application" section and its subsections, which explain how to use the GUI and detail the functions of the buttons and icons.

Configuration Settings Table

Table 48-1 describes the called party transformation pattern configuration settings. For related procedures, see the "Related Topics" section.

Table 48-1 Called Party Transformation Pattern Configuration Settings 

Field
Description
Pattern Definition

Pattern

Enter the transformation pattern, including numbers and wildcards (do not use spaces); for example, for NANP, enter 9.@ for typical local access, or 8XXX for a typical private network numbering plan. Valid characters include the uppercase letters A, B, C, and D and \+, which represents the international escape character +.

Note Ensure that the pattern is unique. Check the transformation pattern, route pattern, translation pattern, directory number, call park number, call pickup number, message waiting on/off, or meet me number if you receive an error that indicates duplicate entries. You can also check the route plan report.

See the "Wildcards and Special Characters in Route Patterns and Hunt Pilots" section in the Cisco Unified Communications Manager System Guide for more information about wildcards.

Partition

If you want to use a partition to restrict access to the transformation pattern, choose the desired partition from the drop-down list box. If you do not want to restrict access to the transformation pattern, choose <None> for the partition. See the "Partition Configuration" section for more information on how to use partitions.

You can configure the number of partitions that display in this drop-down list box by using the Max List Box Items enterprise parameter. If more partitions exist than the Max List Box Items enterprise parameter specifies, the Find button displays next to the drop-down list box. Click the Find button to display the Find and List Partitions window. Find and choose a partition name by using the procedure in the "Searching for a Partition" section.

Note Transformation patterns should be configured in different non- NULL partitions than dialing patterns such as route patterns and directory numbers. For transformation pattern lookups, the patterns in NULL partitions get ignored.

Note To set the maximum list box items, choose System > Enterprise Parameters and choose CCMAdmin Parameters.

Note Make sure that the combination of pattern, route filter, and partition is unique within the Cisco Unified Communications Manager cluster.

Description

Enter a description of the transformation pattern. The description can include up to 50 characters in any language, but it cannot include double-quotes ("), percentage sign (%), ampersand (&), or angle brackets (<>).

Numbering Plan

Choose a numbering plan.

Route Filter

If your transformation pattern includes the @ wildcard, you may choose a route filter. The optional act of choosing a route filter restricts certain number patterns.

The route filters that display depend on the numbering plan that you choose from the Numbering Plan drop-down list box.

You can configure the number of items that display in this drop-down list box by using the Max List Box Items enterprise parameter. If more route filters exist than the Max List Box Items enterprise parameter specifies, the Find button displays next to the drop-down list box. Click the Find button to display the Find and List Route Filters window. Find and choose a route filter name by using the "Route Filter Configuration Settings" section.

Note To set the maximum list box items, choose System > Enterprise Parameters and choose CCMAdmin Parameters.

Urgent Priority

Cisco Unified Communications Manager sets all called party transformation patterns with urgent priority, and you cannot change the priority of the patterns.

Called Party Transformations

Discard Digits

Choose the discard digits instructions that you want to be associated with this called party transformation pattern. The discard digits that display depend on the numbering plan that you choose from the Numbering Plan drop-down list box.

Called Party Transform Mask

Enter a transformation mask value. Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); the international escape character +; and blank. If this field is blank and the preceding field is not checked, no transformation takes place.

Prefix Digits

Enter prefix digits in the Prefix Digits (Outgoing Calls) field. Valid entries for the NANP include the digits 0 through 9, the wildcard characters asterisk (*) and octothorpe (#), the international escape character +, and blank.

Note The appended prefix digit does not affect which directory numbers get routed to the assigned device.

Called Party Number Type

Choose the format for the number type in called party directory numbers.

Cisco Unified Communications Manager sets the called party directory number (DN) type. Cisco recommends that you do not change the default value unless you have advanced experience with dialing plans such as NANP or the European dialing plan. You may need to change the default in Europe because Cisco Unified Communications Manager does not recognize European national dialing patterns. You can also change this setting when you are connecting to a PBX that expects the called directory number to be encoded to a non national type numbering plan.

Choose one of the following options:

Cisco Unified Communications Manager—Use when the Cisco Unified Communications Manager sets the directory number type.

Unknown—Use when the dialing plan is unknown.

National—Use when you are dialing within the dialing plan for your country.

International—Use when you are dialing outside the dialing plan for your country.

Subscriber—Use when you are dialing a subscriber by using a shortened subscriber number.

Called Party Numbering Plan

Choose the format for the numbering plan in called party directory numbers.

Cisco Unified Communications Manager sets the called DN numbering plan. Cisco recommends that you do not change the default value unless you have advanced experience with dialing plans such as NANP or the European dialing plan. You may need to change the default in Europe because Cisco Unified Communications Manager does not recognize European national dialing patterns. You can also change this setting when you are connecting to PBXs by using routing as a non national type number.

Choose one of the following options:

Cisco Unified Communications Manager—Use when the Cisco Unified Communications Manager sets the Numbering Plan in the directory number.

ISDN—Use when you are dialing outside the dialing plan for your country.

National Standard—Use when you are dialing within the dialing plan for your country.

Private—Use when you are dialing within a private network.

Unknown—Use when the dialing plan is unknown.


Additional Information

See the "Related Topics" section.

Related Topics

Called Party Transformation Pattern Configuration

Called Party Transformation Pattern Configuration Settings

Route Filter Configuration Settings

Calling Party Number Transformations Settings, Cisco Unified Communications Manager System Guide

Wildcards and Special Characters in Route Patterns and Hunt Pilots, Cisco Unified Communications Manager System Guide

Partition Configuration

Local Route Groups, Cisco Unified Communications Manager Features and Services Guide