LDAP Custom Filter Configuration
LDAP directory configuration takes place in these related windows:
•LDAP System Configuration
•LDAP Filter Configuration
Use the following topics to configure LDAP filter information:
•LDAP Filter Configuration Settings
LDAP Filter Configuration Settings
In Cisco Unified Communications Manager Administration, use the System > LDAP > LDAP Custom Filter menu path to configure LDAP filters.
In the LDAP Filter Configuration window, you specify information about the LDAP filter.
Before You Begin
Before you can synchronize the LDAP directory, you must activate the Cisco DirSync service. For information about how to activate services, see the Cisco Unified Serviceability Administration Guide.
fChanges to LDAP Directory information and LDAP Authentication settings are possible only if synchronization from the customer LDAP directory is enabled in the Cisco Unified Communications Manager Administration LDAP System Configuration window.
You can import and export LDAP custom filters by using the Bulk Administration Tool. For more information, see the Cisco Unified Communications Manager Bulk Administration Guide.
Tips About Deleting LDAP Filters
When you delete an LDAP filter, Cisco Unified Communications Manager removes that filter from the database.
You cannot delete an LDAP filter that is assigned to a directory agreement. To determine if an LDAP filter is assigned to a directory agreement, select Dependency Records from the Related Links drop-down list box in the LDAP Filter Configuration window. If any dependencies display for that LDAP filter, you cannot delete it.
Using the GUI
For instructions on how to use the Cisco Unified Communications Manager Administration Graphical User Interface (GUI) to find, delete, configure, or copy records, see the "Navigating the Cisco Unified Communications Manager Administration Application" section on page 1-13 and its subsections, which explain how to use the GUI and detail the functions of the buttons and icons.
Configuration Settings Table
Table 14-1 describes the LDAP filter configuration settings. For related procedures, see the "Related Topics" section.
Table 14-1 LDAP Custom Filter Settings
LDAP Custom Filter Information
Enter a name for the LDAP filter. The name can contain a maximum of 64 UTF-8 characters.
Enter a filter. The filter can contain a maximum of 1024 UTF-8 characters. Enclose the filter text within parentheses ().
The LDAP filter filters the results of LDAP searches. LDAP users that match the filter get imported into the Cisco Unified Communications Manager database, while LDAP users that do not match the filter do not get imported.
The filter text that you enter must comply with the regular LDAP search filter standards specified in RFC 4515. It is recommended that you verify the LDAP search filter against the LDAP directory/searchbase by using the ldapsearch command.
You apply LDAP filters to LDAP directories. For more information, see the "LDAP Directory Configuration" section on page 12-1. You can apply an LDAP filter to multiple LDAP directories, and to all LDAP directory types for which the filter is valid.
See the "Related Topics" section.
•LDAP Custom Filter Configuration
•LDAP Filter Configuration Settings
•Understanding the Directory, Cisco Unified Communications Manager System Guide
•LDAP System Configuration, page 11-1
•LDAP Directory Configuration, page 12-1
•LDAP Authentication Configuration, page 13-1
•Application Users and End Users, Cisco Unified Communications Manager System Guide
•Application User Configuration, page 87-1
•End User Configuration, page 88-1