Cisco Unified Communications Manager Administration Guide, Release 8.5(1)
Application Server Configuration
Downloads: This chapterpdf (PDF - 92.0KB) The complete bookPDF (PDF - 13.86MB) | Feedback

Application Server Configuration

Table Of Contents

Application Server Configuration

Application Server Configuration Settings

Related Topics


Application Server Configuration


The following topics provide information about working with and configuring application servers in Cisco Unified Communications Manager Administration:

Application Server Configuration Settings

Related Topics

Application Server Configuration Settings

In Cisco Unified Communications Manager Administration, use the System > Application Server menu path to configure application servers.

You can use the Application Server windows in Cisco Unified Communications Manager Administration to maintain associations between the Cisco Unified Communications Manager and off-cluster, external applications, such as Cisco Unity Connection, Cisco Unified Presence, and Cisco Emergency Responder, and to synchronize Cisco Unified Communications Manager systems and applications, such as Cisco Web Dialer.


Tip Application server configuration does not support Cisco Unity Connection 2.x. To push a list of valid user templates for Cisco Unity Connection 2.x to Cisco Unified Communications Manager, create an AXL connection via Cisco Unity Connection 2.x, as described in the System Administration Guide for Cisco Unity Connection.


Tips About Configuring Application Servers

You can configure the application servers in Cisco Unified Communications Manager Administration after both the Cisco Unified Communications Manager servers and any other application servers are set up and fully operational and are running with a valid configuration.


Note For Cisco Unity and Cisco Unity Connection, make sure that AXL is running on the Cisco Unified Communications Manager server that was configured to communicate with the Cisco Unity and Cisco Unity Connection server.


Using the GUI

For instructions on how to use the Cisco Unified Communications Manager Administration Graphical User Interface (GUI) to find, delete, configure, or copy records, see the "Navigating the Cisco Unified Communications Manager Administration Application" section on page 1-13 and its subsections, which explain how to use the GUI and detail the functions of the buttons and icons.

Configuration Settings Table

Table 23-1 describes all the available settings in the Application Server window. Because each server requires different settings, not all the settings in the table below apply to each server. For related procedures, see the "Related Topics" section.

Table 23-1 Application Server Configuration Settings 

Field
Description
Application Server Information

Application Server Type

Choose the applicable application server for the type of application to which you want to connect (for example, to connect to a presence application servers, choose Cisco Unified Presence).

 

Name

Enter a name to identify the application server that you are configuring.

IP Address

Enter the IP address of the server that you are configuring.

Note Ensure the IP address is numeric with a number pattern between 1-255 (10.255.172.57).

Tip For Cisco Unity and Cisco Unity Connection, you must use the same Administrator user name and password that you defined in Cisco Unity and Cisco Unity Connection Administration. This user ID provides authentication between Cisco Unity or Cisco Unity Connection and Cisco Unified Communications Manager Administration.

 

URL

Enter a URL for the application server.

End User URL

Enter a URL for the end users that are associated with this application server.

Available Application Users

This pane displays the application users that are available for association with this application server.

To associate an application user with this application server, select the application user (for example, CCMAdministrator, CCMSysUser, UnityConnection, and so on) and click the Down arrow below this pane.

Selected Application Users

This pane displays the application users that are associated with the application server. To remove an application user, select the application user and click the Up arrow above this pane. To add an application user, select an application user in the Available Application Users pane and click the Down arrow.


Additional Information

See the "Related Topics" section.

Related Topics

Application Server Configuration

Application Server Configuration Settings

Cisco Unity Messaging Integration, Cisco Unified Communications Manager System Guide

Application User Configuration, page 87-1