Cisco Unified Communications Manager Administration Guide, Release 8.0(2)
Enterprise Phone Configuration
Downloads: This chapterpdf (PDF - 325.0KB) The complete bookPDF (PDF - 18.29MB) | Feedback

Enterprise Phone Configuration

Table Of Contents

Enterprise Phone Configuration

Configuring Enterprise Phone Parameters


Enterprise Phone Configuration


In the Enterprise Phone Configuration window, you can configure parameters that will apply to all phones that support these parameters.

Configuring Enterprise Phone Parameters

To configure parameters in the Enterprise Phone Configuration window, follow these steps:

Procedure


Step 1 Choose System > Enterprise Phone Configuration.

Step 2 Update the parameter settings as desired.

Select the "Override Common Settings" box for each setting you wish to update. If you do not check this box, the corresponding parameter setting does not take effect.

To view the descriptions of all the enterprise phone parameters, click the ? button.

Step 3 To save the changes in the database, click Save.


Note Parameters that you set in this window may also appear in the Common Phone profile window and the Device Configuration window for various devices. If you set these same parameters in these other windows too, the setting that takes precedence is determined in the following order: 1) Device Configuration window settings, 2) Common Phone Profile window settings, 3) Enterprise Phone Configuration window settings.