Cisco Unified CallManager Administration Guide, Release 5.0(1)
License Unit Report
Downloads: This chapterpdf (PDF - 156.0KB) The complete bookPDF (PDF - 6.68MB) | Feedback

License Unit Report

Table Of Contents

License Unit Report

Generating a License Unit Report

Related Topics


License Unit Report


Use license unit report to display the total license capacity and the number of licenses in use. This tool generates a report that lists the total number of available licenses.


Note To know more about requesting licenses, refer to the Cisco CallManager System Guide.


Generating a License Unit Report

A unit license refers to a fixed number of license units that correspond to each phone type. For example, Cisco 7920 phones requires four license units and Cisco 7970 phones require five units. If you are provisioning four Cisco 7920 phones and four Cisco 7970 phones, then you require 36 phone license units.

The number of licensed units in the license file corresponds to number of unit licenses for all the phone types that are purchased.


Note To determine the number of license unit that are required for each device, choose System > Licensing > License Unit Calculator. This window lists the number of license units that are required for each type of device.


Use the following procedure to generate a report for the number of licenses that are available.

Procedure


Step 1 Choose System > Licensing > License Unit Report.

Step 2 The License Unit Report window displays. This window displays the number of phone licenses and number of node licenses that are available by:

Units Available

Units Used

Units Remaining


Additional Information

See the "Related Topics" section.

Related Topics

License Unit Report

Generating a License Unit Report

License Unit Calculator

License File Upload