Cisco CallManager Administration Guide, Release 3.3(2)
Meet-Me Number/Pattern Configuration
Downloads: This chapterpdf (PDF - 192.0KB) The complete bookPDF (PDF - 4.79MB) | Feedback

Meet-Me Number/Pattern Configuration

Table Of Contents

Meet-Me Number/Pattern Configuration

Adding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern

Meet-Me Number/Pattern Configuration Settings


Meet-Me Number/Pattern Configuration


Meet-Me conferences require an allocation of directory numbers. Cisco CallManager Administration provides the Meet-Me conference directory number range to users, so they can access the feature.

This section describes the following procedures:

Adding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern

Meet-Me Number/Pattern Configuration Settings

Adding a Meet-Me Number/Pattern

This section describes how to add a Meet-Me Number/Pattern.

Before You Begin

Make sure the following prerequisites are met before proceeding with the steps:

Configure the servers. See the "Server Configuration" section.

Configure the device pools. See the "Device Pool Configuration" section.

Procedure


Step 1 Choose Feature > Meet-Me Number/Pattern.

The Meet-Me Number/Pattern Configuration window displays.

Step 2 From the Meet-Me Number/Patterns list, click Add a New Directory Number/Pattern.

Step 3 Enter the appropriate settings as described in Table 36-1.

Step 4 Click Insert.

The window refreshes, and the new Meet-Me Number/Pattern appears in the list on the left side of the window.


Related Topics

Updating a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern

Adding a Software Conference Device

Adding a Hardware Conference Device

Adding a Cisco IOS Conference Bridge Device

Updating a Conference Device

Deleting a Conference Device

Updating Conference Bridge Parameters

Partition Configuration

Conference Bridges, Cisco CallManager System Guide

Updating a Meet-Me Number/Pattern

This section describes how to update a Meet-Me Number/Pattern.

Before You Begin

Make sure the following prerequisites are met before proceeding with the steps:

Configure the servers. See the "Server Configuration" section.

Configure the device pools. See the "Device Pool Configuration" section.

Configure the meet-me number/pattern. See the "Adding a Meet-Me Number/Pattern" section.

Procedure


Step 1 Choose Feature > Meet-Me Number/Pattern.

The Meet-Me Number/Pattern Configuration window displays.

Step 2 From the Meet-Me Numbers/Patterns list, choose the Meet-Me Number/Pattern that you want to update.

The pattern that you chose appears in the Directory Number or Pattern field.

Step 3 Update the appropriate settings as described in Table 36-1.


Note You can change the number or pattern as needed (example, changing 5000 to 500X).


Step 4 Click Update.

The window refreshes, and the pattern updates.


Related Topics

Adding a Software Conference Device

Adding a Hardware Conference Device

Adding a Cisco IOS Conference Bridge Device

Updating a Conference Device

Deleting a Conference Device

Updating Conference Bridge Parameters

Adding a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern

Partition Configuration

Conference Bridges, Cisco CallManager System Guide

Deleting a Meet-Me Number/Pattern

This section describes how to delete a Meet-Me Number/Pattern.

Before You Begin

Make sure the following prerequisites are met before proceeding with the steps:

Configure the servers.

Configure the device pools.

Configure the meet-me number/pattern.

Procedure


Step 1 Choose Feature > Meet-Me Number/Pattern.

The Meet-Me Number/Pattern Configuration window displays.

Step 2 From the Meet-Me Numbers/Patterns list, choose the Meet-Me Number/Pattern you want to delete.

Step 3 Click Delete.


Related Topics

Adding a Software Conference Device

Adding a Hardware Conference Device

Adding a Cisco IOS Conference Bridge Device

Updating a Conference Device

Deleting a Conference Device

Updating Conference Bridge Parameters

Adding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern

Conference Bridges, Cisco CallManager System Guide

Meet-Me Number/Pattern Configuration Settings

Table 36-1 describes the meet-me number/pattern configuration settings.

Table 36-1 Meet-Me Number/Pattern Configuration Settings 

Field
Description

Directory Number or Pattern

Enter a Meet-Me Numbers/pattern or a range of numbers (such as 8000 to 8009).

Partition

To use a partition to restrict access to the meet-me/number pattern, choose the desired partition from the drop-down list box.

If you do not want to restrict access to the meet-me number/pattern, choose <None> for the partition. See the "Partition Configuration" section for more information.

If more than 250 partitions exist, the ellipsis (...) button displays next to the drop-down list box. Click the ... button to display the Select Partition window. Enter a partial partition name in the List items where Name contains field. Click the desired partition name in the list of partitions that displays in the Select item to use box and click OK.

Note Make sure that the combination of meet-me number/pattern and partition is unique within the Cisco CallManager cluster.


Related Topics

Adding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern