Cisco CallManager Administration Guide, Release 3.2(1)
Meet-me Number/Pattern Configuration
Downloads: This chapterpdf (PDF - 144.0KB) The complete bookPDF (PDF - 5.3MB) | Feedback

Meet-Me Number/Pattern Configuration

Table Of Contents

Meet-Me Number/Pattern Configuration

Adding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern

Meet-Me Number/Pattern Configuration Settings


Meet-Me Number/Pattern Configuration


Meet-Me conferences require an allocation of directory numbers. The Cisco CallManager Administration provides the Meet-Me conference directory number range to users so they can access the feature.

Adding a Meet-Me Number/Pattern

This section describes how to add a Meet-Me Number/Pattern.

Before You Begin

Make sure the following prerequisites are met before proceeding with the steps:

Configure the servers. See the "Server Configuration" section.

Configure the device pools. See the "Device Pool Configuration" section.

Procedure


Step 1 Choose Service > Media Resource > Conference Bridge.

Step 2 Click Meet-Me Number/Pattern Configuration, from the top, right corner of the window.

The window refreshes and the Meet-Me Number/Pattern Configuration window appears.

Step 3 Enter the appropriate settings as described in Table 37-1.

Step 4 Click Insert.

The window refreshes, and the new Meet-Me Number/Pattern appears in the list on the left side of the window.


Related Topics

Updating a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern

Adding a Software Conference Device

Adding a Hardware Conference Device

Adding a Cisco IOS Conference Bridge Device

Updating a Conference Device

Deleting a Conference Device

Updating Conference Bridge Parameters

Partition Configuration

Conference Bridges, Cisco CallManager System Guide

Updating a Meet-Me Number/Pattern

This section describes how to update a Meet-Me Number/Pattern.

Before You Begin

Make sure the following prerequisites are met before proceeding with the steps:

Configure the servers. See the "Server Configuration" section.

Configure the device pools. See the "Device Pool Configuration" section.

Configure the meet-me number/pattern. See the "Adding a Meet-Me Number/Pattern" section.

Procedure


Step 1 Choose Service > Media Resource > Conference Bridge.

Step 2 Click Meet-Me Number/Pattern Configuration from the top, right corner of the window.

The Meet-Me Number/Pattern Configuration window appears.

Step 3 Choose the Meet-Me Number/Pattern you want to update from the Meet-Me Numbers/Patterns list.

The pattern you chose appears in the pattern field.

Step 4 Update the appropriate settings as described in Table 37-1.


Note You can change the number or pattern as needed (example, changing 5000 to 500X).


Step 5 Click Update.

The window refreshes, and the pattern is updated with the new route partition information.


Related Topics

Adding a Software Conference Device

Adding a Hardware Conference Device

Adding a Cisco IOS Conference Bridge Device

Updating a Conference Device

Deleting a Conference Device

Updating Conference Bridge Parameters

Adding a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern

Partition Configuration

Conference Bridges, Cisco CallManager System Guide

Deleting a Meet-Me Number/Pattern

This section describes how to delete a Meet-Me Number/Pattern.

Before You Begin

Make sure the following prerequisites are met before proceeding with the steps:

Configure the servers.

Configure the device pools.

Configure the meet-me number/pattern.

Procedure


Step 1 Choose Service > Media Resource > Conference Bridge.

Step 2 Click Meet-Me Number/Pattern Configuration from the top, right corner of the window.

The Meet-Me Number/Pattern Configuration window appears.

Step 3 Choose the Meet-Me Number/Pattern you want to delete from the Meet-Me Numbers/Patterns list.

Step 4 Click Delete.

A message displays stating that you are about to permanently delete this pattern and that this action cannot be undone.

Step 5 Click OK to continue, or Cancel to cancel the deletion.


Related Topics

Adding a Software Conference Device

Adding a Hardware Conference Device

Adding a Cisco IOS Conference Bridge Device

Updating a Conference Device

Deleting a Conference Device

Updating Conference Bridge Parameters

Adding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern

Conference Bridges, Cisco CallManager System Guide

Meet-Me Number/Pattern Configuration Settings

Table 37-1 describes the meet-me number/pattern configuration settings.

Table 37-1 Meet-Me Number/Pattern Configuration Settings 

Field
Description

Directory Number or Pattern

Enter a Meet-Me Numbers/pattern or a range of numbers (such as 8000 to 8009).

Partition

Select a partition. See the "Partition Configuration" section for more information.


Related Topics

Adding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern