Cisco CallManager Administration Guide, Release 3.0(5)
Configuring Call Pickup
Downloads: This chapterpdf (PDF - 120.0KB) The complete bookPDF (PDF - 4.81MB) | Feedback

Configuring Call Pickup

Table Of Contents

Configuring Call Pickup

Configuring Call Pickup

Adding a Call Pickup Group Number

Updating a Call Pickup Group Number

Deleting a Call Pickup Group Number

Assigning Directory Numbers to a Call Pickup Group


Configuring Call Pickup


Call pickup allows you to answer a call that comes in on a directory number other than your own. When you hear an incoming call ringing on another phone, you can redirect the call to your phone by using the call pickup feature.

There are two types of call pickup available on Cisco IP Phones:

Call Pickup allows users to pick up incoming calls within their own group. The appropriate call pickup group number is dialed automatically when a user activates this feature.

Group Call Pickup allows users to pick up incoming calls within their own group or in other groups. Users must dial the appropriate call pickup group number when using this feature.

The procedures are the same for configuring both of these features, and they are described in:

Configuring Call Pickup

Configuring Call Pickup

This section describes the general steps for configuring the call pickup feature. Subsequent sections of this chapter describe the steps in more detail.

Procedure


Step 1 Create a call pickup group number. For details, see the "Adding a Call Pickup Group Number" section.

Step 2 Assign the desired directory numbers to a call pickup group by using the call pickup group number you created in Step 1. For details, see the "Assigning Directory Numbers to a Call Pickup Group" section.

Step 3 Add a Call Pickup or Group Call Pickup button to the phone templates where needed. For details, see the Modifying Phone Button Templates.


Related Topics

Configuring Call Pickup

Adding a Call Pickup Group Number

Updating a Call Pickup Group Number

Deleting a Call Pickup Group Number

Assigning Directory Numbers to a Call Pickup Group

Adding a Call Pickup Group Number

This section describes how to add a call pickup group number to the Cisco CallManager database.

Procedure


Step 1 Open Cisco CallManager Administration.

Step 2 Select Feature > Call Pickup.

Step 3 Enter the directory number for the call pickup group you want to add.

Step 4 If you want to use a route partition to restrict access to the call pickup group, select the desired route partition from the drop-down list box. If you do not want to restrict access to the call pickup group, select None for the route partition.


Note The combination of call pickup group number and route partition must be unique within the Cisco CallManager cluster.


Step 5 Click Insert to save the new call pickup group number in the database.


Related Topics

Clusters, page 2-1

Configuring Call Pickup

Updating a Call Pickup Group Number

Deleting a Call Pickup Group Number

Assigning Directory Numbers to a Call Pickup Group

Updating a Call Pickup Group Number

This section describes how to update a call pickup group number.

Procedure


Step 1 Open Cisco CallManager Administration.

Step 2 Select Feature > Call Pickup.

Step 3 Select the call pickup group number you want to update.

Step 4 Make the desired changes in the fields you want to update. Before saving the changes, you can click Cancel to reset all fields to their original value.

Step 5 Click Update to save the changes in the database.


When you update a call pickup group number, it is automatically updated for all directory numbers assigned to that call pickup group.

Related Topics

Configuring Call Pickup

Adding a Call Pickup Group Number

Deleting a Call Pickup Group Number

Assigning Directory Numbers to a Call Pickup Group

Deleting a Call Pickup Group Number

This section describes how to delete a call pickup group number from the Cisco CallManager database.


Caution When you delete a call pickup group number, you disable the Call Pickup feature for all directory numbers assigned to that group. To enable Call Pickup again for those directory numbers, you must reassign each of them to a new call pickup group. For details, see the "Assigning Directory Numbers to a Call Pickup Group" section.

Procedure


Step 1 Open Cisco CallManager Administration.

Step 2 Select Feature > Call Pickup.

Step 3 Select the call pickup group number you want to delete.

Step 4 Click Delete.

The call pickup group is now removed from the list on the left side of the page.


Related Topics

Configuring Call Pickup

Adding a Call Pickup Group Number

Updating a Call Pickup Group Number

Assigning Directory Numbers to a Call Pickup Group

Assigning Directory Numbers to a Call Pickup Group

This section describes how to assign directory numbers to a call pickup group. Only directory numbers assigned to a call pickup group can use the Call Pickup feature.

Before You Begin

Before you can assign a directory number to a call pickup group, you must create a number for that group as described in:

Adding a Call Pickup Group Number

Procedure


Step 1 Open Cisco CallManager Administration.

Step 2 Select Device > Phone.

Step 3 Use the search capability to find a directory number that you want to assign to a call pickup group.

Step 4 Select the desired directory number to display the configuration information for the phone where that number appears.

Step 5 Select the line where the desired directory number appears.

Step 6 Select the desired call pickup group number from the Call Pickup Group drop-down list box.

Step 7 Repeat Step 2 through Step 6 for each directory number you want to assign to the call pickup group.


Related Topics

Configuring Call Pickup

Adding a Call Pickup Group Number

Updating a Call Pickup Group Number

Deleting a Call Pickup Group Number