Cisco CallManager Administration Guide, Release 3.0(5)
Configuring Partitions
Downloads: This chapterpdf (PDF - 115.0KB) The complete bookPDF (PDF - 4.81MB) | Feedback

Configuring Partitions

Table Of Contents

Configuring Partitions

Adding a Partition

Deleting a Partition


Configuring Partitions


A partition is a list of route patterns. Partitions facilitate call routing by dividing the route plan into logical subsets based on organization, location, and call type.

Use the following procedures to add or delete route partitions:

Adding a Partition

Deleting a Partition

Adding a Partition

The following procedure describes how to add a partition.

Procedure


Step 1 Open Cisco CallManager Administration.

Step 2 Select Route Plan > Partition in the menu bar.

Step 3 Enter a name in the Partition Name field. The name can consist of up to 50 alphanumeric characters, and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). Each partition name must be unique to the route plan.


Timesaver Use concise and descriptive names for your partitions. The CompanynameLocationCalltype format usually provides a sufficient level of detail and is short enough to enable you to quickly and easily identify a partition. For example, CiscoDallasMetroPT identifies a partition for toll free inter-LATA (Local Access and Transport Area) calls from the Cisco office in Dallas.


Step 4 Enter a description in the Description field. The description can consist of up to 50 alphanumeric characters, and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). If you do not enter a description, the partition name is automatically entered in this field.

Step 5 Click Insert to add the new partition. The new partition name is added to the partition list on the left side of the page, and the message "Status: Insert completed" is displayed.

Step 6 To add more partitions, click New and repeat Steps 3 through 5.


Related Topics

Deleting a Partition

Deleting a Partition

The following procedure describes how to delete a partition.

Procedure


Step 1 Open Cisco CallManager Administration.

Step 2 Select Route Plan > Partition in the menu bar.

Step 3 Select a name in the partition list on the left side of the page.

Step 4 Click Delete to remove the partition.


Caution Check carefully to ensure that you are deleting the correct partition before initiating this action. Deleted partitions cannot be recovered. If a partition is accidentally deleted, it must be rebuilt.

Step 5 A dialog box appears warning you that deleting this partition cannot be undone.

Step 6 Click OK to delete the partition, or click Cancel to cancel the action. If you click OK, the partition is deleted and the message "Status: Ready" is displayed.

Step 7 Repeat Steps 3 through 7 to delete other partitions.


Related Topics

Adding a Partition