Cisco CallManager Administration Guide, Release 3.0(1)
Calling Search Space
Downloads: This chapterpdf (PDF - 135.0KB) | Feedback

Calling Search Space

Table Of Contents

Calling Search Space

Adding a Calling Search Space

Updating a Calling Search Space

Copying a Calling Search Space

Deleting a Calling Search Space


Calling Search Space


A calling search space determines which partitions a calling device searches when attempting to complete a call.

Use the following procedures to add, update, copy, or delete a calling search space:

Adding a Calling Search Space

Updating a Calling Search Space

Copying a Calling Search Space

Deleting a Calling Search Space

Adding a Calling Search Space

The following procedure describes how to add a calling search space.

Procedure


Step 1 Open Cisco CallManager Administration.

Step 2 Select Route Plan > Calling Search Space in the menu bar.

Step 3 Enter a name in the Calling Search Space Name field. The name can consist of up to 50 alphanumeric characters, and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). Each calling search space name must be unique to the route plan.


Timesaver Use concise and descriptive names for your Calling search spaces. The CompanynameLocationCalltype format usually provides a sufficient level of detail and is short enough to enable you to quickly and easily identify a calling search space. For example, CiscoDallasMetroCS identifies a calling search space for toll free inter-LATA (Local Access and Transport Area) calls from the Cisco office in Dallas.


Step 4 Enter a description in the Description field. The description can consist of up to 50 alphanumeric characters, and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). If you do not enter a description, the calling search space name is automatically entered in this field.

Step 5 Select partitions in the Available Partitions list box and add them to the Selected Partitions list box by clicking the arrow buttons between the two list boxes.

Step 6 To move a partition, select a partition name in the Selected Partitions list box. Move the partition up or down in the list by clicking the arrows on the right side of the list box.

Step 7 Click Insert to add the new calling search space. The new calling search space name is added to the calling search space list on the left side of the page, and the message "Status: Insert completed" is displayed.

Step 8 To add more calling search spaces, click New and repeat Steps 3 through 7.


Related Procedures

Updating a Calling Search Space

Copying a Calling Search Space

Deleting a Calling Search Space

Updating a Calling Search Space

The following procedure describes how to update a calling search space.

Procedure


Step 1 Open Cisco CallManager Administration.

Step 2 Select Route Plan > Calling Search Space in the menu bar.

Step 3 Select a name in the calling search space list on the left side of the page.

Step 4 Add, remove, or reorder partitions in the Partitions list boxes by using the appropriate arrow buttons.

Step 5 Click Update.

Step 6 Repeat Steps 3 through 5 to update other calling search spaces.


Related Procedures

Adding a Calling Search Space

Copying a Calling Search Space

Deleting a Calling Search Space

Copying a Calling Search Space

The following procedure describes how to copy a calling search space.

Procedure


Step 1 Open Cisco CallManager Administration.

Step 2 Select Route Plan > Calling Search Space in the menu bar.

Step 3 Select a name in the calling search space list on the left side of the page.

Step 4 Click Copy.

Step 5 Modify the name in the Calling Search Space Name field. The name can consist of up to 50 alphanumeric characters, and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). Each calling search space name must be unique to the route plan.

Step 6 Modify the description in the Description field. The description can consist of up to 50 alphanumeric characters, and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_).

Step 7 Add, remove, or reorder partitions in the Partitions list boxes by using the appropriate arrow buttons.

Step 8 Click Insert to add the calling search space. The new calling search space name is added to the calling search space list on the left side of the page, and the message "Status: Insert completed" is displayed.

Step 9 To copy another calling search space, repeat Steps 3 through 8.


Related Procedures

Adding a Calling Search Space

Updating a Calling Search Space

Deleting a Calling Search Space

Deleting a Calling Search Space

The following procedure describes how to delete a calling search space.


Note You cannot delete calling search spaces that are being used by devices or translation patterns.


Procedure


Step 1 Open Cisco CallManager Administration.

Step 2 Select Route Plan > Calling Search Space in the menu bar.

Step 3 Select a name in the calling search space list on the left side of the page.

Step 4 Click Delete to remove the calling search space.


Caution Check carefully to ensure that you are deleting the correct calling search space before initiating this action. Deleted calling search spaces cannot be recovered. If a calling search space is accidentally deleted, it must be rebuilt.

Step 5 A dialog box appears warning you that deleting this calling search space cannot be undone.

Step 6 Click OK to delete the calling search space, or click Cancel to cancel the action. If you click OK, the calling search space is deleted and the message "Status: Ready" is displayed.

Step 7 Repeat Steps 3 through 7 to delete other calling search spaces.


Related Procedures

Adding a Calling Search Space

Updating a Calling Search Space

Copying a Calling Search Space