The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
This chapter provides information about the Cisco ATA 187 Analog Telephone Adaptor functions as an analog telephone adapter that interfaces regular analog telephones to IP-based telephony networks. The Cisco ATA converts any regular analog telephone into an Internet telephone. Each adapter supports two voice ports, each with its own telephone number.
The Cisco ATA 187 Analog Telephone Adaptor functions as an analog telephone adapter that interfaces regular analog telephones to IP-based telephony networks. The Cisco ATA converts any regular analog telephone into an Internet telephone. Each adapter supports two voice ports, each with its own telephone number.
The following list describes the Cisco ATA:
Contains a single 10 BaseT RJ-45 port and two RJ-11 FXS standard analog telephone ports
Supports G.711 alaw, G.711 mulaw, and G.723 and G.729a voice codecs
Uses the Skinny Client Control Protocol
Converts voice into IP data packets that are sent over a network
Supports redial, speed dial, call forwarding, call waiting, call hold, transfer, conference, voice messaging, message-waiting indication, off-hook ringing, caller-ID, callee-ID, and call waiting caller-ID
Like other IP devices, the Cisco ATA receives its configuration file and list of Cisco Unified Communications Managers from the TFTP server. If the TFTP server does not have a configuration file, the Cisco ATA uses the TFTP server name or IP address and port number as the primary Cisco Unified Communications Manager name or IP address and port number.
After the Cisco ATA initializes, both ports on the Cisco ATA (skinny clients) attempt to connect with the primary Cisco Unified Communications Manager. If the connection or registration fails, the Cisco ATA skinny clients attempt to register with the next Cisco Unified Communications Manager in the Cisco Unified Communications Manager list. If that connection fails, the Cisco ATA skinny clients attempt to register with the last Cisco Unified Communications Manager in the list. If all attempts to connect and register with a Cisco Unified Communications Manager fail, the client attempts to connect at a later time.
Upon successful registration, the Cisco ATA client requests the Cisco Unified Communications Manager software version, current time and date, line status, and call forward status from the Cisco Unified Communications Manager. If the Cisco ATA loses connection to the active Cisco Unified Communications Manager, it attempts to connect to a backup Cisco Unified Communications Manager in the Cisco Unified Communications Manager list. When the primary Cisco Unified Communications Manager comes back online, the Cisco ATA attempts to reconnect to it.